Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
boardinventory [2018/08/03 22:09]
b1ackmai1er [EuroCard Bus (ECB) Boards]
boardinventory [2018/12/11 09:35] (current)
b1ackmai1er [EuroCard ​Bus (ECB) Boards]
Line 18: Line 18:
  
 ^Board / Component^Stock^Price^Order Contact^Notes| ^Board / Component^Stock^Price^Order Contact^Notes|
-|[[:​boards:​sbc:​minimax8085:​start|MiniMax8085]][[:​boards:​sbc:​minimax8085:​start| PCB]]| ​ 12 \\   \\ 7|  $5|   \\ Sergey Kiselev ​\\   ​\\ Phillip Summers| ​  | +|[[:​boards:​sbc:​minimax8085:​start|MiniMax8085]][[:​boards:​sbc:​minimax8085:​start| PCB]]| ​ 12  |  $5  |Sergey Kiselev ​ ​| ​  ​
-|[[:​builderpages:​rhkoolstar:​sbc-2g-512|]]|6|$5|Phillip Summers|Rienk ​Koolstar's Z80 SBC based on Grant Searle'​s 9 chip breadboard design. ​ |+|   ​| ​ 5  |$5 USD  |Phillip Summers ​ |   | 
 +|[[:​builderpages:​rhkoolstar:​sbc-2g-512|]] ​  ​2  ​ $5 USD  ​|Phillip Summers|Rienk ​Koolstra's Z80 SBC inspired by Grant Searle'​s 9 chip breadboard design.  ​
 +|   ​| ​ 4  |  $5  |Rienk Koolstra ​ |price includes shipping ​ | 
 +|   ​| ​  ​| ​  ​| ​  ​| ​  |
  
 \\ \\
Line 27: Line 30:
  
 ^**Board** ^**Stock** ^**Price** ^**Order Contact** ^**Notes** | ^**Board** ^**Stock** ^**Price** ^**Order Contact** ^**Notes** |
-|[[:​boards:​sbc:​mpu302|MPU302]]|1|$100|Bill Shen|Pre-programmed and tested with CP/M 68K ver 1.3. Board ready to run.|+|[[:​boards:​sbc:​mpu302|MPU302]]|1|$50|Bill Shen|Pre-programmed and tested with CP/M 68K ver 1.3. Board ready to run.|
  
 ==== Tiny68K, Rev2, 68000 SBC, 16 Meg Memory, CP/M 68K Ready ==== ==== Tiny68K, Rev2, 68000 SBC, 16 Meg Memory, CP/M 68K Ready ====
Line 34: Line 37:
 |[[:​boards:​sbc:​tiny68k:​tiny68k_rev2|Tiny68K]],​ rev2|1|$50|Bill Shen|Assembled and tested with CP/M 68K ver 1.3. A Compact Flash card included| |[[:​boards:​sbc:​tiny68k:​tiny68k_rev2|Tiny68K]],​ rev2|1|$50|Bill Shen|Assembled and tested with CP/M 68K ver 1.3. A Compact Flash card included|
 |Tiny68k_r2 Kit|0|$30|Bill Shen|PC board with all SMT components soldered, remaining DIP components and sockets in kit form, CF card not included| |Tiny68k_r2 Kit|0|$30|Bill Shen|PC board with all SMT components soldered, remaining DIP components and sockets in kit form, CF card not included|
-|Tiny68k_r2 PCB|7|$5|Phillip Summers|Silver plated edge connectors only.| +|Tiny68k_r2 PCB|7|5 ​USD|Phillip Summers|Silver plated edge connectors only.|
- +
-\\ +
  
 ==== Multicomp ==== ==== Multicomp ====
  
 ^Board^Stock^Price Currency^Order Contact^Notes| ^Board^Stock^Price Currency^Order Contact^Notes|
-|[[:​boards:​sbc:​multicomp:​cycloneii-c:​start|Multicomp IIc]]|5|$5 USA|Phillip Summers|v1.10 boards|+|[[:​boards:​sbc:​multicomp:​cycloneii-c:​start|Multicomp IIc]]   ​3  ​ $5 USA  |Phillip Summers ​ |v1.10 boards ​ | 
 +|[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cycloneiv.jpg|Muliticomp IV]]  |  1  |  $5  |Rienk Koolstra ​ |price includes shipping – see [[:​builderpages:​rhkoolstar:​start|main page]]  ​|
  
-\\+==== AVR Based board ====
  
 +^Board^Stock^Price Currency^Order Contact^Notes|
 +|[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cpmega88.jpg|CP/​Mega88]] ​ |  13  |  $2  |Rienk Koolstra ​ |AVR implementation of Takashi Toyoshima'​s CP/Mega88 in SMD \\ price includes shipping - see [[:​builderpages:​rhkoolstar:​start|main page]] ​ |
  
-===== EuroCard Bus (ECB) Boards =====+===== EuroCard ​Bus (ECB) Boards =====
  
-^Board / Component ​  Stock   Price Currency ​ ^Order Contact ​ ^Notes ​ +^Board / Component^Stock^Price Currency^Order Contact^Notes| 
-|[[:​boards:​ecb:​cassette_intf:​start|Cassette Interface]]| ​  ​| ​ $20  |   ​  ​+|[[:​boards:​ecb:​cassette_intf:​start|Cassette Interface]]| ​  ​| ​ $20  | | | 
-|[[:​boards:​ecb:​diskio-v3:​start|Disk I/O V3]]|   \\ 20 \\   \\ 8  ​| ​  \\ $10 \\   \\ 10 USA  ​| ​  \\ Todd Goodman ​\\   ​\\ Phil Summers| ​  ​+|[[:​boards:​ecb:​diskio-v3:​start|Disk I/O V3]]   20  |  $10  |Todd Goodman ​ ​| ​  ​
-|[[:​boards:​ecb:​propio:​start|Prop I/O V2]]|  20 \\   \\ 2  ​| ​ $20  |Wayne Warthen ​\\ Jordi Solís| ​  ​+| |  7  |  10 USD  |Phil Summers| | 
-|[[:​boards:​ecb:​backplane-8:​start|ECB Backplane (8 slot)]]| ​ 11 \\ 32  ​|  ​$20 USA  |John Coffman ​\\ Rich Cini|167mm version ​\\ co-stocked for mini-68k| +|[[:​boards:​ecb:​propio:​start|Prop I/O V2]]|  20  |  $20  |Wayne Warthen| | 
-|[[:​boards:​ecb:​backplane-3:​start|ECB Mini Backplane (3 slot)]]| ​ 3  |  ​$5  |Phil Summers|(Will Sowerbutts ​also accumulating orders – will order another batch soon.)+| |  1  |  12 €  |Jordi Solís| | 
-|[[:​builderpages:​b1ackmai1er:​backplane-4|ECB Mini Backplane (4 slot 10x10)]]|  ​ ​| ​ $5 USA  |Phil Summers ​   ​+|[[:​boards:​ecb:​backplane-8:​start|ECB Backplane (8 slot)]]| ​ 11  |  20 USD  |John Coffman|167mm version, 1/8" thickness| 
-|[[:​boards:​sbc:​sbc_v2:​start|SBC V2]]|  ​ ​|  ​$10 USA  |Phil Summers ​ |   | +|   ​| ​ 32  |   |Rich Cini  |co-stocked for mini-68k ​ 
-|[[:​boards:​sbc:​sbc-188:​start|SBC-188]]| ​ 0  |  $20  |Todd Goodman| ​  | +|[[:​boards:​ecb:​backplane-3:​start|ECB Mini Backplane (3 slot)]]| ​ 3  |  5 USD  |Phil Summers| ​
-|4MEM| ​  ​| ​ $20  |   ​| ​  | +| |  50  |  $5  |Will Sowerbutts|New stock November 2018: 1.6mm, HASL lead solder finish.| 
-|[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping Board III]]| ​ 4 \\ 17  ​| ​ $15  |Ewout Ros \\ John Coffman|A new production run has arrived ​ | +|[[:​builderpages:​b1ackmai1er:​backplane-4|ECB Mini Backplane (4 slot 10×10)]]|  ​ ​| ​ $5  |Phil Summers| | 
-|[[:​boards:​ecb:​zilog-peripherals:​start|Zilog Peripherals]]| ​|  ​$10 USA  |Phil Summers ​ |Beta boards - looking for testers.  ​+|[[:​boards:​sbc:​sbc_v2:​start|SBC V2]]|  ​ ​| ​ 10 USD  |Phil Summers| | 
-|[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v02 (SCGS)]]| ​ 1  |  ​$20  ​|Jordi Solís ​ |   | +|   ​| ​ 5  |  12 €  |Jordi Solis  ​| ​  | 
-|[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v03 (SCGS)]]| ​ 4  |  ​$10 USA  |Phil Summers ​ |Beta boards - looking for testers.  ​+|[[:​boards:​sbc:​sbc-188:​start|SBC-188]] ​ |  0  |  $20  |Todd Goodman ​ |   | 
-|[[:​boards:​ecb:​bus-monitor:​start|ECB Bus Monitor]]| ​ 20  |  $20  |Todd Goodman| ​  | +|4MEM  |   ​| ​ $20  |   ​| ​  | 
-|MSX Cartridge reader| ​  ​| ​ $20  |   ​| ​  | +|[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  4  |  $15  |Ewout Ros  ​| ​  | 
-|[[:​boards:​ecb:​dsky:​start|DSKY V2]]|   ​| ​ $20  |   ​| ​  | +|[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  16  |  $15  |John Coffman  ​|   
-|VDU|   ​| ​ $20  |   ​| ​  | +|[[:​boards:​ecb:​zilog-peripherals:​start|Zilog Peripherals]] ​  ​4 ​ ​|  ​10 USD  |Phil Summers ​ |   ​
-|[[:​boards:​ecb:​ramfloppy:​start|ECB RAM-Floppy R13]]| ​ 0  |  $24  |Wolfgang Kabatzke|R13 with GAL currently in development. Design is finished, but no production and test| +|[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v02 (SCGS)]] ​ |  1  |  ​12 €  ​|Jordi Solís ​ |   | 
-|[[:boards:​ecb:​ramfloppy:​start|ECB RAM-Floppy R11]]|  ​ ​|  ​$10  |Phil Summers| | +|[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v03 (SCGS)]] ​ |  4  |  ​10 USD  |Phil Summers ​ |   ​
-|[[:​boards:​ecb:​4pio:​start|ECB 4PIO R03]]|  ​ ​|  ​$24  |Wolfgang Kabatzke|R03 is redesign of R02 with jumpers, no DIP-switches,​ and optimized Look-ahead-carry-logic,​ not tested yet| +|[[:​boards:​ecb:​bus-monitor:​start|ECB Bus Monitor]] ​ |  20  |  $20  |Todd Goodman ​ |   | 
-|[[:​boards:​ecb:​4pio:​start|ECB 4PIO R03]] 4  |  $10 USA  |Phil Summers| ​+|MSX Cartridge reader ​ |   ​| ​ $20  |   ​| ​  | 
-|[[:​boards:​ecb:​modprn:​start|ECB ModPrn R03]]|  0  ​| ​ ​$24  ​|Wolfgang Kabatzke|R02 actual in test, R03 is redesign of R02 with jumpers, no DIP-switches and error correction ( 5V and GND on 74LS27) and SUB-D9 male connectors like PC+|[[:​boards:​ecb:​dsky:​start|DSKY V2]]  |   ​| ​ $20  |   ​| ​  | 
-|[[:​boards:​ecb:​mf-pic:​start|ECB MF/PIC (68K Multifunction)]]| ​ 29  |  $20  |Rich Cini|v3.1-008 (20) and v3.1-007 (9). Includes National Semiconductor PIC chip with purchase.| +|VDU  |   ​| ​ $20  |   ​| ​  | 
-|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​35269969/​index.htm|ECB Dual IDE with FDC]]| ​ 8  |  $20  |Rich Cini|v2.0-006| +|[[:​boards:​ecb:​ramfloppy:​start:​r12|ECB RAM-Floppy R11]]  |  ​ ​| ​ 10 USD  |Phil Summers ​   ​
-|[[:​boards:​ecb:​adio:​start|ECB A/​D-I/​O]]| ​ 4  |  $20  |Rich Cini|v1.0-001| +|[[:​boards:​ecb:​4pio:​start|ECB 4PIO R03]]  |  ​ ​|  ​10 USD  |Phil Summers  ​|Note [[:​boards:​ecb:​4pio:​errata|Errata]] with the R03 board. ​ | 
-|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​35845601/​index.htm|uPD7220 V2]]|   ​| ​ $20  |   ​| ​  | +|[[:​boards:​ecb:​modprn:​start|ECB ModPrn R03]]  |   ​  ​  |   
-|[[:​boards:​ecb:​backplane-12:​start|ECB Extended Backplane (12 slot)]]|  ​ ​| ​ $25  ​|Jordi Solís ​ |   | +|[[:​boards:​ecb:​mf-pic:​start|ECB MF/PIC (68K Multifunction)]] ​ |  29  |  $20  |Rich Cini  |v3.1-008 (20) and v3.1-007 (9). Includes National Semiconductor PIC chip with purchase. ​ 
-|ECB Advanced Prototyping board| ​  ​| ​ $20  |   ​| ​  | +|[[http://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/35845334/48860720/​35269969/​index.htm|ECB Dual IDE with FDC]]  |  8  |  $20  |Rich Cini  |v2.0-006 ​ 
-|N8VEM Mini SBC v8|   ​| ​ $20  |   ​| ​  | +|[[:​boards:​ecb:​adio:​start|ECB A/​D-I/​O]] ​ |  4  |  $20  |Rich Cini  |v1.0-001 ​ 
-|[[:​boards:​ecb:​mini-68k:​start|ECB Mini-68K]]| ​ 28  |  $20  |Rich Cini|v2.0-007;​ requires MF/PIC board to operate.| +|[[http://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/35845334/​48860720/​35845601/​index.htm|uPD7220 V2]]  |   ​| ​ $20  |   ​| ​  | 
-|[[:​boards:​ecb:​cvdu:​start|ColorVDU V2]]|  14  |  $20  |Wayne Warthen| ​  | +|[[:​boards:​ecb:​backplane-12:​start|ECB Extended Backplane (12 slot)]] ​ |  ​ ​| ​ $22  ​|Jordi Solís ​ |   | 
-|[[:​boards:​ecb:​vga3:​vga3|ECB VGA3]]| ​ 18  |   \\ $25 USA  |John Coffman|4-layer board; let me know if you need pre-programmed GAL'​s.| +|ECB Advanced Prototyping ​board  |   ​| ​ $20  |   ​| ​  | 
-|[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]]| ​ 20  |  $20  |Todd Goodman| ​  | +|N8VEM Mini SBC v8  |   ​| ​ $20  |   ​| ​  | 
-|[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]]| ​ 12  |  $20 USA  |John Coffman| ​  | +|[[:​boards:​ecb:​mini-68k:​start|ECB Mini-68K]] ​ |  28  |  $20  |Rich Cini  |v2.0-007; requires MF/PIC board to operate. ​ 
-|[[:​boards:​sbc:​z180_mark_iv:​z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]]| ​ 0  |  $25 USA  |John Coffman|single board computer w/ IDE8 & SDcard+|[[:​boards:​ecb:​cvdu:​start|ColorVDU V2]]  |  14  |  $20  |Wayne Warthen ​ |   | 
-|[[:​boards:​ecb:​backplane-505-6508:​start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]]| ​ 0  |  $35  |John Coffman|contact me if you want the Gerber files to manufacture this board| +|[[:​boards:​ecb:​vga3:​vga3|ECB VGA3]] ​ |  18  |  $25  |John Coffman ​ |4-layer ​board; let me know if you need pre-programmed GAL'​s. ​ 
-|[[:​boards:​ecb:​kiss-68030:​start|ECB MC68030 CPU & memory (KISS030)]]| ​ 20  |  $25  |Rich Cini|v1.0-006;​ requires MF/PIC board| +|[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]] ​ |  20  |  $20  |Todd Goodman ​ |   | 
-|[[:​boards:​ecb:​4uart-usb|ECB 4UART-USB]]| ​ 13  |  $20 USA  |John Coffman| ​  | +|[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]] ​ |  12  |  $20  |John Coffman ​ |   | 
-|[[:​boards:​ecb:​usb-fifo:​start|ECB USB FIFO]]|  ​ ​| ​ $6  |Will Sowerbutts| | +|[[:​boards:​sbc:​z180_mark_iv:​z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]] ​ |  ​10  |  $15 USD  |Phil Summers ​ |   | 
-|[[:​boards:​sbc:​6x0x-atx-6u:​start|ECB 6x0x-ATX-6U]]| ​ 0  |  $20  |Andrew Bingham|May do another run if there is interest.| +|[[:​boards:​sbc:​sbc-386ex:​rev2.0|ECB SBC-386EX V2.0]] ​ |  10  ​| ​ $15 USD  |Phil Summers  ​  ​
-|[[:​builderpages:​trick-1:​start|ECB TRAM Carrier v0.5]]| ​ 9  |  $15  |Richard Edwards|Supports 4 INMOS TRAM'​s. Required Host Link Adapter and TRAM Modules (AUS)| +|[[:​boards:​ecb:​backplane-505-6508:​start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]] ​ |  0  |  $35  |John Coffman ​ |contact me if you want the Gerber files to manufacture this board  
-|[[:​boards:​sbc:​65c816_ecb_sbc:​65c816_ecb_sbc|ECB 65c816 SBC]]| ​ 15  |  $20  |Dan Werner|note the logic family on the board – U6 must be HCT!| +|[[:​boards:​ecb:​kiss-68030:​start|ECB MC68030 CPU & memory (KISS030)]] ​ |  20  |  $25  |Rich Cini  |v1.0-006;​ requires ​MF/PIC board  
-|[[:​boards:​ecb:​bus-extender:​start|ECB Bus Extender]]| ​ 4  |  $15  |Richard Edwards|note - extender board has row A and C. Row B is not part of the design although ribbon cable can be used to bring row B through. (AUS)|+|[[:​boards:​ecb:​4uart-usb:start|ECB 4UART-USB]] ​ |  13  |  $20  |John Coffman ​ |   | 
 +|[[:​boards:​ecb:​usb-fifo:​start|ECB USB FIFO]] ​ |  ​30  ​| ​ $6  |Will Sowerbutts ​ |New stock November 2018  ​
 +|[[:​boards:​sbc:​6x0x-atx-6u:​start|ECB 6x0x-ATX-6U]] ​ |  0  |  $20  |Andrew Bingham ​ |May do another run if there is interest. ​ 
 +|[[:​builderpages:​trick-1:​start|ECB TRAM Carrier v0.5]] ​ |  9  |  $15  |Richard Edwards ​ |Supports 4 INMOS TRAM's. Required Host Link Adapter and TRAM Modules (AUS)  
 +|[[:​boards:​sbc:​65c816_ecb_sbc:​65c816_ecb_sbc|ECB 65c816 SBC]]  |  15  |  $20  |Dan Werner ​ |note the logic family on the board – U6 must be HCT!  
 +|[[:​boards:​ecb:​bus-extender:​start|ECB Bus Extender]] ​ |  4  |  $15  |Richard Edwards ​ |note - extender board has row A and C. Row B is not part of the design although ribbon cable can be used to bring row B through. (AUS)  |
  
 \\ \\
Line 100: Line 108:
  
 ^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes| ^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes|
-|Regular Prototyping Board| ​  ​| ​  ​$20   ​|   ​| ​  | +|Regular Prototyping Board| ​  ​| ​ $20  |   ​| ​  | 
-|Buffered Prototyping Board v3.0a| ​ 20  |   ​$20   ​|Todd Goodman ​ |   |+|Buffered Prototyping Board v3.0a| ​ 20  |  $20  |Todd Goodman ​ |   |
 |Buffered Prototyping Board Mini Sea of PTH'​s| ​ 30  |  $20  |Josh Bensadon| ​  | |Buffered Prototyping Board Mini Sea of PTH'​s| ​ 30  |  $20  |Josh Bensadon| ​  |
 |Backplane (9 slot, terminated) - V4|  20  |  $15  |Todd Goodman| ​  | |Backplane (9 slot, terminated) - V4|  20  |  $15  |Todd Goodman| ​  |
Line 113: Line 121:
 |——HP5082 Display Board for SMB|  20  |  $10  |Todd Goodman| ​  | |——HP5082 Display Board for SMB|  20  |  $10  |Todd Goodman| ​  |
 |Bus Extender - V2|  20  |  $20  |Todd Goodman| ​  | |Bus Extender - V2|  20  |  $20  |Todd Goodman| ​  |
-|RAM & ROM - v2.0b| ​ 20  |  $20  |Todd Goodman|Arriving soon  ​+|RAM & ROM - v2.0b| ​ 20  |  $20  |Todd Goodman| ​  ​
-|Serial I/O v3.1|  20  |  $20  |Todd Goodman ​ |Arriving soon  ​|+|Serial I/O v3.1|  20  |  $20  |Todd Goodman ​ |   ​|
 |PIC/​RTC| ​  ​| ​ $20  |   ​| ​  | |PIC/​RTC| ​  ​| ​ $20  |   ​| ​  |
 |IMSAI MPU-A CPU Board (8080A) reproduction of original| ​ 20  |  $30  |Gary Kaufman| | |IMSAI MPU-A CPU Board (8080A) reproduction of original| ​ 20  |  $30  |Gary Kaufman| |
-|Propeller Based Console I/O - v2.51| ​  ​20   ​|  $20  |Todd Goodman ​ |Arriving soon  ​|+|Propeller Based Console I/O - v2.51| ​ 20  |  $20  |Todd Goodman ​ |   ​|
 |Altair 8800 CPU Board (8080A) reproduction of original| ​ 30  |  $30  |Gary Kaufman| ​  | |Altair 8800 CPU Board (8080A) reproduction of original| ​ 30  |  $30  |Gary Kaufman| ​  |
-|68000/​68010 CPU board v1.03b| ​ 20  |  $20  |Todd Goodman ​ |Arriving soon  ​|+|68000/​68010 CPU board v1.03b| ​ 20  |  $20  |Todd Goodman ​ |   ​|
 |8086 Master/​Slave CPU Board| ​ 20  |  $20  |Gary Kaufman| ​  | |8086 Master/​Slave CPU Board| ​ 20  |  $20  |Gary Kaufman| ​  |
 |6502 CPU board| ​ 20  |  $20  |Todd Goodman| ​  | |6502 CPU board| ​ 20  |  $20  |Todd Goodman| ​  |
-|16MB SRAM - v6.0a| ​ 20  |  $20  |Todd Goodman|Arriving soon  ​+|16MB SRAM - v6.0a| ​ 20  |  $20  |Todd Goodman| ​  ​
-|—- Mezzanine Board for SRAM - V06d|  60  |  $3  |Todd Goodman|Arriving soon  ​|+|—- Mezzanine Board for SRAM - V06d|  60  |  $3  |Todd Goodman| ​  ​|
 |16MB SRAM - V1|  60  |  $15  |Todd Goodman| ​  | |16MB SRAM - V1|  60  |  $15  |Todd Goodman| ​  |
 |—-Mezzanine board for SRAM - V06C|  3  |  $1  |Todd Goodman| ​  | |—-Mezzanine board for SRAM - V06C|  3  |  $1  |Todd Goodman| ​  |
Line 133: Line 141:
 |S-100 Bus Breakout Board| ​ 75  |  $5  |Don Caprio|Board In production| |S-100 Bus Breakout Board| ​ 75  |  $5  |Don Caprio|Board In production|
 |S-100 OPL3 V1|  20  |  $17  |Todd Goodman| ​  | |S-100 OPL3 V1|  20  |  $17  |Todd Goodman| ​  |
-|S-100 V2 MSX2 UTILITY Board| ​ 9  |  ​$20  ​|Jordi Solis|Looking for Beta tester ​ | +|S-100 V2 MSX2 UTILITY Board| ​ 9  |  ​15 €  ​|Jordi Solis|Looking for Beta tester ​ | 
-|Z-80 SBC v1.1a| ​ 20  |  $20  |Todd Goodman|Arriving soon  ​+|Z-80 SBC v1.1a| ​ 20  |  $20  |Todd Goodman| ​  ​
-|Z-80 Master v2.01| ​ 20  |  $20  |Todd Goodman|Arriving soon  ​+|Z-80 Master v2.01| ​ 20  |  $20  |Todd Goodman| ​  ​
-|ZFDC v1.0b| ​ 20  |  $20  |Todd Goodman|Arriving soon  ​+|ZFDC v1.0b| ​ 20  |  $20  |Todd Goodman| ​  ​
-|8088 Master v2 (Marked "​Version 01" on silkscreen)| ​ 20  |  $20  |Todd Goodman|Arriving soon  ​+|8088 Master v2 (Marked "​Version 01" on silkscreen)| ​ 20  |  $20  |Todd Goodman| ​  ​
-|80286 v2|  20  |  $20  |Todd Goodman|Arriving soon  ​+|80286 v2|  20  |  $20  |Todd Goodman| ​  ​
-|80386 v2.31| ​ 20  |  $20  |Todd Goodman|Arriving soon  ​+|80386 v2.31| ​ 20  |  $20  |Todd Goodman| ​  ​
-|32/64MB OTT RAM v3.11b| ​ 20  |  $26  |Todd Goodman|Arriving soon - 4-layer board  |+|32/64MB OTT RAM v3.11b| ​ 20  |  $26  |Todd Goodman| ​  | 
 +|PDP11 CPU v2|  20  |  $20  |Todd Goodman| ​  | 
 +|PDP11 Support v1.01| ​ 20  |  $20  |Todd Goodman| ​  |
  
 \\ \\
Line 172: Line 182:
 |MSX EPROM Cartridge| ​  ​|$5| ​  ​| ​  | |MSX EPROM Cartridge| ​  ​|$5| ​  ​| ​  |
 |Zeta/​Z80-2-ECB Prototypes|2|$12|Andrew Bingham| ​  | |Zeta/​Z80-2-ECB Prototypes|2|$12|Andrew Bingham| ​  |
-|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​38282303/​95749082/​index.htm|Elm GAL Programmer]]|  ​\\   \\ 7 \\  ​\\ 8|  ​\\   \\ 5 \\  ​\\ 5|  Jordi Solís \\   \\ Doug Gabbard \\  ​\\ Phillip Summers| ​ [[http://​elm-chan.org/​works/​pgal/​report_e.html|http://​elm-chan.org/​works/​pgal/​report_e.html]] ​ \\   ​\\ ​ [[http://​www.retrotechnology.com/​herbs_stuff/​gal.html|http://​www.retrotechnology.com/​herbs_stuff/​gal.html]] \\   ​\\ ​ [[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf|https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable%20logic%20devices%20-%20v1.6.pdf]] ​ |+|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​38282303/​95749082/​index.htm|Elm GAL Programmer]]|  ​\\   \\ 8|  ​5 € \\   \\ 5|  Jordi Solís \\   \\ Phillip Summers| ​ [[http://​elm-chan.org/​works/​pgal/​report_e.html|http://​elm-chan.org/​works/​pgal/​report_e.html]] ​ \\   ​\\ ​ [[http://​www.retrotechnology.com/​herbs_stuff/​gal.html|http://​www.retrotechnology.com/​herbs_stuff/​gal.html]] \\   ​\\ ​ [[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf|https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable ​logic devices ​v1.6.pdf]] ​ |
 |CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board  | |CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board  |
-|[[:​boards:​other:​idecf2din:​start|CF-IDE daughterboard]] for MPU302|2|$10|Bill Shen|Assembled and tested, CF disk not included. ​ |+|[[:​boards:​other:​idecf2din:​start|CF-IDE daughterboard]] for MPU302|2|$12|Bill Shen|Assembled and tested, CF disk not included. ​ |
 |[[:​builderpages:​plasmo:​z280rc|Z280RC]],​ Z280 for RC2014|4|$50|Bill Shen|Assembled and tested, include CP2102 USB adapter and 128Meg CF loaded with software ​ | |[[:​builderpages:​plasmo:​z280rc|Z280RC]],​ Z280 for RC2014|4|$50|Bill Shen|Assembled and tested, include CP2102 USB adapter and 128Meg CF loaded with software ​ |
 +|MC14500 board|9|$5|Richard Edwards|1bit "​CPU"​ board. ​ |
 +|KIM Uno Board only|8|$5US|Michael Cvet.|Kim Uno Board using Arduino see [[http://​obsolescence.wixsite.com/​obsolescence/​kim-uno-get-or-build-one|Tronixlabs ]](you can purchase kits from there also). I only have blank PC boards from an order I placed. Postage FREE to Aust. and US for 1 board. ​ |
 +|SYM-1 Maxi Board|2|$20US|Michael Cvet.|SYM-1 Maxi board, serial clone of SYM-1 board. [[https://​sites.google.com/​site/​gogleoops/​sym-1-maxi|See Old Micros website]]. Postage FREE to Aust and US for 1 board. ​ |
  
 ===== Chips/​Components ===== ===== Chips/​Components =====
Line 189: Line 202:
 |Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| | |Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| |
 |Rich Cini|rich.cini <at> gmail.com| |29 July 2014| | |Rich Cini|rich.cini <at> gmail.com| |29 July 2014| |
-|John Coffman ​USA|johninsd <at> gmail.com| |20 Apr 2018| |+|John Coffman|johninsd <at> gmail <​dot> ​com|USA|30 Nov 2018|jcoffman|
 |Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com| |18 Mar 2017| | |Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com| |18 Mar 2017| |
 |Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| | |Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| |
Line 197: Line 210:
 |Wayne Warthen|wwarthen <at> gmail.com| |3 Sep 2015| | |Wayne Warthen|wwarthen <at> gmail.com| |3 Sep 2015| |
 |Neil Breeden|nbreeden <at> me.com| |23 May 2014| | |Neil Breeden|nbreeden <at> me.com| |23 May 2014| |
-|Wolfgang Kabatzke|dr.wolfgangkabatzke:​online/​de (replace ':'​ with '​@'​ and '/'​ with '​.'​)| |15 Jan 2014| | 
 |Don Caprio|ilvunix <at> gmail.com| |05 Oct 2014| | |Don Caprio|ilvunix <at> gmail.com| |05 Oct 2014| |
 |Ewout Ros|ewout.ros <at> gmail.com| |19 Feb 2017| | |Ewout Ros|ewout.ros <at> gmail.com| |19 Feb 2017| |
Line 204: Line 216:
 |Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017| | |Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017| |
 |Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017| | |Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017| |
-|Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aust.|4 Aug 2018|[[:​builderpages:​b1ackmai1er:​start|b1ackmai1er]]|+|Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aust.|11 Dec 2018|[[:​builderpages:​b1ackmai1er:​start|b1ackmai1er]]|
 |Doug Gabbard|doug <at> retrodepot <dot> net|USA|15 Jun 2018| | |Doug Gabbard|doug <at> retrodepot <dot> net|USA|15 Jun 2018| |
 +|Rienk Koolstra|rkstar42 <at> gmail <dot> com|NL|13 Oct 2018| |
 +|Michael Cvetanovski|michael.cvet <at> gmail <dot> com|Aust|16 Nov 2018| |
 +
 +=====   =====
  
 \\ \\
  
  
boardinventory.1533348576.txt.gz · Last modified: 2018/08/03 22:09 by b1ackmai1er
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0