Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
boardinventory [2020/03/26 03:48]
craig [SBC-85]
boardinventory [2020/04/02 21:02]
craig [SBC-85] updated qty
Line 65: Line 65:
 |SBC CPU v1.1 Assembled|1|$55|USA|Craig Andrews| | |SBC CPU v1.1 Assembled|1|$55|USA|Craig Andrews| |
 |**BARE BOARDS** | | | | | | |**BARE BOARDS** | | | | | |
-|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cpu-v1-1-1-2-documentation/​|SBC CPU v1.2 -Tin Fingers]]|5|$2.50|USA|Craig Andrews| | +|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cpu-v1-1-1-2-documentation/​|SBC CPU v1.2 -Tin Fingers]]|2|$2.50|USA|Craig Andrews| | 
-|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cpu-v1-1-1-2-documentation/​|SBC CPU v1.2 - Gold Fingers]]|10|$5|USA|Craig Andrews| | +|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cpu-v1-1-1-2-documentation/​|SBC CPU v1.2 - Gold Fingers]]|5|$5|USA|Craig Andrews| | 
-|[[http://​sbc-85.com/​index.php/​documentation/​backplane-4-documentation/​|Backplane-4 v1.0]]|10|$2.50|USA|Craig Andrews| | +|[[http://​sbc-85.com/​index.php/​documentation/​backplane-4-documentation/​|Backplane-4 v1.0]]|5|$2.50|USA|Craig Andrews| | 
-|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cassette-tape-interface-documentation/​|Cassette Interface v1.0]]|4|$2.50|USA|Craig Andrews| | +|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cassette-tape-interface-documentation/​|Cassette Interface v1.0]]|2|$2.50|USA|Craig Andrews| | 
-|[[http://​sbc-85.com/​index.php/​documentation/​bus-monitor-supreme-documentation/​|Bus Monitor Supreme v1.1]]|0|$5|USA|Craig Andrews| | +|[[http://​sbc-85.com/​index.php/​documentation/​bus-monitor-supreme-documentation/​|Bus Monitor Supreme v1.1b]]|4|$5|USA|Craig Andrews|May contain undiscovered bugs so it is still considered to be a prototype
-|Protoboard v1.0|4|$2.50|USA|Craig Andrews| |+|Protoboard v1.0|2|$2.50|USA|Craig Andrews| |
  
 \\ \\
Line 90: Line 90:
 |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003A]]| ​ 4  |  $10 USD  |Phil Summers| ​  \\ Includes the Kontron reset correction.| |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003A]]| ​ 4  |  $10 USD  |Phil Summers| ​  \\ Includes the Kontron reset correction.|
 |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003]] ​ |  2  |  $15  |Jordi Solis  |   | |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003]] ​ |  2  |  $15  |Jordi Solis  |   |
-|[[:​boards:​sbc:​sbc-188:​start|SBC-188 v3]]  |  ​ ​| ​ $25  |John Coffman ​ |4-layer 25mhz respin of the SBC-188 ups memory to 1Mb & adds PPIDE connector. This board is hosted at "​PCBway.com",​ and those outside of the USA are encouraged to order & host the board in their locale. ​ |+|[[:​boards:​sbc:​sbc-188:​start|SBC-188 v3]]  |  ​ ​| ​ $25  |John Coffman ​ |4-layer 25mhz respin of the SBC-188 ups memory to 1Mb & adds PPIDE connector. This board is hosted at "​PCBway.com",​ and those outside of the USA are encouraged to order & host the board in their locale. ​ |
 |  4MEM  |   ​| ​  ​| ​  ​| ​  | |  4MEM  |   ​| ​  ​| ​  ​| ​  |
 |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  4  |  $15  |Ewout Ros  |   | |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  4  |  $15  |Ewout Ros  |   |
Line 115: Line 115:
 |[[:​boards:​ecb:​mini-68k:​start|ECB Mini-68K]] ​ |  26  |  $20  |Rich Cini  |v2.0-007; requires MF/PIC board to operate. ​ | |[[:​boards:​ecb:​mini-68k:​start|ECB Mini-68K]] ​ |  26  |  $20  |Rich Cini  |v2.0-007; requires MF/PIC board to operate. ​ |
 |[[:​boards:​ecb:​cvdu:​start|ColorVDU V2]]  |  8  |  $20  |Wayne Warthen ​ |   | |[[:​boards:​ecb:​cvdu:​start|ColorVDU V2]]  |  8  |  $20  |Wayne Warthen ​ |   |
-|[[:​boards:​ecb:​vga3:​vga3|ECB VGA3]] ​ |  ​10  ​| ​ $25  |John Coffman ​ |4-layer ​board. ​ |+|[[:​boards:​ecb:​vga3:​vga3|ECB VGA3]] ​ |  ​ ​| ​ $25  |John Coffman ​ |4-layer ​board. ​ |
 |[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]] ​ |  20  |  $20  |Todd Goodman ​ |   | |[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]] ​ |  20  |  $20  |Todd Goodman ​ |   |
 |[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]] ​ |  12  |  $20  |John Coffman ​ |   | |[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]] ​ |  12  |  $20  |John Coffman ​ |   |
Line 128: Line 128:
 |[[:​boards:​sbc:​65c816_ecb_sbc:​65c816_ecb_sbc|ECB 65c816 SBC]]  |  15  |  $20  |Dan Werner ​ |note the logic family on the board – U6 must be HCT!  | |[[:​boards:​sbc:​65c816_ecb_sbc:​65c816_ecb_sbc|ECB 65c816 SBC]]  |  15  |  $20  |Dan Werner ​ |note the logic family on the board – U6 must be HCT!  |
 |[[:​boards:​ecb:​bus-extender:​start|ECB Bus Extender]] ​ |  4  |  $15  |Richard Edwards ​ |note - extender board has row A and C. Row B is not part of the design although ribbon cable can be used to bring row B through. (AUS)  | |[[:​boards:​ecb:​bus-extender:​start|ECB Bus Extender]] ​ |  4  |  $15  |Richard Edwards ​ |note - extender board has row A and C. Row B is not part of the design although ribbon cable can be used to bring row B through. (AUS)  |
 +
 +\\
 +
 +
 +===== S-100 Bus Boards =====
 +
 +^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes|
 +|Regular Prototyping Board| ​  ​| ​ $20  |   ​| ​  |
 +|Buffered Prototyping Board v3.0a| ​ 20  |  $20  |Todd Goodman ​ |   |
 +| |  4  |  $20  |Jordi Solis  |   |
 +|Buffered Prototyping Board Mini Sea of PTH'​s| ​ 30  |  $25  |Josh Bensadon (in Canada), Todd Goodman (elsewhere)| ​  |
 +|Backplane (9 slot, terminated) - V4|  20  |  $15  |Todd Goodman| ​  |
 +|Backplane (Antony'​s 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman| ​  |
 +|Dual IDE - Version 03a|  20  |  $20  |Todd Goodman ​ |   |
 +|Parallel ASCII Keyboard| ​  ​| ​ $20  |   ​| ​  |
 +|4MB SRAM|  0  |  $20  | |   |
 +|System Monitor Board - V3|  40  |  $20  |Todd Goodman| ​  |
 +|——TIL311 Display Board for SMB|  20  |  $6  |Todd Goodman| ​  |
 +|——LED Bar Display Board for SMB|  20  |  $10  |Todd Goodman| ​  |
 +|——HP5082 Display Board for SMB|  20  |  $10  |Todd Goodman| ​  |
 +|Bus Extender - V2|  20  |  $20  |Todd Goodman| ​  |
 +|RAM & ROM - v2.0b| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Serial I/O v3.1|  20  |  $20  |Todd Goodman ​ |   |
 +|PIC/​RTC| ​  ​| ​ $20  |   ​| ​  |
 +|IMSAI MPU-A CPU Board (8080A) reproduction of original| ​ 20  |  $30  |Gary Kaufman| |
 +|Propeller Based Console I/O - v2.51| ​ 20  |  $20  |Todd Goodman ​ |   |
 +|Altair 8800 CPU Board (8080A) reproduction of original| ​ 30  |  $30  |Gary Kaufman| ​  |
 +|68000/​68010 CPU board v1.03b| ​ 20  |  $20  |Todd Goodman ​ |   |
 +|8086 Master/​Slave CPU Board| ​ 20  |  $20  |Gary Kaufman| ​  |
 +|6502 CPU board| ​ 20  |  $20  |Todd Goodman| ​  |
 +|16MB SRAM - v6.0a| ​ 20  |  $20  |Todd Goodman| ​  |
 +|—- Mezzanine Board for SRAM - V06d|  60  |  $3  |Todd Goodman| ​  |
 +|16MB SRAM - V1|  60  |  $15  |Todd Goodman| ​  |
 +|—-Mezzanine board for SRAM - V06C|  3  |  $1  |Todd Goodman| ​  |
 +|Parallel I/O Board V2|  20  |  $20  |Todd Goodman| ​  |
 +|Bus Terminator| ​ 20  |  $20  |Todd Goodman| ​  |
 +|S-100 PC-AT Ver 02 (DOS Support Board)| ​ 0  |  $15  |Neil Breeden| ​  |
 +|S-100 Front Panel (aka FP Mini)| ​ 4  |  $20  |Don Caprio| ​  |
 +|Front Panel - Full Size (reproduction of a popular classic)| ​ 2  |  ??  |Don Caprio|Looking for Beta tester|
 +|S-100 Bus Breakout Board| ​ 75  |  $5  |Don Caprio|Board In production|
 +|S-100 OPL3 V1|  20  |  $17  |Todd Goodman| ​  |
 +|S-100 V2 MSX2 UTILITY Board| ​ 9  |  15 €  |Jordi Solis|Looking for Beta tester ​ |
 +|Z-80 SBC v1.1a| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Z-80 Master v2.01| ​ 20  |  $20  |Todd Goodman| ​  |
 +|ZFDC v1.0b| ​ 20  |  $20  |Todd Goodman| ​  |
 +|8088 Master v2 (Marked "​Version 01" on silkscreen)| ​ 20  |  $20  |Todd Goodman| ​  |
 +|80286 v2|  20  |  $20  |Todd Goodman| ​  |
 +|80386 v2.31| ​ 20  |  $20  |Todd Goodman| ​  |
 +|32/64MB OTT RAM v3.11b| ​ 20  |  $26  |Todd Goodman| ​  |
 +|PDP11 CPU v2|  20  |  $20  |Todd Goodman| ​  |
 +|PDP11 Support v1.01| ​ 20  |  $20  |Todd Goodman| ​  |
 +|MSDOS Support v3a|  20  |  $20  |Todd Goodman| ​  |
 +|16-bit VGA v15a|  20  |  $20  |Todd Goodman| ​  |
 +|8-bit VGA v11|  20  |  $20  |Todd Goodman| ​  |
 +|Trident Adapter v15a|  20  |  $5  |Todd Goodman| ​  |
 +|Full Size 80486 v15a|  20  |  $36  |Todd Goodman| ​  |
 +|CCS-2422E| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Bus Display| ​ 60  |  $20  |Todd Goodman| ​  |
 +|FPGA v2|  20  |  $32  |Todd Goodman| ​  |
 +|– FPGA Shield #0|  20  |  $8  |Todd Goodman| ​  |
 +|– FPGA Shield #1|  20  |  $8  |Todd Goodman| ​  |
 +|68030 v1.1|  20  |  $20  |Todd Goodman| ​  |
 +|Z-80 FPGA v1.1B| ​ 20  |  $20  |Todd Goodman| ​  |
 +
 +===== ISA Bus Boards =====
 +
 +==== Xi 8088 Project (Sergey Kiselev) ====
 +
 +^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  |
 +|Xi 8088 PCB|20|$25|Todd Goodman| ​  |
 +|ISA Backplane PCB|40|$25|Todd Goodman| ​  |
 +|ISA SVGA v1.1 PCB|40|$10|Todd Goodman| ​  |
 +|XT-CF-Lite PCB|30|$12|Todd Goodman| ​  |
 +|ISA OPL2 PCB|40|$10|Todd Goodman| ​  |
 +|ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  |
 +|Micro 8088 PCB|0|$20|Sergey Kiselev| ​  |
 +|ISA 8-Bit Backplane PCB|0|$10|Sergey Kiselev| ​  |
 +
 +===== Other (formerly known as "​Mini"​) Boards =====
 +
 +^  **Board / Component** ​   ^  **Stock** ​   ^  **Price** ​   ^  **Order Contact** ​   ^  **Notes** ​   |
 +|[[:​boards:​other:​ppide|PPIDE]]| ​  | |   ​| ​  |
 +|PPISD|20|$5|Todd Goodman| ​  |
 +|AT2XTKBD|20|$5|Todd Goodman| |
 +|ECB to Z80 Socket Adapters| ​  ​|$5| ​  ​| ​  |
 +|Juha SD|   ​|$5| ​  ​| ​  |
 +|SCSI2IDEv2|40|$10|Todd Goodman| ​  |
 +|XT-IDE (ISA Bus)|0|$12|Todd Goodman|Not sure about reordering, new version created by someone on VCF  |
 +|XT-FDC|40|$12|Todd Goodman| ​  |
 +|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​37113829/​index.htm|MSX EPROM Cartridge]]| ​  ​|$5| ​  ​| ​  |
 +|Zeta/​Z80-2-ECB Prototypes|2|$12|Andrew Bingham| ​  |
 +|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​38282303/​95749082/​index.htm|Elm GAL Programmer]]| ​ 2 \\   \\ 8|  5 € \\   \\ 5|  Jordi Solis \\   \\ Phillip Summers| ​ [[http://​elm-chan.org/​works/​pgal/​report_e.html|http://​elm-chan.org/​works/​pgal/​report_e.html]] ​ \\   ​\\ ​ [[http://​www.retrotechnology.com/​herbs_stuff/​gal.html|http://​www.retrotechnology.com/​herbs_stuff/​gal.html]] \\   ​\\ ​ [[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf|https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf]] ​ |
 +|CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board  |
 +|[[:​boards:​other:​idecf2din:​start|CF-IDE daughterboard]] for MPU302|2|$12|Bill Shen|Assembled and tested, CF disk not included. ​ |
 +|[[:​builderpages:​plasmo:​z280rc|Z280RC]],​ Z280 for RC2014|4|$50|Bill Shen|Assembled and tested, include CP2102 USB adapter and 128Meg CF loaded with software ​ |
 +|MC14500 board|7|$5|Richard Edwards|1bit "​CPU"​ board. ​ |
 +|KIM Uno Board only|8|$5US|Michael Cvet.|Kim Uno Board using Arduino see [[http://​obsolescence.wixsite.com/​obsolescence/​kim-uno-get-or-build-one|Tronixlabs ]](you can purchase kits from there also). I only have blank PC boards from an order I placed. Postage FREE to Aust. and US for 1 board. ​ |
 +|SYM-1 Maxi Board|2|$20US|Michael Cvet.|SYM-1 Maxi board, serial clone of SYM-1 board. [[https://​sites.google.com/​site/​gogleoops/​sym-1-maxi|See Old Micros website]]. Postage FREE to Aust and US for 1 board. ​ |
 +|[[https://​hackaday.io/​Just4Fun|uTerm-S]]|4|5AUD|Phil Summers|Just4Fun'​s VT100 VGA Serial terminal ​ |
 +|[[https://​velesoft.speccy.cz/​data-gear.htm|Datagear DMA board]]|4|$3US|Phil Summers|Datagear DMA piggy back board. ​ |
 +
 +===== Chips/​Components =====
 +
 +^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  |
 +|80C188-25 CPU|0|$4|Todd Goodman| ​  |
 +|WD37C65 FDC|   ​|$8| ​  ​| ​  |
 +|NS32202|134|Free with MF/​PIC| ​ Rich Cini or John Coffman| ​  |
 +
 +===== S-100 Bus Boards =====
 +
 +^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes|
 +|Regular Prototyping Board| ​  ​| ​ $20  |   ​| ​  |
 +|Buffered Prototyping Board v3.0a| ​ 20  |  $20  |Todd Goodman ​ |   |
 +| |  4  |  $20  |Jordi Solis  |   |
 +|Buffered Prototyping Board Mini Sea of PTH'​s| ​ 30  |  $25  |Josh Bensadon (in Canada), Todd Goodman (elsewhere)| ​  |
 +|Backplane (9 slot, terminated) - V4|  20  |  $15  |Todd Goodman| ​  |
 +|Backplane (Antony'​s 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman| ​  |
 +|Dual IDE - Version 03a|  20  |  $20  |Todd Goodman ​ |   |
 +|Parallel ASCII Keyboard| ​  ​| ​ $20  |   ​| ​  |
 +|4MB SRAM|  0  |  $20  | |   |
 +|System Monitor Board - V3|  40  |  $20  |Todd Goodman| ​  |
 +|——TIL311 Display Board for SMB|  20  |  $6  |Todd Goodman| ​  |
 +|——LED Bar Display Board for SMB|  20  |  $10  |Todd Goodman| ​  |
 +|——HP5082 Display Board for SMB|  20  |  $10  |Todd Goodman| ​  |
 +|Bus Extender - V2|  20  |  $20  |Todd Goodman| ​  |
 +|RAM & ROM - v2.0b| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Serial I/O v3.1|  20  |  $20  |Todd Goodman ​ |   |
 +|PIC/​RTC| ​  ​| ​ $20  |   ​| ​  |
 +|IMSAI MPU-A CPU Board (8080A) reproduction of original| ​ 20  |  $30  |Gary Kaufman| |
 +|Propeller Based Console I/O - v2.51| ​ 20  |  $20  |Todd Goodman ​ |   |
 +|Altair 8800 CPU Board (8080A) reproduction of original| ​ 30  |  $30  |Gary Kaufman| ​  |
 +|68000/​68010 CPU board v1.03b| ​ 20  |  $20  |Todd Goodman ​ |   |
 +|8086 Master/​Slave CPU Board| ​ 20  |  $20  |Gary Kaufman| ​  |
 +|6502 CPU board| ​ 20  |  $20  |Todd Goodman| ​  |
 +|16MB SRAM - v6.0a| ​ 20  |  $20  |Todd Goodman| ​  |
 +|—- Mezzanine Board for SRAM - V06d|  60  |  $3  |Todd Goodman| ​  |
 +|16MB SRAM - V1|  60  |  $15  |Todd Goodman| ​  |
 +|—-Mezzanine board for SRAM - V06C|  3  |  $1  |Todd Goodman| ​  |
 +|Parallel I/O Board V2|  20  |  $20  |Todd Goodman| ​  |
 +|Bus Terminator| ​ 20  |  $20  |Todd Goodman| ​  |
 +|S-100 PC-AT Ver 02 (DOS Support Board)| ​ 0  |  $15  |Neil Breeden| ​  |
 +|S-100 Front Panel (aka FP Mini)| ​ 4  |  $20  |Don Caprio| ​  |
 +|Front Panel - Full Size (reproduction of a popular classic)| ​ 2  |  ??  |Don Caprio|Looking for Beta tester|
 +|S-100 Bus Breakout Board| ​ 75  |  $5  |Don Caprio|Board In production|
 +|S-100 OPL3 V1|  20  |  $17  |Todd Goodman| ​  |
 +|S-100 V2 MSX2 UTILITY Board| ​ 9  |  15 €  |Jordi Solis|Looking for Beta tester ​ |
 +|Z-80 SBC v1.1a| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Z-80 Master v2.01| ​ 20  |  $20  |Todd Goodman| ​  |
 +|ZFDC v1.0b| ​ 20  |  $20  |Todd Goodman| ​  |
 +|8088 Master v2 (Marked "​Version 01" on silkscreen)| ​ 20  |  $20  |Todd Goodman| ​  |
 +|80286 v2|  20  |  $20  |Todd Goodman| ​  |
 +|80386 v2.31| ​ 20  |  $20  |Todd Goodman| ​  |
 +|32/64MB OTT RAM v3.11b| ​ 20  |  $26  |Todd Goodman| ​  |
 +|PDP11 CPU v2|  20  |  $20  |Todd Goodman| ​  |
 +|PDP11 Support v1.01| ​ 20  |  $20  |Todd Goodman| ​  |
 +|MSDOS Support v3a|  20  |  $20  |Todd Goodman| ​  |
 +|16-bit VGA v15a|  20  |  $20  |Todd Goodman| ​  |
 +|8-bit VGA v11|  20  |  $20  |Todd Goodman| ​  |
 +|Trident Adapter v15a|  20  |  $5  |Todd Goodman| ​  |
 +|Full Size 80486 v15a|  20  |  $36  |Todd Goodman| ​  |
 +|CCS-2422E| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Bus Display| ​ 60  |  $20  |Todd Goodman| ​  |
 +|FPGA v2|  20  |  $32  |Todd Goodman| ​  |
 +|– FPGA Shield #0|  20  |  $8  |Todd Goodman| ​  |
 +|– FPGA Shield #1|  20  |  $8  |Todd Goodman| ​  |
 +|68030 v1.1|  20  |  $20  |Todd Goodman| ​  |
 +|Z-80 FPGA v1.1B| ​ 20  |  $20  |Todd Goodman| ​  |
 +
 +===== ISA Bus Boards =====
 +
 +==== Xi 8088 Project (Sergey Kiselev) ====
 +
 +^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  |
 +|Xi 8088 PCB|20|$25|Todd Goodman| ​  |
 +|ISA Backplane PCB|40|$25|Todd Goodman| ​  |
 +|ISA SVGA v1.1 PCB|40|$10|Todd Goodman| ​  |
 +|XT-CF-Lite PCB|30|$12|Todd Goodman| ​  |
 +|ISA OPL2 PCB|40|$10|Todd Goodman| ​  |
 +|ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  |
 +|Micro 8088 PCB|0|$20|Sergey Kiselev| ​  |
 +|ISA 8-Bit Backplane PCB|0|$10|Sergey Kiselev| ​  |
 +
 +===== Other (formerly known as "​Mini"​) Boards =====
 +
 +^  **Board / Component** ​   ^  **Stock** ​   ^  **Price** ​   ^  **Order Contact** ​   ^  **Notes** ​   |
 +|[[:​boards:​other:​ppide|PPIDE]]| ​  | |   ​| ​  |
 +|PPISD|20|$5|Todd Goodman| ​  |
 +|AT2XTKBD|20|$5|Todd Goodman| |
 +|ECB to Z80 Socket Adapters| ​  ​|$5| ​  ​| ​  |
 +|Juha SD|   ​|$5| ​  ​| ​  |
 +|SCSI2IDEv2|40|$10|Todd Goodman| ​  |
 +|XT-IDE (ISA Bus)|0|$12|Todd Goodman|Not sure about reordering, new version created by someone on VCF  |
 +|XT-FDC|40|$12|Todd Goodman| ​  |
 +|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​37113829/​index.htm|MSX EPROM Cartridge]]| ​  ​|$5| ​  ​| ​  |
 +|Zeta/​Z80-2-ECB Prototypes|2|$12|Andrew Bingham| ​  |
 +|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​38282303/​95749082/​index.htm|Elm GAL Programmer]]| ​ 2 \\   \\ 8|  5 € \\   \\ 5|  Jordi Solis \\   \\ Phillip Summers| ​ [[http://​elm-chan.org/​works/​pgal/​report_e.html|http://​elm-chan.org/​works/​pgal/​report_e.html]] ​ \\   ​\\ ​ [[http://​www.retrotechnology.com/​herbs_stuff/​gal.html|http://​www.retrotechnology.com/​herbs_stuff/​gal.html]] \\   ​\\ ​ [[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf|https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf]] ​ |
 +|CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board  |
 +|[[:​boards:​other:​idecf2din:​start|CF-IDE daughterboard]] for MPU302|2|$12|Bill Shen|Assembled and tested, CF disk not included. ​ |
 +|[[:​builderpages:​plasmo:​z280rc|Z280RC]],​ Z280 for RC2014|4|$50|Bill Shen|Assembled and tested, include CP2102 USB adapter and 128Meg CF loaded with software ​ |
 +|MC14500 board|7|$5|Richard Edwards|1bit "​CPU"​ board. ​ |
 +|KIM Uno Board only|8|$5US|Michael Cvet.|Kim Uno Board using Arduino see [[http://​obsolescence.wixsite.com/​obsolescence/​kim-uno-get-or-build-one|Tronixlabs ]](you can purchase kits from there also). I only have blank PC boards from an order I placed. Postage FREE to Aust. and US for 1 board. ​ |
 +|SYM-1 Maxi Board|2|$20US|Michael Cvet.|SYM-1 Maxi board, serial clone of SYM-1 board. [[https://​sites.google.com/​site/​gogleoops/​sym-1-maxi|See Old Micros website]]. Postage FREE to Aust and US for 1 board. ​ |
 +|[[https://​hackaday.io/​Just4Fun|uTerm-S]]|4|5AUD|Phil Summers|Just4Fun'​s VT100 VGA Serial terminal ​ |
 +|[[https://​velesoft.speccy.cz/​data-gear.htm|Datagear DMA board]]|4|$3US|Phil Summers|Datagear DMA piggy back board. ​ |
 +
 +===== Chips/​Components =====
 +
 +^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  |
 +|80C188-25 CPU|0|$4|Todd Goodman| ​  |
 +|WD37C65 FDC|   ​|$8| ​  ​| ​  |
 +|NS32202|134|Free with MF/​PIC| ​ Rich Cini or John Coffman| ​  |
  
 ===== S-100 Bus Boards ===== ===== S-100 Bus Boards =====
Line 342: Line 553:
 |Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| | |Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| |
 |Rich Cini|rich.cini <at> gmail.com| |29 July 2014| | |Rich Cini|rich.cini <at> gmail.com| |29 July 2014| |
-|John Coffman|johninsd <at> gmail <dot> com|USA|07 Feb 2020|jcoffman|+|John Coffman|johninsd <at> gmail <dot> com|USA|31 Mar 2020|jcoffman|
 |Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com| |18 Mar 2017| | |Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com| |18 Mar 2017| |
 |Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| | |Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| |
boardinventory.txt · Last modified: 2020/05/26 15:14 by craig
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0