Both sides previous revision
Previous revision
Next revision
|
Previous revision
Next revision
Both sides next revision
|
boardinventory [2018/06/13 19:48] plasmo |
boardinventory [2019/01/10 05:02] b1ackmai1er [EuroCard Bus (ECB) Boards] |
| |
^Board / Component^Stock^Price^Order Contact^Notes| | ^Board / Component^Stock^Price^Order Contact^Notes| |
|[[:boards:sbc:minimax8085:start|MiniMax8085]][[:boards:sbc:minimax8085:start| PCB]]| 12 \\ \\ 8| $5| \\ Sergey Kiselev \\ \\ Phillip Summers| | | |[[:boards:sbc:minimax8085:start|MiniMax8085]][[:boards:sbc:minimax8085:start| PCB]]| 12 | $5 |Sergey Kiselev | | |
|[[:builderpages:rhkoolstar:sbc-2g-512|]]|7|$5|Phillip Summers|Rienk Koolstar's Z80 SBC based on Grant Searle's 9 chip breadboard design. | | | | 5 |$5 USD |Phillip Summers | | |
| |[[:builderpages:rhkoolstar:sbc-2g-512|]] | 2 | $5 USD |Phillip Summers|Rienk Koolstra's Z80 SBC inspired by Grant Searle's 9 chip breadboard design. | |
| | | 4 | $5 |Rienk Koolstra |price includes shipping | |
| | | | | | | |
| |
==== MPU302, Repurposed Soneplex SPX-MPU board for CP/M-68K ==== | ==== MPU302, Repurposed Soneplex SPX-MPU board for CP/M-68K ==== |
| |
^**Board** ^**Stock** ^**Price** ^**Order Contact** ^**Notes** | | ^**Board** ^**Stock** ^**Price** ^**Order Contact** ^**Notes** | |
|[[:boards:sbc:mpu302|MPU302]]|1|$100|Bill Shen|Pre-programmed and tested with CP/M 68K ver 1.3. Board ready to run.| | |[[:boards:sbc:mpu302|MPU302]]|1|$50|Bill Shen|Pre-programmed and tested with CP/M 68K ver 1.3. Board ready to run.| |
| |
==== Tiny68K, Rev2, 68000 SBC, 16 Meg Memory, CP/M 68K Ready ==== | ==== Tiny68K, Rev2, 68000 SBC, 16 Meg Memory, CP/M 68K Ready ==== |
|[[:boards:sbc:tiny68k:tiny68k_rev2|Tiny68K]], rev2|1|$50|Bill Shen|Assembled and tested with CP/M 68K ver 1.3. A Compact Flash card included| | |[[:boards:sbc:tiny68k:tiny68k_rev2|Tiny68K]], rev2|1|$50|Bill Shen|Assembled and tested with CP/M 68K ver 1.3. A Compact Flash card included| |
|Tiny68k_r2 Kit|0|$30|Bill Shen|PC board with all SMT components soldered, remaining DIP components and sockets in kit form, CF card not included| | |Tiny68k_r2 Kit|0|$30|Bill Shen|PC board with all SMT components soldered, remaining DIP components and sockets in kit form, CF card not included| |
|Tiny68k_r2 PCB|8|$5|Phillip Summers|Silver plated edge connectors only.| | |Tiny68k_r2 PCB|7|5 USD|Phillip Summers|Silver plated edge connectors only.| |
| |
==== Multicomp ==== | ==== Multicomp ==== |
| |
^Board^Stock^Price^Order Contact^Notes| | ^Board^Stock^Price Currency^Order Contact^Notes| |
|[[:boards:sbc:multicomp:cycloneii-c:start|Multicomp IIc]]|8|$5|Phillip Summers|v1.10 Protoboards ex dirtypcb.com.| | |[[:boards:sbc:multicomp:cycloneii-c:start|Multicomp IIc]] | 3 | $5 USA |Phillip Summers |v1.10 boards | |
| |[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:rhkoolstar:cycloneiv.jpg|Muliticomp IV]] | 1 | $5 |Rienk Koolstra |price includes shipping – see [[:builderpages:rhkoolstar:start|main page]] | |
| |
| ==== AVR Based board ==== |
| |
| ^Board^Stock^Price Currency^Order Contact^Notes| |
| |[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:rhkoolstar:cpmega88.jpg|CP/Mega88]] | 11 | $2 |Rienk Koolstra |AVR implementation of Takashi Toyoshima's CP/Mega88 in SMD \\ price includes shipping - see [[:builderpages:rhkoolstar:start|main page]] | |
| |
| ===== EuroCard Bus (ECB) Boards ===== |
| |
| ^Board / Component^Stock^Price Currency^Order Contact^Notes| |
| |[[:boards:ecb:cassette_intf:start|Cassette Interface]]| | $20 | | | |
| |[[:boards:ecb:diskio-v3:start|Disk I/O V3]] | 20 | $10 |Todd Goodman | | |
| | | 6 | 10 USD |Phil Summers| | |
| |[[:boards:ecb:propio:start|Prop I/O V2]]| 20 | $20 |Wayne Warthen| | |
| | | 1 | 12 € |Jordi Solís| | |
| |[[:boards:ecb:backplane-8:start|ECB Backplane (8 slot)]]| 11 | 20 USD |John Coffman|167mm version, 1/8" thickness| |
| | | 32 | |Rich Cini |co-stocked for mini-68k | |
| |[[:boards:ecb:backplane-3:start|ECB Mini Backplane (3 slot)]]| 3 | 5 USD |Phil Summers| | |
| | | 50 | $5 |Will Sowerbutts|New stock November 2018: 1.6mm, HASL lead solder finish.| |
| |[[:builderpages:b1ackmai1er:backplane-4|ECB Mini Backplane (4 slot 10×10)]]| 7 | $5 |Phil Summers| | |
| |[[:boards:sbc:sbc_v2:start|SBC V2]]| 2 | 10 USD |Phil Summers| | |
| | | 5 | 12 € |Jordi Solis | | |
| |[[:boards:sbc:sbc-188:start|SBC-188]] | 0 | $20 |Todd Goodman | | |
| |4MEM | | $20 | | | |
| |[[:boards:ecb:protoboard_iii:protoboard_iii|Prototyping Board III]] | 4 | $15 |Ewout Ros | | |
| |[[:boards:ecb:protoboard_iii:protoboard_iii|Prototyping Board III]] | 16 | $15 |John Coffman | | |
| |[[:boards:ecb:zilog-peripherals:start|Zilog Peripherals]] | 5 | 10 USD |Phil Summers | | |
| |[[:boards:ecb:scg:start|Sprites Color Graphics and Sound v02 (SCGS)]] | 1 | 12 € |Jordi Solís | | |
| |[[:boards:ecb:scg:start|Sprites Color Graphics and Sound v03 (SCGS)]] | 3 | 10 USD |Phil Summers | | |
| |[[:boards:ecb:bus-monitor:start|ECB Bus Monitor]] | 20 | $20 |Todd Goodman | | |
| |MSX Cartridge reader | | $20 | | | |
| |[[:boards:ecb:dsky:start|DSKY V2]] | | $20 | | | |
| |[[:boards:ecb:vdu:start|VDU]] |5| 10 USD |Phil Summers | | |
| |[[:boards:ecb:ramfloppy:start:r12|ECB RAM-Floppy R11]] |5 |10 USD |Phil Summers | | |
| |[[:boards:ecb:4pio:start|ECB 4PIO R03]] | 3 | 10 USD |Phil Summers |Note [[:boards:ecb:4pio:errata|Errata]] with the R03 board. | |
| |[[:boards:ecb:modprn:start|ECB ModPrn R03]] | | | | | |
| |[[:boards:ecb:mf-pic:start|ECB MF/PIC (68K Multifunction)]] | 29 | $20 |Rich Cini |v3.1-008 (20) and v3.1-007 (9). Includes National Semiconductor PIC chip with purchase. | |
| |[[http://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/48860720/35269969/index.htm|ECB Dual IDE with FDC]] | 8 | $20 |Rich Cini |v2.0-006 | |
| |[[:boards:ecb:adio:start|ECB A/D-I/O]] | 4 | $20 |Rich Cini |v1.0-001 | |
| |[[http://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/48860720/35845601/index.htm|uPD7220 V2]] | | $20 | | | |
| |[[:boards:ecb:backplane-12:start|ECB Extended Backplane (12 slot)]] | 1 | $22 |Jordi Solís | | |
| |ECB Advanced Prototyping board | | $20 | | | |
| |N8VEM Mini SBC v8 | | $20 | | | |
| |[[:boards:ecb:mini-68k:start|ECB Mini-68K]] | 28 | $20 |Rich Cini |v2.0-007; requires MF/PIC board to operate. | |
| |[[:boards:ecb:cvdu:start|ColorVDU V2]] | 14 | $20 |Wayne Warthen | | |
| |[[:boards:ecb:vga3:vga3|ECB VGA3]] | 18 | $25 |John Coffman |4-layer board; let me know if you need pre-programmed GAL's. | |
| |[[:boards:sbc:n8:n8|N8 Home Computer (ECB HC3v2)]] | 20 | $20 |Todd Goodman | | |
| |[[:boards:ecb:dual-sd-card:start|ECB Dual SD Card]] | 12 | $20 |John Coffman | | |
| |[[:boards:sbc:z180_mark_iv:z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]] | 8 | $15 USD |Phil Summers | | |
| |[[:boards:sbc:sbc-386ex:rev2.0|ECB SBC-386EX V2.0]] | 7 | $15 USD |Phil Summers | | |
| |[[:boards:ecb:backplane-505-6508:start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]] | 0 | $35 |John Coffman |contact me if you want the Gerber files to manufacture this board | |
| |[[:boards:ecb:kiss-68030:start|ECB MC68030 CPU & memory (KISS030)]] | 20 | $25 |Rich Cini |v1.0-006; requires MF/PIC board | |
| |[[:boards:ecb:4uart-usb:start|ECB 4UART-USB]] | 13 | $20 |John Coffman | | |
| |[[:boards:ecb:usb-fifo:start|ECB USB FIFO]] | 30 | $6 |Will Sowerbutts |New stock November 2018 | |
| |[[:boards:sbc:6x0x-atx-6u:start|ECB 6x0x-ATX-6U]] | 0 | $20 |Andrew Bingham |May do another run if there is interest. | |
| |[[:builderpages:trick-1:start|ECB TRAM Carrier v0.5]] | 9 | $15 |Richard Edwards |Supports 4 INMOS TRAM's. Required Host Link Adapter and TRAM Modules (AUS) | |
| |[[:boards:sbc:65c816_ecb_sbc:65c816_ecb_sbc|ECB 65c816 SBC]] | 15 | $20 |Dan Werner |note the logic family on the board – U6 must be HCT! | |
| |[[:boards:ecb:bus-extender:start|ECB Bus Extender]] | 4 | $15 |Richard Edwards |note - extender board has row A and C. Row B is not part of the design although ribbon cable can be used to bring row B through. (AUS) | |
| |
===== EuroCard Bus (ECB) Boards ===== | \\ |
| |
^Board / Component ^ Stock ^ Price ^Order Contact ^Notes | | |
|[[:boards:ecb:cassette_intf:start|Cassette Interface]]| | $20 | | | | |
|[[:boards:ecb:diskio-v3:start|Disk I/O V3]]| \\ 20 \\ \\ 8 | \\ $10 \\ \\ 10 | \\ Todd Goodman \\ \\ Phil Summers| | | |
|[[:boards:ecb:propio:start|Prop I/O V2]]| 20 \\ \\ 2 | $20 |Wayne Warthen \\ Jordi Solís| | | |
|[[:boards:ecb:backplane-8:start|ECB Backplane (8 slot)]]| 11 \\ 32 | $20 USA |John Coffman \\ Rich Cini|167mm version \\ co-stocked for mini-68k| | |
|[[:boards:ecb:backplane-3:start|ECB Mini Backplane (3 slot)]]| 3 | $5 |Phil Summers|(Will Sowerbutts also accumulating orders – will order another batch soon.)| | |
|[[:builderpages:b1ackmai1er:backplane-4|ECB Mini Backplane (4 slot 10x10)]]| 9 | $5 |Phil Summers |Beta boards - looking for testers. | | |
|[[:boards:sbc:sbc_v2:start|SBC V2]]| 2 | $10 |Phil Summers | | | |
|[[:boards:sbc:sbc-188:start|SBC-188]]| 0 | $20 |Todd Goodman| | | |
|4MEM| | $20 | | | | |
|[[:boards:ecb:protoboard_iii:protoboard_iii|Prototyping Board III]]| 4 \\ 17 | $15 |Ewout Ros \\ John Coffman|A new production run has arrived | | |
|[[:boards:ecb:zilog-peripherals:start|Zilog Peripherals]]|9 | $10 |Phil Summers |Beta boards - looking for testers. | | |
|[[:boards:ecb:scg:start|Sprites Color Graphics and Sound v02 (SCGS)]]| 1 | $20 |Jordi Solís | | | |
|[[:boards:ecb:bus-monitor:start|ECB Bus Monitor]]| 20 | $20 |Todd Goodman| | | |
|MSX Cartridge reader| | $20 | | | | |
|[[:boards:ecb:dsky:start|DSKY V2]]| | $20 | | | | |
|VDU| | $20 | | | | |
|[[:boards:ecb:ramfloppy:start|ECB RAM-Floppy R11]]| 0 | $24 |Wolfgang Kabatzke|R13 with GAL currently in development. Design is finished, but no production and test| | |
|[[:boards:ecb:4pio:start|ECB 4PIO R03]]| 0 | $24 |Wolfgang Kabatzke|R03 is redesign of R02 with jumpers, no DIP-switches, and optimized Look-ahead-carry-logic, not tested yet| | |
|[[:boards:ecb:modprn:start|ECB ModPrn R03]]| 0 | $24 |Wolfgang Kabatzke|R02 actual in test, R03 is redesign of R02 with jumpers, no DIP-switches and error correction ( 5V and GND on 74LS27) and SUB-D9 male connectors like PC| | |
|[[:boards:ecb:mf-pic:start|ECB MF/PIC (68K Multifunction)]]| 29 | $20 |Rich Cini|v3.1-008 (20) and v3.1-007 (9). Includes National Semiconductor PIC chip with purchase.| | |
|[[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/48860720/35269969/index.htm|ECB Dual IDE with FDC]]| 8 | $20 |Rich Cini|v2.0-006| | |
|[[:boards:ecb:adio:start|ECB A/D-I/O]]| 4 | $20 |Rich Cini|v1.0-001| | |
|[[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/48860720/35845601/index.htm|uPD7220 V2]]| | $20 | | | | |
|[[:boards:ecb:backplane-12:start|ECB Extended Backplane (12 slot)]]| 2 | $25 |Jordi Solís | | | |
|ECB Advanced Prototyping board| | $20 | | | | |
|N8VEM Mini SBC v8| | $20 | | | | |
|[[:boards:ecb:mini-68k:start|ECB Mini-68K]]| 28 | $20 |Rich Cini|v2.0-007; requires MF/PIC board to operate.| | |
|[[:boards:ecb:cvdu:start|ColorVDU V2]]| 14 | $20 |Wayne Warthen| | | |
|[[:boards:ecb:vga3:vga3|ECB VGA3]]| 18 | \\ $25 USA |John Coffman|4-layer board; let me know if you need pre-programmed GAL's.| | |
|[[:boards:sbc:n8:n8|N8 Home Computer (ECB HC3v2)]]| 20 | $20 |Todd Goodman| | | |
|[[:boards:ecb:dual-sd-card:start|ECB Dual SD Card]]| 12 | $20 USA |John Coffman| | | |
|[[:boards:sbc:z180_mark_iv:z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]]| 0 | $25 USA |John Coffman|single board computer w/ IDE8 & SDcard| | |
|[[:boards:ecb:backplane-505-6508:start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]]| 0 | $35 |John Coffman|contact me if you want the Gerber files to manufacture this board| | |
|[[:boards:ecb:kiss-68030:start|ECB MC68030 CPU & memory (KISS030)]]| 20 | $25 |Rich Cini|v1.0-006; requires MF/PIC board| | |
|[[:boards:ecb:4uart-usb:4-uart-usb|ECB 4UART-USB]]| 13 | $20 USA |John Coffman| | | |
|[[:boards:ecb:usb-fifo:start|ECB USB FIFO]]| 3 | $6 |Will Sowerbutts| | | |
|[[:boards:sbc:6x0x-atx-6u:start|ECB 6x0x-ATX-6U]]| 0 | $20 |Andrew Bingham|May do another run if there is interest.| | |
|[[:builderpages:trick-1:start|ECB TRAM Carrier v0.5]]| 9 | $15 |Richard Edwards|Supports 4 INMOS TRAM's. Required Host Link Adapter and TRAM Modules (AUS)| | |
|[[:boards:sbc:65c816_ecb_sbc:65c816_ecb_sbc|ECB 65c816 SBC]]| 15 | $20 |Dan Werner|note the logic family on the board – U6 must be HCT!| | |
|[[:boards:ecb:bus-extender:start|ECB Bus Extender]]| 4 | $15 |Richard Edwards|note - extender board has row A and C. Row B is not part of the design although ribbon cable can be used to bring row B through. (AUS)| | |
| |
===== S-100 Bus Boards ===== | ===== S-100 Bus Boards ===== |
| |
^Board / Component^ Stock ^ Price ^Order Contact^Notes| | ^Board / Component^ Stock ^ Price ^Order Contact^Notes| |
|Regular Prototyping Board| |$20| | | | |Regular Prototyping Board| | $20 | | | |
|Buffered Prototyping Board v3.0a| 20 |$20|Todd Goodman | | | |Buffered Prototyping Board v3.0a| 20 | $20 |Todd Goodman | | |
|Buffered Prototyping Board Mini Sea of PTH's| 30 | $20 |Josh Bensadon| | | |Buffered Prototyping Board Mini Sea of PTH's| 30 | $20 |Josh Bensadon| | |
|Backplane (9 slot, terminated) - V4| 20 | $15 |Todd Goodman| | | |Backplane (9 slot, terminated) - V4| 20 | $15 |Todd Goodman| | |
|Backplane (Antony's 18 slot, terminated) - V2| 20 | $32 |Todd Goodman| | | |Backplane (Antony's 18 slot, terminated) - V2| 20 | $32 |Todd Goodman| | |
|Dual IDE - Version 03a|20 | $20 |Todd Goodman | | | |Dual IDE - Version 03a| 20 | $20 |Todd Goodman | | |
|Parallel ASCII Keyboard| | $20 | | | | |Parallel ASCII Keyboard| | $20 | | | |
|4MB SRAM| 18 | $20 |Gary Kaufman| | | |4MB SRAM| 18 | $20 |Gary Kaufman| | |
|——HP5082 Display Board for SMB| 20 | $10 |Todd Goodman| | | |——HP5082 Display Board for SMB| 20 | $10 |Todd Goodman| | |
|Bus Extender - V2| 20 | $20 |Todd Goodman| | | |Bus Extender - V2| 20 | $20 |Todd Goodman| | |
|RAM & ROM - Version 02| | $20 | | | | |RAM & ROM - v2.0b| 20 | $20 |Todd Goodman| | |
|Serial I/O| | $20 | | | | |Serial I/O v3.1| 20 | $20 |Todd Goodman | | |
|PIC/RTC| | $20 | | | | |PIC/RTC| | $20 | | | |
|IMSAI MPU-A CPU Board (8080A) reproduction of original| 20 | $30 |Gary Kaufman| | | |IMSAI MPU-A CPU Board (8080A) reproduction of original| 20 | $30 |Gary Kaufman| | |
|Propeller Based Console I/O - Version 02| | $20 | | | | |Propeller Based Console I/O - v2.51| 20 | $20 |Todd Goodman | | |
|Altair 8800 CPU Board (8080A) reproduction of original| 30 | $30 |Gary Kaufman| | | |Altair 8800 CPU Board (8080A) reproduction of original| 30 | $30 |Gary Kaufman| | |
|68000/68010 CPU board| | $20 | | | | |68000/68010 CPU board v1.03b| 20 | $20 |Todd Goodman | | |
|8086 Master/Slave CPU Board| 20 | $20 |Gary Kaufman| | | |8086 Master/Slave CPU Board| 20 | $20 |Gary Kaufman| | |
|6502 CPU board| 20 | $20 |Todd Goodman| | | |6502 CPU board| 20 | $20 |Todd Goodman| | |
| |16MB SRAM - v6.0a| 20 | $20 |Todd Goodman| | |
| |—- Mezzanine Board for SRAM - V06d| 60 | $3 |Todd Goodman| | |
|16MB SRAM - V1| 60 | $15 |Todd Goodman| | | |16MB SRAM - V1| 60 | $15 |Todd Goodman| | |
|—-Mezzanine board for SRAM - V06C| 3 | $3 |Todd Goodman| | | |—-Mezzanine board for SRAM - V06C| 3 | $1 |Todd Goodman| | |
|Parallel I/O Board V2| 20 | $20 |Todd Goodman| | | |Parallel I/O Board V2| 20 | $20 |Todd Goodman| | |
|Bus Terminator| 20 | $20 |Todd Goodman| | | |Bus Terminator| 20 | $20 |Todd Goodman| | |
|S-100 Bus Breakout Board| 75 | $5 |Don Caprio|Board In production| | |S-100 Bus Breakout Board| 75 | $5 |Don Caprio|Board In production| |
|S-100 OPL3 V1| 20 | $17 |Todd Goodman| | | |S-100 OPL3 V1| 20 | $17 |Todd Goodman| | |
|S-100 V2 MSX2 UTILITY Board| 9 | $20 |Jordi Solis|Looking for Beta tester | | |S-100 V2 MSX2 UTILITY Board| 9 | 15 € |Jordi Solis|Looking for Beta tester | |
| |Z-80 SBC v1.1a| 20 | $20 |Todd Goodman| | |
| |Z-80 Master v2.01| 20 | $20 |Todd Goodman| | |
| |ZFDC v1.0b| 20 | $20 |Todd Goodman| | |
| |8088 Master v2 (Marked "Version 01" on silkscreen)| 20 | $20 |Todd Goodman| | |
| |80286 v2| 20 | $20 |Todd Goodman| | |
| |80386 v2.31| 20 | $20 |Todd Goodman| | |
| |32/64MB OTT RAM v3.11b| 20 | $26 |Todd Goodman| | |
| |PDP11 CPU v2| 20 | $20 |Todd Goodman| | |
| |PDP11 Support v1.01| 20 | $20 |Todd Goodman| | |
| |
===== ISA Bus Boards ===== | ===== ISA Bus Boards ===== |
|MSX EPROM Cartridge| |$5| | | | |MSX EPROM Cartridge| |$5| | | |
|Zeta/Z80-2-ECB Prototypes|2|$12|Andrew Bingham| | | |Zeta/Z80-2-ECB Prototypes|2|$12|Andrew Bingham| | |
|[[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/38282303/95749082/index.htm|Elm GAL Programmer]]| 8 \\ \\ 9 \\ \\ 8| 7 \\ \\ 5 \\ \\ 5| Jordi Solís \\ \\ Doug Gabbard \\ \\ Phillip Summers| [[http://elm-chan.org/works/pgal/report_e.html|http://elm-chan.org/works/pgal/report_e.html]] \\ \\ [[http://www.retrotechnology.com/herbs_stuff/gal.html|http://www.retrotechnology.com/herbs_stuff/gal.html]] \\ \\ [[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/82152589/Programmable logic devices - v1.6.pdf|https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/82152589/Programmable%20logic%20devices%20-%20v1.6.pdf]] | | |[[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/38282303/95749082/index.htm|Elm GAL Programmer]]| 7 \\ \\ 8| 5 € \\ \\ 5| Jordi Solís \\ \\ Phillip Summers| [[http://elm-chan.org/works/pgal/report_e.html|http://elm-chan.org/works/pgal/report_e.html]] \\ \\ [[http://www.retrotechnology.com/herbs_stuff/gal.html|http://www.retrotechnology.com/herbs_stuff/gal.html]] \\ \\ [[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/82152589/Programmable logic devices - v1.6.pdf|https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/82152589/Programmable logic devices - v1.6.pdf]] | |
|CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board | | |CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board | |
|[[:boards:other:idecf2din:start|CF-IDE daughterboard]] for MPU302|2|$10|Bill Shen|Assembled and tested, CF disk not included. | | |[[:boards:other:idecf2din:start|CF-IDE daughterboard]] for MPU302|2|$12|Bill Shen|Assembled and tested, CF disk not included. | |
|[[:builderpages:plasmo:z280rc|Z280RC]], Z280 for RC2014|6|$50|Bill Shen|Assembled and tested, include CP2102 USB adapter and 128Meg CF loaded with software | | |[[:builderpages:plasmo:z280rc|Z280RC]], Z280 for RC2014|4|$50|Bill Shen|Assembled and tested, include CP2102 USB adapter and 128Meg CF loaded with software | |
| |MC14500 board|9|$5|Richard Edwards|1bit "CPU" board. | |
| |KIM Uno Board only|8|$5US|Michael Cvet.|Kim Uno Board using Arduino see [[http://obsolescence.wixsite.com/obsolescence/kim-uno-get-or-build-one|Tronixlabs ]](you can purchase kits from there also). I only have blank PC boards from an order I placed. Postage FREE to Aust. and US for 1 board. | |
| |SYM-1 Maxi Board|2|$20US|Michael Cvet.|SYM-1 Maxi board, serial clone of SYM-1 board. [[https://sites.google.com/site/gogleoops/sym-1-maxi|See Old Micros website]]. Postage FREE to Aust and US for 1 board. | |
| |
===== Chips/Components ===== | ===== Chips/Components ===== |
===== Order Contact Information ===== | ===== Order Contact Information ===== |
| |
^**Contact** ^**Email** ^**Locn** ^**Last Updated** | | ^**Contact** ^**Email** ^**Locn** ^**Last Updated** ^**Username** | |
|Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| | |Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| | |
|Rich Cini|rich.cini <at> gmail.com| |29 July 2014| | |Rich Cini|rich.cini <at> gmail.com| |29 July 2014| | |
|John Coffman USA|johninsd <at> gmail.com| |20 Apr 2018| | |John Coffman|johninsd <at> gmail <dot> com|USA|30 Nov 2018|jcoffman| |
|Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com| |18 Mar 2017| | |Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com| |18 Mar 2017| | |
|Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| | |Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| | |
|Sergey Kiselev|skiselev:gmail/com (replace ':' with '@' and '/' with '.')| |28 Jul 2015| | |Sergey Kiselev|skiselev:gmail/com (replace ':' with '@' and '/' with '.')| |28 Jul 2015| | |
|Ed Snider|zippster278 <at> gmail.com| |13 Mar 2018| | |Ed Snider|zippster278 <at> gmail.com| |13 Mar 2018| | |
|Will Sowerbutts|will <at> sowerbutts.com|UK|22 July 2017| | |Will Sowerbutts|will <at> sowerbutts.com|UK|22 July 2017| | |
|Wayne Warthen|wwarthen <at> gmail.com| |3 Sep 2015| | |Wayne Warthen|wwarthen <at> gmail.com| |3 Sep 2015| | |
|Neil Breeden|nbreeden <at> me.com| |23 May 2014| | |Neil Breeden|nbreeden <at> me.com| |23 May 2014| | |
|Wolfgang Kabatzke|dr.wolfgangkabatzke:online/de (replace ':' with '@' and '/' with '.')| |15 Jan 2014| | |Don Caprio|ilvunix <at> gmail.com| |05 Oct 2014| | |
|Don Caprio|ilvunix <at> gmail.com| |05 Oct 2014| | |Ewout Ros|ewout.ros <at> gmail.com| |19 Feb 2017| | |
|Ewout Ros|ewout.ros <at> gmail.com| |19 Feb 2017| | |Richard Edwards|ecb <at> trick-1 <dot> net|Aust.|5 Jul 2017| | |
|Richard Edwards|ecb <at> trick-1 <dot> net|Aust.|5 Jul 2017| | |Jordi Solís|jordi.solism <at> gmail <dot> com|Spain|20 Aug 2017| | |
|Jordi Solís|jordi.solism <at> gmail <dot> com|Spain|20 Ago 2017| | |Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017| | |
|Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017| | |Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017| | |
|Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017| | |Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aust.|23 Dec 2018|[[:builderpages:b1ackmai1er:start|b1ackmai1er]]| |
|Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aust.|10 Mar 2018| | |Doug Gabbard|doug <at> retrodepot <dot> net|USA|15 Jun 2018| | |
|Doug Gabbard|doug <at> retrodepot <dot> net|USA|29 Jan 2018| | |Rienk Koolstra|rkstar42 <at> gmail <dot> com|NL|13 Oct 2018| | |
| |Michael Cvetanovski|michael.cvet <at> gmail <dot> com|Aust|16 Nov 2018| | |
| |
| ===== ===== |
| |
\\ | \\ |
| |
| |