Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
boardinventory [2019/08/25 07:20]
b1ackmai1er [EuroCard ​Bus (ECB) Boards]
boardinventory [2020/05/26 15:14] (current)
craig [SBC-85] updated qty
Line 13: Line 13:
 |Zeta SBC V2 PCB|  20  |  $20  |Todd Goodman| | |Zeta SBC V2 PCB|  20  |  $20  |Todd Goodman| |
 |ParPortProp PCB|  20  |  $20  |Todd Goodman| | |ParPortProp PCB|  20  |  $20  |Todd Goodman| |
-|SST39SF040 (512 KiB Flash)|  ​ ​| ​ $4  |Sergey Kiselev|Can be preprogrammed with the firmware of your choice|+|SST39SF040 (512 KiB Flash)|  ​ ​| ​ $4  |Sergey Kiselev|Can be preprogrammed with the firmware of your choice|
  
 ==== Omega Home Computer Project (Sergey Kiselev) ==== ==== Omega Home Computer Project (Sergey Kiselev) ====
  
 ^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes| ^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes|
-|[[https://​github.com/​skiselev/​omega|Omega Keyboard PCB Version 1.0]]|  ​ ​| ​ $15  |Sergey Kiselev| ​  | +|[[https://​github.com/​skiselev/​omega/​blob/​master/​Keyboard.md|Omega Keyboard PCB Version 1.1]]|  ​ ​| ​ $15  |Sergey Kiselev| ​  | 
- +|[[https://​github.com/​skiselev/​omega/​blob/​master/​Mainboard.md|Omega Main Board PCB Version 1.2]]| ​ 8  |  $20  |Sergey Kiselev| ​  | 
-\\ +|MSX interface cards| ​  ​| ​  | |   | 
 +|[[http://​obsonet.blogspot.com/​|Obsonet network card v1.0]]| ​ 12  |  $10  |Jordi Solis| ​  | 
 +|[[https://​github.com/​costarc/​MSXPi|MSX-Pi v0.7]]| ​ 3  |  $10  |Jordi Solis| ​  | 
 +|[[https://​github.com/​Wierzbowsky/​MSX_Breadboard_Large|MSX prototype board]]| ​ 3  |  $10  |Jordi Solis| ​  | 
 +|[[https://​github.com/​RBSC/​F4-FMPAC|F4-FMPAC module board]]| ​ 5  |  $5  |Jordi Solis| ​  |
  
 ==== Minimal 8085/Z80 Single Board Computer ==== ==== Minimal 8085/Z80 Single Board Computer ====
  
 ^Board / Component^Stock^Price^Order Contact^Notes| ^Board / Component^Stock^Price^Order Contact^Notes|
-|[[:​boards:​sbc:​minimax8085:​start|MiniMax8085]][[:​boards:​sbc:​minimax8085:​start| PCB]]|  ​12  |  $5  |Sergey Kiselev ​ |   | +|[[:​boards:​sbc:​minimax8085:​start|MiniMax8085]][[:​boards:​sbc:​minimax8085:​start| PCB]]| ​ 5  |  $5 USD  |Phillip Summers ​ |   |
-|   ​| ​ 5  |$5 USD  |Phillip Summers ​ |   |+
 |[[:​builderpages:​rhkoolstar:​sbc-2g-512|]] ​ |  2  |  $5 USD  |Phillip Summers|Rienk Koolstra'​s Z80 SBC inspired by Grant Searle'​s 9 chip breadboard design. ​ | |[[:​builderpages:​rhkoolstar:​sbc-2g-512|]] ​ |  2  |  $5 USD  |Phillip Summers|Rienk Koolstra'​s Z80 SBC inspired by Grant Searle'​s 9 chip breadboard design. ​ |
-|   ​|  ​ ​| ​ $5  |Rienk Koolstra ​ |price includes shipping ​ | +|   ​|  ​ ​| ​ $5  |Rienk Koolstra ​ |price includes shipping ​ | 
-|[[https://​github.com/​skiselev/​easy_z80|Easy Z80 V1.1 PCB]]  | ​|$5 ​ |Sergey Kiselev ​ |   | +|[[https://​github.com/​skiselev/​easy_z80|Easy Z80 V1.1 PCB]]  | ​|$5 ​ |Sergey Kiselev ​ |   | 
- +|[[https://​hackaday.io/​project/​168014-rc-z8basic|RC-Z8BASIC]] ​ |3  |$5 USD  |Phillip Summers ​ |Just4Fun'​s [[https://​www.retrobrewcomputers.org/​forum/​index.php?​t=msg&​th=404&​start=0&​|Z8671 ]]based board. ​ | 
-\\ +|[[:​builderpages:​plasmo:​zrcc:​zrcc1_1|ZRCC]] Kit, rev1.1 ​ |5  |20 USD|Bill Shen|22MHz CP/M-ready Z80 SBC, 64meg CF disk included. Shipping is 5 USD in USA only.| 
 +|  [[:​builderpages:​plasmo:​zrcc:​zrcc1|ZRCC rev1.1]] ​ Assembled, tested ​ |2  |45 USD|Bill Shen|Assembled and tested 22MHz CP/M-ready Z80 SBC, 64meg CF disk included. Shipping is 5 USD in USA only.|
  
 ==== MPU302, Repurposed Soneplex SPX-MPU board for CP/M-68K ==== ==== MPU302, Repurposed Soneplex SPX-MPU board for CP/M-68K ====
Line 47: Line 49:
 |Tiny68k_r2 PCB|6|5 USD|Phillip Summers| | |Tiny68k_r2 PCB|6|5 USD|Phillip Summers| |
  
-\\+==== Multicomp ====
  
 +^Board^Stock^Price Currency^Order Contact^Notes|
 +|[[:​boards:​sbc:​multicomp:​cycloneii-c:​start|Multicomp IIc]]  |  4  |  $5 USD  |Phillip Summers ​ |v1.10 boards ​ |
 +|[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cycloneiv.jpg|Muliticomp IV]]  |  9  |  $5  |Rienk Koolstra ​ |price includes shipping – see [[:​builderpages:​rhkoolstar:​start|main page]] ​ |
  
-==== Multicomp ​====+==== AVR Based board ====
  
 ^Board^Stock^Price Currency^Order Contact^Notes| ^Board^Stock^Price Currency^Order Contact^Notes|
-|[[:​boards:​sbc:​multicomp:​cycloneii-c:​start|Multicomp IIc]]  |  0  |  $5 USD  |Phillip Summers ​ |v1.10 boards ​ | +|[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cpmega88.jpg|CP/Mega88]]  |  ​ ​| ​ $ ​|Rienk Koolstra ​ |AVR implementation of Takashi Toyoshima'​s CP/Mega88 in SMD \\ price includes shipping ​see [[:​builderpages:​rhkoolstar:​start|main page]] ​ |
-|[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cycloneiv.jpg|Muliticomp IV]]  |  ​ ​| ​ $ ​|Rienk Koolstra ​ |price includes shipping ​– see [[:​builderpages:​rhkoolstar:​start|main page]] ​ |+
  
-\\+==== SBC-85 ====
  
 +^**Board** ^**Stock** ^**Price** ^**Location** ^**Order Contact** ^**Notes** |
 +|**ASSEMBLED** | | | | | |
 +|SBC CPU v1.2 Assembled|1|$75|USA|Craig Andrews| |
 +| | | | | | |
 +|**BARE BOARDS** | | | | | |
 +|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cpu-v1-1-1-2-documentation/​|SBC CPU v1.2 -Tin Fingers]]|0|$2.75|USA|Craig Andrews| |
 +|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cpu-v1-1-1-2-documentation/​|SBC CPU v1.2 - Gold Fingers]]|3|$5|USA|Craig Andrews| |
 +|[[http://​sbc-85.com/​index.php/​documentation/​backplane-4-documentation/​|Backplane-4 v1.0]]|3|$2.75|USA|Craig Andrews| |
 +|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cassette-tape-interface-documentation/​|Cassette Interface v1.0]]|3|$2.75|USA|Craig Andrews| |
 +|[[https://​hackaday.io/​project/​170832-magnetic-bubble-memory-makes-a-comeback|Bus Monitor Supreme v1.1b]]|0|$5|USA|Craig Andrews|May contain undiscovered bugs so it is still considered to be a prototype|
 +|[[https://​hackaday.io/​project/​170832-magnetic-bubble-memory-makes-a-comeback|1Mbit 7110A Bubble]]|2|$10|USA|Craig Andrews|May contain undiscovered bugs so it is still considered to be a prototype|
 +|Protoboard v1.0c|5|$2.75|USA|Craig Andrews| |
  
-==== AVR Based board ====+\\
  
-^Board^Stock^Price Currency^Order Contact^Notes| 
-|[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cpmega88.jpg|CP/​Mega88]] ​ |  11  |  $2  |Rienk Koolstra ​ |AVR implementation of Takashi Toyoshima'​s CP/Mega88 in SMD \\ price includes shipping - see [[:​builderpages:​rhkoolstar:​start|main page]] ​ | 
  
 ===== EuroCard ​Bus (ECB) Boards ===== ===== EuroCard ​Bus (ECB) Boards =====
Line 69: Line 83:
 |[[:​boards:​ecb:​cassette_intf:​start|Cassette Interface]]| ​ 4  |  $15  |Jordi Solis| | |[[:​boards:​ecb:​cassette_intf:​start|Cassette Interface]]| ​ 4  |  $15  |Jordi Solis| |
 |[[:​boards:​ecb:​diskio-v3:​start|Disk I/O V3]]  |  20  |  $10  |Todd Goodman ​ |   | |[[:​boards:​ecb:​diskio-v3:​start|Disk I/O V3]]  |  20  |  $10  |Todd Goodman ​ |   |
-| |  ​ ​| ​ 10 USD  |Phil Summers| | +| |  ​ ​| ​ 10 USD  |Phil Summers| | 
-|[[:​boards:​ecb:​propio:​start|Prop I/O V2]]|  ​20  ​| ​ $20  |Wayne Warthen| | +|[[:​boards:​ecb:​propio:​start|Prop I/O V2]]|  ​ ​| ​ $20  |Wayne Warthen| | 
-| |  ​ ​| ​ $15  |Jordi Solis| | +| |  ​ ​| ​ $15  |Jordi Solis| | 
-|[[:​boards:​ecb:​backplane-8:​start|ECB Backplane (8 slot)]]|  ​11  ​| ​ 20 USD  |John Coffman|167mm version, 1/8" thickness| +|[[:​boards:​ecb:​backplane-8:​start|ECB Backplane (8 slot)]]|  ​ ​| ​ 20 USD  |John Coffman|167mm version, 1/8" thickness| 
-|   ​|  ​32  ​| ​  |Rich Cini  |co-stocked for mini-68k ​ | +|   ​|  ​27  ​| ​  |Rich Cini  |co-stocked for mini-68k ​ | 
-|[[:​boards:​ecb:​backplane-3:​start|ECB Mini Backplane (3 slot)]]|  2  |  $3 USD  |Phil Summers| | +|[[:​boards:​ecb:​backplane-3:​start|ECB Mini Backplane (3 slot)]]| ​ 50  |  $5  |Will Sowerbutts|New stock November 2018: 1.6mm, HASL lead solder finish.| 
-|  50  |  $5  |Will Sowerbutts|New stock November 2018: 1.6mm, HASL lead solder finish.| +|[[:​builderpages:​b1ackmai1er:​backplane-4|ECB Mini Backplane (4 slot 10×10)]]|  ​ ​| ​ $5 USD  |Phil Summers| | 
-|[[:​builderpages:​b1ackmai1er:​backplane-4|ECB Mini Backplane (4 slot 10×10)]]|  ​ ​| ​ $5 USD  |Phil Summers| | +|[[:​boards:​sbc:​sbc_v2:​sbc_v2-004|SBC-V2-004v]]| |$10 USD  |Phil Summers|Updated design including reset correction, onboard ide connector, sound, super capacitor, clock divider, rs232-ttl solder jumpers - under development - only 1 board build so far. One minor errata is applicable.|
-|[[:​boards:​sbc:​sbc_v2:​sbc_v2-004|SBC-V2-004v]]| |$10 USD  |Phil Summers|Updated design including reset correction, onboard ide connector, sound, super capacitor, clock divider, rs232-ttl solder jumpers - under development - only 1 board build so far. One minor errata is applicable.|+
 |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003A]]| ​ 4  |  $10 USD  |Phil Summers| ​  \\ Includes the Kontron reset correction.| |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003A]]| ​ 4  |  $10 USD  |Phil Summers| ​  \\ Includes the Kontron reset correction.|
 |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003]] ​ |  2  |  $15  |Jordi Solis  |   | |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003]] ​ |  2  |  $15  |Jordi Solis  |   |
-|[[:​boards:​sbc:​sbc-188:​start|SBC-188]] ​ |  0  |  $20  |Todd Goodman ​ ​| ​  ​+|[[:​boards:​sbc:​sbc-188:​start|SBC-188 ​v3]]  |  0  |  $25  |John Coffman ​ |4-layer 25mhz respin of the SBC-188 ups memory to 1Mb & adds PPIDE connector. This board is hosted at "​PCBway.com",​ and those outside of the USA are encouraged to order & host the board in their locale.  ​
-  \\ 4MEM  ​| ​  ​|  $20  ​| ​  ​| ​  |+|[[:​boards:​sbc:​sbc-188:​start|SBC-188 v3]]  ​| ​ ​9  ​|  $25  |Richard Edwards ​ |Australia based stock of SBC-188 v3 board. ​ | 
 +|[[:​boards:​sbc:​ns32000|SBC NS32000]] ​ |  0  |  TBD  |John Coffman ​ |Prototype in fab (5/​12/​2020). Not available until I prove that it mostly works. ​ | 
 +|  4MEM  |   ​| ​  |   ​| ​  |
 |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  4  |  $15  |Ewout Ros  |   | |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  4  |  $15  |Ewout Ros  |   |
 |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  15  |  $15  |John Coffman ​ |   | |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  15  |  $15  |John Coffman ​ |   |
-|[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  ​ ​| ​ $10 USD  |Phil Summers ​ |17-10-05 version. ​ |+|[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  ​ ​| ​ $10 USD  |Phil Summers ​ |17-10-05 version. ​ |
 |[[:​boards:​ecb:​zilog-peripherals:​start|Zilog Peripherals]] ​ |  1  |  ​$10 USD  |Phil Summers ​ |   | |[[:​boards:​ecb:​zilog-peripherals:​start|Zilog Peripherals]] ​ |  1  |  ​$10 USD  |Phil Summers ​ |   |
 |[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v02 (SCGS)]] ​ |  1  |  $10  |Jordi Solis  |   | |[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v02 (SCGS)]] ​ |  1  |  $10  |Jordi Solis  |   |
-|[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v03 (SCGS)]] ​ |  ​ ​| ​ ​10 USD  |Phil Summers ​ |   |+|[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v03 (SCGS)]] ​ |  ​ ​| ​ ​10 USD  |Phil Summers ​ |   |
 |[[:​boards:​ecb:​bus-monitor:​start|ECB Bus Monitor]] ​ |  20  |  $20  |Todd Goodman ​ |   | |[[:​boards:​ecb:​bus-monitor:​start|ECB Bus Monitor]] ​ |  20  |  $20  |Todd Goodman ​ |   |
 |MSX Cartridge reader ​ |   ​| ​ $20  |   ​| ​  | |MSX Cartridge reader ​ |   ​| ​ $20  |   ​| ​  |
 |[[:​boards:​ecb:​dsky:​start|DSKY V2]]  |  5  |  $15  |Jordi Solis  |   | |[[:​boards:​ecb:​dsky:​start|DSKY V2]]  |  5  |  $15  |Jordi Solis  |   |
 |[[:​boards:​ecb:​vdu:​start|ECB VDU]]  |1|  $10 USD  |Phil Summers ​ |   | |[[:​boards:​ecb:​vdu:​start|ECB VDU]]  |1|  $10 USD  |Phil Summers ​ |   |
-|[[:​boards:​ecb:​ramfloppy:​start:​r12|ECB RAM-Floppy R11]]  |4  |10 USD  |Phil Summers ​ |   |+|[[:​boards:​ecb:​ramfloppy:​start:​r12|ECB RAM-Floppy R11]]  |4  |$10 USD  |Phil Summers ​ |   |
 |[[:​boards:​ecb:​4pio:​start|ECB 4PIO R03]]  |  2  |  Free  |Phil Summers ​ |Note [[:​boards:​ecb:​4pio:​errata|Errata]] with the R03 board. Postage is 2.00 AUD within Australia, $7.50AUD overseas. ​ | |[[:​boards:​ecb:​4pio:​start|ECB 4PIO R03]]  |  2  |  Free  |Phil Summers ​ |Note [[:​boards:​ecb:​4pio:​errata|Errata]] with the R03 board. Postage is 2.00 AUD within Australia, $7.50AUD overseas. ​ |
 |[[:​boards:​ecb:​modprn:​start|ECB ModPrn R03]]  |   ​| ​  ​| ​  ​| ​  | |[[:​boards:​ecb:​modprn:​start|ECB ModPrn R03]]  |   ​| ​  ​| ​  ​| ​  |
-|[[:​boards:​ecb:​mf-pic:​start|ECB MF/PIC (68K Multifunction)]] ​ |  ​29  ​| ​ $20  |Rich Cini  |v3.1-008 (20) and v3.1-007 (9). Includes National Semiconductor PIC chip with purchase. ​ | +|[[:​boards:​ecb:​mf-pic:​start|ECB MF/PIC (68K Multifunction)]] ​ |  ​19  ​| ​ $20  |Rich Cini  |v4.0-008 (19) and v3.1-007 (9). Includes National Semiconductor PIC chip with purchase. ​ | 
-|[[http://​retrobrewcomputers.org/​​n8vem-pbwiki-archive/​​0/​​35845334/​​48860720/​35269969/​index.htm|ECB Dual IDE with FDC]]  |  ​ ​| ​ $20  |Rich Cini  |v2.0-006 ​ | +|[[http://​retrobrewcomputers.org/​​n8vem-pbwiki-archive/​​0/​​35845334/​​48860720/​35269969/​index.htm|ECB Dual IDE with FDC]]  |  ​ ​| ​ $20  |Rich Cini  |v2.0-006 ​ | 
-|[[:​boards:​ecb:​adio:​start|ECB A/​D-I/​O]] ​ |  ​ ​| ​ $20  |Rich Cini  |v1.0-001 ​ |+|[[:​boards:​ecb:​adio:​start|ECB A/​D-I/​O]] ​ |  ​3  |  $20  |Rich Cini  |v1.0-001 ​ | 
 +|[[:​boards:​ecb:​adio:​start|ECB 2S1P Multiport Board]] ​ |  18  ​| ​ $20  |Rich Cini  |v1.0-001 ​ |
 |[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​35845601/​index.htm|uPD7220 V2]]  |   ​| ​ $20  |   ​| ​  | |[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​35845601/​index.htm|uPD7220 V2]]  |   ​| ​ $20  |   ​| ​  |
 |[[:​boards:​ecb:​backplane-12:​start|ECB Extended Backplane (12 slot)]] ​ |  1  |  $22  |Jordi Solis  |   | |[[:​boards:​ecb:​backplane-12:​start|ECB Extended Backplane (12 slot)]] ​ |  1  |  $22  |Jordi Solis  |   |
 |ECB Advanced Prototyping ​board ​ |   ​| ​ $20  |   ​| ​  | |ECB Advanced Prototyping ​board ​ |   ​| ​ $20  |   ​| ​  |
-|N8VEM Mini SBC v8  |   ​| ​ ​$20  ​|   ​| ​  | +|N8VEM Mini SBC v8  |   ​| ​  ​|   ​| ​  | 
-|[[:​boards:​ecb:​mini-68k:​start|ECB Mini-68K]] ​ |  ​28  ​| ​ $20  |Rich Cini  |v2.0-007; requires MF/PIC board to operate. ​ | +|[[:​boards:​ecb:​mini-68k:​start|ECB Mini-68K]] ​ |  ​26  ​| ​ $20  |Rich Cini  |v2.0-007; requires MF/PIC board to operate. ​ | 
-|[[:​boards:​ecb:​cvdu:​start|ColorVDU V2]]  |  ​14  ​| ​ $20  |Wayne Warthen ​ |   | +|[[:​boards:​ecb:​cvdu:​start|ColorVDU V2]]  |  ​ ​| ​ $20  |Wayne Warthen ​ |   | 
-|[[:​boards:​ecb:​vga3:​vga3|ECB VGA3]] ​ |  ​10  ​| ​ $25  |John Coffman ​ |4-layer ​board. ​ |+|[[:​boards:​ecb:​vga3:​vga3|ECB VGA3]] ​ |  ​ ​| ​ $25  |John Coffman ​ |4-layer ​board. ​ |
 |[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]] ​ |  20  |  $20  |Todd Goodman ​ |   | |[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]] ​ |  20  |  $20  |Todd Goodman ​ |   |
 |[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]] ​ |  12  |  $20  |John Coffman ​ |   | |[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]] ​ |  12  |  $20  |John Coffman ​ |   |
-|[[:​boards:​sbc:​z180_mark_iv:​z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]] ​ |   ​|   ​| ​  ​  ​+|[[:​boards:​sbc:​z180_mark_iv:​z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]] ​ |0  ​|   |John Coffman  ​|Contact me if interested.  ​
-|[[:​boards:​sbc:​sbc-386ex:​rev2.0|ECB SBC-386EX V2.0]] ​ |  ​ ​| ​ $15 USD  |Phil Summers ​ |   | +|[[:​boards:​sbc:​sbc-386ex:​rev2.0|ECB SBC-386EX V2.0]] ​ |  ​ ​| ​ $15 USD  |Phil Summers ​ |   | 
-|[[:​boards:​ecb:​backplane-505-6508:​start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]] ​ |  ​2  ​ $10 USD  ​|Phil Summers  ​|   | +|[[:​boards:​ecb:​backplane-505-6508:​start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]] ​ |   ​  ​  ​|   | 
-|[[:​boards:​ecb:​kiss-68030:​start|ECB MC68030 CPU & memory (KISS030)]] ​ |  ​20  ​| ​ $25  |Rich Cini  |v1.0-006;​​ requires ​MF/​​PIC ​board ​ |+|[[:​boards:​ecb:​kiss-68030:​start|ECB MC68030 CPU & memory (KISS030)]] ​ |  ​12  ​| ​ $25  |Rich Cini  |v1.0-006;​​ requires ​MF/​​PIC ​board |
 |[[:​boards:​ecb:​4uart-usb:​start|ECB 4UART-USB]] ​ |  13  |  $20  |John Coffman ​ |   | |[[:​boards:​ecb:​4uart-usb:​start|ECB 4UART-USB]] ​ |  13  |  $20  |John Coffman ​ |   |
 |[[:​boards:​ecb:​usb-fifo:​start|ECB USB FIFO]] ​ |  30  |  $6  |Will Sowerbutts ​ |New stock November 2018. Driver now in ROMWBW. ​ | |[[:​boards:​ecb:​usb-fifo:​start|ECB USB FIFO]] ​ |  30  |  $6  |Will Sowerbutts ​ |New stock November 2018. Driver now in ROMWBW. ​ |
Line 117: Line 133:
 |[[:​boards:​sbc:​65c816_ecb_sbc:​65c816_ecb_sbc|ECB 65c816 SBC]]  |  15  |  $20  |Dan Werner ​ |note the logic family on the board – U6 must be HCT!  | |[[:​boards:​sbc:​65c816_ecb_sbc:​65c816_ecb_sbc|ECB 65c816 SBC]]  |  15  |  $20  |Dan Werner ​ |note the logic family on the board – U6 must be HCT!  |
 |[[:​boards:​ecb:​bus-extender:​start|ECB Bus Extender]] ​ |  4  |  $15  |Richard Edwards ​ |note - extender board has row A and C. Row B is not part of the design although ribbon cable can be used to bring row B through. (AUS)  | |[[:​boards:​ecb:​bus-extender:​start|ECB Bus Extender]] ​ |  4  |  $15  |Richard Edwards ​ |note - extender board has row A and C. Row B is not part of the design although ribbon cable can be used to bring row B through. (AUS)  |
- 
-\\ 
- 
  
 ===== S-100 Bus Boards ===== ===== S-100 Bus Boards =====
Line 170: Line 183:
 |MSDOS Support v3a|  20  |  $20  |Todd Goodman| ​  | |MSDOS Support v3a|  20  |  $20  |Todd Goodman| ​  |
 |16-bit VGA v15a|  20  |  $20  |Todd Goodman| ​  | |16-bit VGA v15a|  20  |  $20  |Todd Goodman| ​  |
 +|8-bit VGA v11|  20  |  $20  |Todd Goodman| ​  |
 |Trident Adapter v15a|  20  |  $5  |Todd Goodman| ​  | |Trident Adapter v15a|  20  |  $5  |Todd Goodman| ​  |
 |Full Size 80486 v15a|  20  |  $36  |Todd Goodman| ​  | |Full Size 80486 v15a|  20  |  $36  |Todd Goodman| ​  |
 |CCS-2422E| ​ 20  |  $20  |Todd Goodman| ​  | |CCS-2422E| ​ 20  |  $20  |Todd Goodman| ​  |
 |Bus Display| ​ 60  |  $20  |Todd Goodman| ​  | |Bus Display| ​ 60  |  $20  |Todd Goodman| ​  |
 +|FPGA v2|  20  |  $32  |Todd Goodman| ​  |
 +|– FPGA Shield #0|  20  |  $8  |Todd Goodman| ​  |
 +|– FPGA Shield #1|  20  |  $8  |Todd Goodman| ​  |
 +|68030 v1.1|  20  |  $20  |Todd Goodman| ​  |
 +|Z-80 FPGA v1.1B| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Mega 328-2560 v1.11| ​ 20  |  $20  |Todd Goodman| ​  |
  
-\\+===== ISA Bus Boards =====
  
 +==== Xi 8088 Project (Sergey Kiselev) ====
 +
 +^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  |
 +|Xi 8088 PCB|20|$25|Todd Goodman| ​  |
 +|ISA Backplane PCB|40|$25|Todd Goodman| ​  |
 +|ISA SVGA v1.1 PCB|40|$10|Todd Goodman| ​  |
 +|XT-CF-Lite PCB|30|$12|Todd Goodman| ​  |
 +|ISA OPL2 PCB|40|$10|Todd Goodman| ​  |
 +|ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  |
 +|Micro 8088 PCB|0|$20|Sergey Kiselev| ​  |
 +|ISA 8-Bit Backplane PCB|0|$10|Sergey Kiselev| ​  |
 +
 +===== Other (formerly known as "​Mini"​) Boards =====
 +
 +^  **Board / Component** ​   ^  **Stock** ​   ^  **Price** ​   ^  **Order Contact** ​   ^  **Notes** ​   |
 +|[[:​boards:​other:​ppide|PPIDE]]| ​  | |   ​| ​  |
 +|PPISD|20|$5|Todd Goodman| ​  |
 +|AT2XTKBD|20|$5|Todd Goodman| |
 +|ECB to Z80 Socket Adapters| ​  ​|$5| ​  ​| ​  |
 +|Juha SD|   ​|$5| ​  ​| ​  |
 +|SCSI2IDEv2|40|$10|Todd Goodman| ​  |
 +|XT-IDE (ISA Bus)|0|$12|Todd Goodman|Not sure about reordering, new version created by someone on VCF  |
 +|XT-FDC|40|$12|Todd Goodman| ​  |
 +|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​37113829/​index.htm|MSX EPROM Cartridge]]| ​  ​|$5| ​  ​| ​  |
 +|Zeta/​Z80-2-ECB Prototypes|2|$12|Andrew Bingham| ​  |
 +|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​38282303/​95749082/​index.htm|Elm GAL Programmer]]| ​ 2 \\   \\ 8|  5 € \\   \\ 5|  Jordi Solis \\   \\ Phillip Summers| ​ [[http://​elm-chan.org/​works/​pgal/​report_e.html|http://​elm-chan.org/​works/​pgal/​report_e.html]] ​ \\   ​\\ ​ [[http://​www.retrotechnology.com/​herbs_stuff/​gal.html|http://​www.retrotechnology.com/​herbs_stuff/​gal.html]] \\   ​\\ ​ [[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf|https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf]] ​ |
 +|CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board  |
 +|[[:​boards:​other:​idecf2din:​start|CF-IDE daughterboard]] for MPU302|2|$12|Bill Shen|Assembled and tested, CF disk not included. ​ |
 +|[[:​builderpages:​plasmo:​z280rc|Z280RC]],​ Z280 for RC2014|4|$50|Bill Shen|Assembled and tested, include CP2102 USB adapter and 128Meg CF loaded with software ​ |
 +|MC14500 board|7|$5|Richard Edwards|1bit "​CPU"​ board. ​ |
 +|KIM Uno Board only|8|$5US|Michael Cvet.|Kim Uno Board using Arduino see [[http://​obsolescence.wixsite.com/​obsolescence/​kim-uno-get-or-build-one|Tronixlabs ]](you can purchase kits from there also). I only have blank PC boards from an order I placed. Postage FREE to Aust. and US for 1 board. ​ |
 +|SYM-1 Maxi Board|2|$20US|Michael Cvet.|SYM-1 Maxi board, serial clone of SYM-1 board. [[https://​sites.google.com/​site/​gogleoops/​sym-1-maxi|See Old Micros website]]. Postage FREE to Aust and US for 1 board. ​ |
 +|[[https://​hackaday.io/​Just4Fun|uTerm-S]]|4|5AUD|Phil Summers|Just4Fun'​s VT100 VGA Serial terminal ​ |
 +|[[https://​velesoft.speccy.cz/​data-gear.htm|Datagear DMA board]]|4|$3US|Phil Summers|Datagear DMA piggy back board. ​ |
 +
 +===== Chips/​Components =====
 +
 +^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  |
 +|80C188-25 CPU|0|$4|Todd Goodman| ​  |
 +|WD37C65 FDC|   ​|$8| ​  ​| ​  |
 +|NS32202|134|Free with MF/​PIC| ​ Rich Cini or John Coffman| ​  |
 +
 +===== S-100 Bus Boards =====
 +
 +^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes|
 +|Regular Prototyping Board| ​  ​| ​ $20  |   ​| ​  |
 +|Buffered Prototyping Board v3.0a| ​ 20  |  $20  |Todd Goodman ​ |   |
 +| |  4  |  $20  |Jordi Solis  |   |
 +|Buffered Prototyping Board Mini Sea of PTH'​s| ​ 30  |  $25  |Josh Bensadon (in Canada), Todd Goodman (elsewhere)| ​  |
 +|Backplane (9 slot, terminated) - V4|  20  |  $15  |Todd Goodman| ​  |
 +|Backplane (Antony'​s 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman| ​  |
 +|Dual IDE - Version 03a|  20  |  $20  |Todd Goodman ​ |   |
 +|Parallel ASCII Keyboard| ​  ​| ​ $20  |   ​| ​  |
 +|4MB SRAM|  0  |  $20  | |   |
 +|System Monitor Board - V3|  40  |  $20  |Todd Goodman| ​  |
 +|——TIL311 Display Board for SMB|  20  |  $6  |Todd Goodman| ​  |
 +|——LED Bar Display Board for SMB|  20  |  $10  |Todd Goodman| ​  |
 +|——HP5082 Display Board for SMB|  20  |  $10  |Todd Goodman| ​  |
 +|Bus Extender - V2|  20  |  $20  |Todd Goodman| ​  |
 +|RAM & ROM - v2.0b| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Serial I/O v3.1|  20  |  $20  |Todd Goodman ​ |   |
 +|PIC/​RTC| ​  ​| ​ $20  |   ​| ​  |
 +|IMSAI MPU-A CPU Board (8080A) reproduction of original| ​ 20  |  $30  |Gary Kaufman| |
 +|Propeller Based Console I/O - v2.51| ​ 20  |  $20  |Todd Goodman ​ |   |
 +|Altair 8800 CPU Board (8080A) reproduction of original| ​ 30  |  $30  |Gary Kaufman| ​  |
 +|68000/​68010 CPU board v1.03b| ​ 20  |  $20  |Todd Goodman ​ |   |
 +|8086 Master/​Slave CPU Board| ​ 20  |  $20  |Gary Kaufman| ​  |
 +|6502 CPU board| ​ 20  |  $20  |Todd Goodman| ​  |
 +|16MB SRAM - v6.0a| ​ 20  |  $20  |Todd Goodman| ​  |
 +|—- Mezzanine Board for SRAM - V06d|  60  |  $3  |Todd Goodman| ​  |
 +|16MB SRAM - V1|  60  |  $15  |Todd Goodman| ​  |
 +|—-Mezzanine board for SRAM - V06C|  3  |  $1  |Todd Goodman| ​  |
 +|Parallel I/O Board V2|  20  |  $20  |Todd Goodman| ​  |
 +|Bus Terminator| ​ 20  |  $20  |Todd Goodman| ​  |
 +|S-100 PC-AT Ver 02 (DOS Support Board)| ​ 0  |  $15  |Neil Breeden| ​  |
 +|S-100 Front Panel (aka FP Mini)| ​ 4  |  $20  |Don Caprio| ​  |
 +|Front Panel - Full Size (reproduction of a popular classic)| ​ 2  |  ??  |Don Caprio|Looking for Beta tester|
 +|S-100 Bus Breakout Board| ​ 75  |  $5  |Don Caprio|Board In production|
 +|S-100 OPL3 V1|  20  |  $17  |Todd Goodman| ​  |
 +|S-100 V2 MSX2 UTILITY Board| ​ 9  |  15 €  |Jordi Solis|Looking for Beta tester ​ |
 +|Z-80 SBC v1.1a| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Z-80 Master v2.01| ​ 20  |  $20  |Todd Goodman| ​  |
 +|ZFDC v1.0b| ​ 20  |  $20  |Todd Goodman| ​  |
 +|8088 Master v2 (Marked "​Version 01" on silkscreen)| ​ 20  |  $20  |Todd Goodman| ​  |
 +|80286 v2|  20  |  $20  |Todd Goodman| ​  |
 +|80386 v2.31| ​ 20  |  $20  |Todd Goodman| ​  |
 +|32/64MB OTT RAM v3.11b| ​ 20  |  $26  |Todd Goodman| ​  |
 +|PDP11 CPU v2|  20  |  $20  |Todd Goodman| ​  |
 +|PDP11 Support v1.01| ​ 20  |  $20  |Todd Goodman| ​  |
 +|MSDOS Support v3a|  20  |  $20  |Todd Goodman| ​  |
 +|16-bit VGA v15a|  20  |  $20  |Todd Goodman| ​  |
 +|8-bit VGA v11|  20  |  $20  |Todd Goodman| ​  |
 +|Trident Adapter v15a|  20  |  $5  |Todd Goodman| ​  |
 +|Full Size 80486 v15a|  20  |  $36  |Todd Goodman| ​  |
 +|CCS-2422E| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Bus Display| ​ 60  |  $20  |Todd Goodman| ​  |
 +|FPGA v2|  20  |  $32  |Todd Goodman| ​  |
 +|– FPGA Shield #0|  20  |  $8  |Todd Goodman| ​  |
 +|– FPGA Shield #1|  20  |  $8  |Todd Goodman| ​  |
 +|68030 v1.1|  20  |  $20  |Todd Goodman| ​  |
 +|Z-80 FPGA v1.1B| ​ 20  |  $20  |Todd Goodman| ​  |
  
 ===== ISA Bus Boards ===== ===== ISA Bus Boards =====
Line 189: Line 310:
 |ISA OPL2 PCB|40|$10|Todd Goodman| ​  | |ISA OPL2 PCB|40|$10|Todd Goodman| ​  |
 |ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  | |ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  |
-|Micro 8088 PCB|9|$20|Sergey Kiselev| ​  | +|Micro 8088 PCB|0|$20|Sergey Kiselev| ​  | 
-|ISA 8-Bit Backplane PCB|6|$10|Sergey Kiselev| ​  |+|ISA 8-Bit Backplane PCB|0|$10|Sergey Kiselev| ​  |
  
-\\+===== Other (formerly known as "​Mini"​) Boards =====
  
 +^  **Board / Component** ​   ^  **Stock** ​   ^  **Price** ​   ^  **Order Contact** ​   ^  **Notes** ​   |
 +|[[:​boards:​other:​ppide|PPIDE]]| ​  | |   ​| ​  |
 +|PPISD|20|$5|Todd Goodman| ​  |
 +|AT2XTKBD|20|$5|Todd Goodman| |
 +|ECB to Z80 Socket Adapters| ​  ​|$5| ​  ​| ​  |
 +|Juha SD|   ​|$5| ​  ​| ​  |
 +|SCSI2IDEv2|40|$10|Todd Goodman| ​  |
 +|XT-IDE (ISA Bus)|0|$12|Todd Goodman|Not sure about reordering, new version created by someone on VCF  |
 +|XT-FDC|40|$12|Todd Goodman| ​  |
 +|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​37113829/​index.htm|MSX EPROM Cartridge]]| ​  ​|$5| ​  ​| ​  |
 +|Zeta/​Z80-2-ECB Prototypes|2|$12|Andrew Bingham| ​  |
 +|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​38282303/​95749082/​index.htm|Elm GAL Programmer]]| ​ 2 \\   \\ 8|  5 € \\   \\ 5|  Jordi Solis \\   \\ Phillip Summers| ​ [[http://​elm-chan.org/​works/​pgal/​report_e.html|http://​elm-chan.org/​works/​pgal/​report_e.html]] ​ \\   ​\\ ​ [[http://​www.retrotechnology.com/​herbs_stuff/​gal.html|http://​www.retrotechnology.com/​herbs_stuff/​gal.html]] \\   ​\\ ​ [[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf|https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf]] ​ |
 +|CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board  |
 +|[[:​boards:​other:​idecf2din:​start|CF-IDE daughterboard]] for MPU302|2|$12|Bill Shen|Assembled and tested, CF disk not included. ​ |
 +|[[:​builderpages:​plasmo:​z280rc|Z280RC]],​ Z280 for RC2014|4|$50|Bill Shen|Assembled and tested, include CP2102 USB adapter and 128Meg CF loaded with software ​ |
 +|MC14500 board|7|$5|Richard Edwards|1bit "​CPU"​ board. ​ |
 +|KIM Uno Board only|8|$5US|Michael Cvet.|Kim Uno Board using Arduino see [[http://​obsolescence.wixsite.com/​obsolescence/​kim-uno-get-or-build-one|Tronixlabs ]](you can purchase kits from there also). I only have blank PC boards from an order I placed. Postage FREE to Aust. and US for 1 board. ​ |
 +|SYM-1 Maxi Board|2|$20US|Michael Cvet.|SYM-1 Maxi board, serial clone of SYM-1 board. [[https://​sites.google.com/​site/​gogleoops/​sym-1-maxi|See Old Micros website]]. Postage FREE to Aust and US for 1 board. ​ |
 +|[[https://​hackaday.io/​Just4Fun|uTerm-S]]|4|5AUD|Phil Summers|Just4Fun'​s VT100 VGA Serial terminal ​ |
 +|[[https://​velesoft.speccy.cz/​data-gear.htm|Datagear DMA board]]|4|$3US|Phil Summers|Datagear DMA piggy back board. ​ |
 +
 +===== Chips/​Components =====
 +
 +^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  |
 +|80C188-25 CPU|0|$4|Todd Goodman| ​  |
 +|WD37C65 FDC|   ​|$8| ​  ​| ​  |
 +|NS32202|134|Free with MF/​PIC| ​ Rich Cini or John Coffman| ​  |
 +
 +===== S-100 Bus Boards =====
 +
 +^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes|
 +|Regular Prototyping Board| ​  ​| ​ $20  |   ​| ​  |
 +|Buffered Prototyping Board v3.0a| ​ 20  |  $20  |Todd Goodman ​ |   |
 +| |  4  |  $20  |Jordi Solis  |   |
 +|Buffered Prototyping Board Mini Sea of PTH'​s| ​ 30  |  $25  |Josh Bensadon (in Canada), Todd Goodman (elsewhere)| ​  |
 +|Backplane (9 slot, terminated) - V4|  20  |  $15  |Todd Goodman| ​  |
 +|Backplane (Antony'​s 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman| ​  |
 +|Dual IDE - Version 03a|  20  |  $20  |Todd Goodman ​ |   |
 +|Parallel ASCII Keyboard| ​  ​| ​ $20  |   ​| ​  |
 +|4MB SRAM|  0  |  $20  | |   |
 +|System Monitor Board - V3|  40  |  $20  |Todd Goodman| ​  |
 +|——TIL311 Display Board for SMB|  20  |  $6  |Todd Goodman| ​  |
 +|——LED Bar Display Board for SMB|  20  |  $10  |Todd Goodman| ​  |
 +|——HP5082 Display Board for SMB|  20  |  $10  |Todd Goodman| ​  |
 +|Bus Extender - V2|  20  |  $20  |Todd Goodman| ​  |
 +|RAM & ROM - v2.0b| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Serial I/O v3.1|  20  |  $20  |Todd Goodman ​ |   |
 +|PIC/​RTC| ​  ​| ​ $20  |   ​| ​  |
 +|IMSAI MPU-A CPU Board (8080A) reproduction of original| ​ 20  |  $30  |Gary Kaufman| |
 +|Propeller Based Console I/O - v2.51| ​ 20  |  $20  |Todd Goodman ​ |   |
 +|Altair 8800 CPU Board (8080A) reproduction of original| ​ 30  |  $30  |Gary Kaufman| ​  |
 +|68000/​68010 CPU board v1.03b| ​ 20  |  $20  |Todd Goodman ​ |   |
 +|8086 Master/​Slave CPU Board| ​ 20  |  $20  |Gary Kaufman| ​  |
 +|6502 CPU board| ​ 20  |  $20  |Todd Goodman| ​  |
 +|16MB SRAM - v6.0a| ​ 20  |  $20  |Todd Goodman| ​  |
 +|—- Mezzanine Board for SRAM - V06d|  60  |  $3  |Todd Goodman| ​  |
 +|16MB SRAM - V1|  60  |  $15  |Todd Goodman| ​  |
 +|—-Mezzanine board for SRAM - V06C|  3  |  $1  |Todd Goodman| ​  |
 +|Parallel I/O Board V2|  20  |  $20  |Todd Goodman| ​  |
 +|Bus Terminator| ​ 20  |  $20  |Todd Goodman| ​  |
 +|S-100 PC-AT Ver 02 (DOS Support Board)| ​ 0  |  $15  |Neil Breeden| ​  |
 +|S-100 Front Panel (aka FP Mini)| ​ 4  |  $20  |Don Caprio| ​  |
 +|Front Panel - Full Size (reproduction of a popular classic)| ​ 2  |  ??  |Don Caprio|Looking for Beta tester|
 +|S-100 Bus Breakout Board| ​ 75  |  $5  |Don Caprio|Board In production|
 +|S-100 OPL3 V1|  20  |  $17  |Todd Goodman| ​  |
 +|S-100 V2 MSX2 UTILITY Board| ​ 9  |  15 €  |Jordi Solis|Looking for Beta tester ​ |
 +|Z-80 SBC v1.1a| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Z-80 Master v2.01| ​ 20  |  $20  |Todd Goodman| ​  |
 +|ZFDC v1.0b| ​ 20  |  $20  |Todd Goodman| ​  |
 +|8088 Master v2 (Marked "​Version 01" on silkscreen)| ​ 20  |  $20  |Todd Goodman| ​  |
 +|80286 v2|  20  |  $20  |Todd Goodman| ​  |
 +|80386 v2.31| ​ 20  |  $20  |Todd Goodman| ​  |
 +|32/64MB OTT RAM v3.11b| ​ 20  |  $26  |Todd Goodman| ​  |
 +|PDP11 CPU v2|  20  |  $20  |Todd Goodman| ​  |
 +|PDP11 Support v1.01| ​ 20  |  $20  |Todd Goodman| ​  |
 +|MSDOS Support v3a|  20  |  $20  |Todd Goodman| ​  |
 +|16-bit VGA v15a|  20  |  $20  |Todd Goodman| ​  |
 +|8-bit VGA v11|  20  |  $20  |Todd Goodman| ​  |
 +|Trident Adapter v15a|  20  |  $5  |Todd Goodman| ​  |
 +|Full Size 80486 v15a|  20  |  $36  |Todd Goodman| ​  |
 +|CCS-2422E| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Bus Display| ​ 60  |  $20  |Todd Goodman| ​  |
 +|FPGA v2|  20  |  $32  |Todd Goodman| ​  |
 +|– FPGA Shield #0|  20  |  $8  |Todd Goodman| ​  |
 +|– FPGA Shield #1|  20  |  $8  |Todd Goodman| ​  |
 +|68030 v1.1|  20  |  $20  |Todd Goodman| ​  |
 +|Z-80 FPGA v1.1B| ​ 20  |  $20  |Todd Goodman| ​  |
 +
 +===== ISA Bus Boards =====
 +
 +==== Xi 8088 Project (Sergey Kiselev) ====
 +
 +^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  |
 +|Xi 8088 PCB|20|$25|Todd Goodman| ​  |
 +|ISA Backplane PCB|40|$25|Todd Goodman| ​  |
 +|ISA SVGA v1.1 PCB|40|$10|Todd Goodman| ​  |
 +|XT-CF-Lite PCB|30|$12|Todd Goodman| ​  |
 +|ISA OPL2 PCB|40|$10|Todd Goodman| ​  |
 +|ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  |
 +|Micro 8088 PCB|0|$20|Sergey Kiselev| ​  |
 +|ISA 8-Bit Backplane PCB|0|$10|Sergey Kiselev| ​  |
  
 ===== Other (formerly known as "​Mini"​) Boards ===== ===== Other (formerly known as "​Mini"​) Boards =====
Line 215: Line 437:
 |KIM Uno Board only|8|$5US|Michael Cvet.|Kim Uno Board using Arduino see [[http://​obsolescence.wixsite.com/​obsolescence/​kim-uno-get-or-build-one|Tronixlabs ]](you can purchase kits from there also). I only have blank PC boards from an order I placed. Postage FREE to Aust. and US for 1 board. ​ | |KIM Uno Board only|8|$5US|Michael Cvet.|Kim Uno Board using Arduino see [[http://​obsolescence.wixsite.com/​obsolescence/​kim-uno-get-or-build-one|Tronixlabs ]](you can purchase kits from there also). I only have blank PC boards from an order I placed. Postage FREE to Aust. and US for 1 board. ​ |
 |SYM-1 Maxi Board|2|$20US|Michael Cvet.|SYM-1 Maxi board, serial clone of SYM-1 board. [[https://​sites.google.com/​site/​gogleoops/​sym-1-maxi|See Old Micros website]]. Postage FREE to Aust and US for 1 board. ​ | |SYM-1 Maxi Board|2|$20US|Michael Cvet.|SYM-1 Maxi board, serial clone of SYM-1 board. [[https://​sites.google.com/​site/​gogleoops/​sym-1-maxi|See Old Micros website]]. Postage FREE to Aust and US for 1 board. ​ |
 +|[[https://​hackaday.io/​Just4Fun|uTerm-S]]|4|5AUD|Phil Summers|Just4Fun'​s VT100 VGA Serial terminal ​ |
 +|[[https://​velesoft.speccy.cz/​data-gear.htm|Datagear DMA board]]|4|$3US|Phil Summers|Datagear DMA piggy back board. ​ |
  
-\\+===== Chips/​Components =====
  
 +^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  |
 +|80C188-25 CPU|0|$4|Todd Goodman| ​  |
 +|WD37C65 FDC|   ​|$8| ​  ​| ​  |
 +|NS32202|134|Free with MF/​PIC| ​ Rich Cini or John Coffman| ​  |
 +
 +===== S-100 Bus Boards =====
 +
 +^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes|
 +|Regular Prototyping Board| ​  ​| ​ $20  |   ​| ​  |
 +|Buffered Prototyping Board v3.0a| ​ 20  |  $20  |Todd Goodman ​ |   |
 +| |  4  |  $20  |Jordi Solis  |   |
 +|Buffered Prototyping Board Mini Sea of PTH'​s| ​ 30  |  $25  |Josh Bensadon (in Canada), Todd Goodman (elsewhere)| ​  |
 +|Backplane (9 slot, terminated) - V4|  20  |  $15  |Todd Goodman| ​  |
 +|Backplane (Antony'​s 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman| ​  |
 +|Dual IDE - Version 03a|  20  |  $20  |Todd Goodman ​ |   |
 +|Parallel ASCII Keyboard| ​  ​| ​ $20  |   ​| ​  |
 +|4MB SRAM|  0  |  $20  | |   |
 +|System Monitor Board - V3|  40  |  $20  |Todd Goodman| ​  |
 +|——TIL311 Display Board for SMB|  20  |  $6  |Todd Goodman| ​  |
 +|——LED Bar Display Board for SMB|  20  |  $10  |Todd Goodman| ​  |
 +|——HP5082 Display Board for SMB|  20  |  $10  |Todd Goodman| ​  |
 +|Bus Extender - V2|  20  |  $20  |Todd Goodman| ​  |
 +|RAM & ROM - v2.0b| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Serial I/O v3.1|  20  |  $20  |Todd Goodman ​ |   |
 +|PIC/​RTC| ​  ​| ​ $20  |   ​| ​  |
 +|IMSAI MPU-A CPU Board (8080A) reproduction of original| ​ 20  |  $30  |Gary Kaufman| |
 +|Propeller Based Console I/O - v2.51| ​ 20  |  $20  |Todd Goodman ​ |   |
 +|Altair 8800 CPU Board (8080A) reproduction of original| ​ 30  |  $30  |Gary Kaufman| ​  |
 +|68000/​68010 CPU board v1.03b| ​ 20  |  $20  |Todd Goodman ​ |   |
 +|8086 Master/​Slave CPU Board| ​ 20  |  $20  |Gary Kaufman| ​  |
 +|6502 CPU board| ​ 20  |  $20  |Todd Goodman| ​  |
 +|16MB SRAM - v6.0a| ​ 20  |  $20  |Todd Goodman| ​  |
 +|—- Mezzanine Board for SRAM - V06d|  60  |  $3  |Todd Goodman| ​  |
 +|16MB SRAM - V1|  60  |  $15  |Todd Goodman| ​  |
 +|—-Mezzanine board for SRAM - V06C|  3  |  $1  |Todd Goodman| ​  |
 +|Parallel I/O Board V2|  20  |  $20  |Todd Goodman| ​  |
 +|Bus Terminator| ​ 20  |  $20  |Todd Goodman| ​  |
 +|S-100 PC-AT Ver 02 (DOS Support Board)| ​ 0  |  $15  |Neil Breeden| ​  |
 +|S-100 Front Panel (aka FP Mini)| ​ 4  |  $20  |Don Caprio| ​  |
 +|Front Panel - Full Size (reproduction of a popular classic)| ​ 2  |  ??  |Don Caprio|Looking for Beta tester|
 +|S-100 Bus Breakout Board| ​ 75  |  $5  |Don Caprio|Board In production|
 +|S-100 OPL3 V1|  20  |  $17  |Todd Goodman| ​  |
 +|S-100 V2 MSX2 UTILITY Board| ​ 9  |  15 €  |Jordi Solis|Looking for Beta tester ​ |
 +|Z-80 SBC v1.1a| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Z-80 Master v2.01| ​ 20  |  $20  |Todd Goodman| ​  |
 +|ZFDC v1.0b| ​ 20  |  $20  |Todd Goodman| ​  |
 +|8088 Master v2 (Marked "​Version 01" on silkscreen)| ​ 20  |  $20  |Todd Goodman| ​  |
 +|80286 v2|  20  |  $20  |Todd Goodman| ​  |
 +|80386 v2.31| ​ 20  |  $20  |Todd Goodman| ​  |
 +|32/64MB OTT RAM v3.11b| ​ 20  |  $26  |Todd Goodman| ​  |
 +|PDP11 CPU v2|  20  |  $20  |Todd Goodman| ​  |
 +|PDP11 Support v1.01| ​ 20  |  $20  |Todd Goodman| ​  |
 +|MSDOS Support v3a|  20  |  $20  |Todd Goodman| ​  |
 +|16-bit VGA v15a|  20  |  $20  |Todd Goodman| ​  |
 +|8-bit VGA v11|  20  |  $20  |Todd Goodman| ​  |
 +|Trident Adapter v15a|  20  |  $5  |Todd Goodman| ​  |
 +|Full Size 80486 v15a|  20  |  $36  |Todd Goodman| ​  |
 +|CCS-2422E| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Bus Display| ​ 60  |  $20  |Todd Goodman| ​  |
 +|FPGA v2|  20  |  $32  |Todd Goodman| ​  |
 +|– FPGA Shield #0|  20  |  $8  |Todd Goodman| ​  |
 +|– FPGA Shield #1|  20  |  $8  |Todd Goodman| ​  |
 +|68030 v1.1|  20  |  $20  |Todd Goodman| ​  |
 +|Z-80 FPGA v1.1B| ​ 20  |  $20  |Todd Goodman| ​  |
 +
 +===== ISA Bus Boards =====
 +
 +==== Xi 8088 Project (Sergey Kiselev) ====
 +
 +^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  |
 +|Xi 8088 PCB|20|$25|Todd Goodman| ​  |
 +|ISA Backplane PCB|40|$25|Todd Goodman| ​  |
 +|ISA SVGA v1.1 PCB|40|$10|Todd Goodman| ​  |
 +|XT-CF-Lite PCB|30|$12|Todd Goodman| ​  |
 +|ISA OPL2 PCB|40|$10|Todd Goodman| ​  |
 +|ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  |
 +|Micro 8088 PCB|0|$20|Sergey Kiselev| ​  |
 +|ISA 8-Bit Backplane PCB|0|$10|Sergey Kiselev| ​  |
 +
 +===== Other (formerly known as "​Mini"​) Boards =====
 +
 +^  **Board / Component** ​   ^  **Stock** ​   ^  **Price** ​   ^  **Order Contact** ​   ^  **Notes** ​   |
 +|[[:​boards:​other:​ppide|PPIDE]]| ​  | |   ​| ​  |
 +|PPISD|20|$5|Todd Goodman| ​  |
 +|AT2XTKBD|20|$5|Todd Goodman| |
 +|ECB to Z80 Socket Adapters| ​  ​|$5| ​  ​| ​  |
 +|Juha SD|   ​|$5| ​  ​| ​  |
 +|SCSI2IDEv2|40|$10|Todd Goodman| ​  |
 +|XT-IDE (ISA Bus)|0|$12|Todd Goodman|Not sure about reordering, new version created by someone on VCF  |
 +|XT-FDC|40|$12|Todd Goodman| ​  |
 +|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​37113829/​index.htm|MSX EPROM Cartridge]]| ​  ​|$5| ​  ​| ​  |
 +|Zeta/​Z80-2-ECB Prototypes|2|$12|Andrew Bingham| ​  |
 +|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​38282303/​95749082/​index.htm|Elm GAL Programmer]]| ​ 2 \\   \\ 8|  5 € \\   \\ 5|  Jordi Solis \\   \\ Phillip Summers| ​ [[http://​elm-chan.org/​works/​pgal/​report_e.html|http://​elm-chan.org/​works/​pgal/​report_e.html]] ​ \\   ​\\ ​ [[http://​www.retrotechnology.com/​herbs_stuff/​gal.html|http://​www.retrotechnology.com/​herbs_stuff/​gal.html]] \\   ​\\ ​ [[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf|https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf]] ​ |
 +|CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board  |
 +|[[:​boards:​other:​idecf2din:​start|CF-IDE daughterboard]] for MPU302|2|$12|Bill Shen|Assembled and tested, CF disk not included. ​ |
 +|[[:​builderpages:​plasmo:​z280rc|Z280RC]],​ Z280 for RC2014|4|$50|Bill Shen|Assembled and tested, include CP2102 USB adapter and 128Meg CF loaded with software ​ |
 +|MC14500 board|7|$5|Richard Edwards|1bit "​CPU"​ board. ​ |
 +|KIM Uno Board only|8|$5US|Michael Cvet.|Kim Uno Board using Arduino see [[http://​obsolescence.wixsite.com/​obsolescence/​kim-uno-get-or-build-one|Tronixlabs ]](you can purchase kits from there also). I only have blank PC boards from an order I placed. Postage FREE to Aust. and US for 1 board. ​ |
 +|SYM-1 Maxi Board|2|$20US|Michael Cvet.|SYM-1 Maxi board, serial clone of SYM-1 board. [[https://​sites.google.com/​site/​gogleoops/​sym-1-maxi|See Old Micros website]]. Postage FREE to Aust and US for 1 board. ​ |
 +|[[https://​hackaday.io/​Just4Fun|uTerm-S]]|4|5AUD|Phil Summers|Just4Fun'​s VT100 VGA Serial terminal ​ |
 +|[[https://​velesoft.speccy.cz/​data-gear.htm|Datagear DMA board]]|4|$3US|Phil Summers|Datagear DMA piggy back board. ​ |
  
 ===== Chips/​Components ===== ===== Chips/​Components =====
Line 231: Line 556:
 |Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| | |Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| |
 |Rich Cini|rich.cini <at> gmail.com| |29 July 2014| | |Rich Cini|rich.cini <at> gmail.com| |29 July 2014| |
-|John Coffman|johninsd <at> gmail <dot> com|USA|07 Feb 2019|jcoffman| +|John Coffman|johninsd <at> gmail <dot> com|USA|12 May 2020|jcoffman| 
-|Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com| |18 Mar 2017| |+|Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com|USA|18 Mar 2017|tgoodman|
 |Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| | |Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| |
 |Sergey Kiselev|skiselev:​gmail/​com (replace ':'​ with '​@'​ and '/'​ with '​.'​)| |28 Jul 2015| | |Sergey Kiselev|skiselev:​gmail/​com (replace ':'​ with '​@'​ and '/'​ with '​.'​)| |28 Jul 2015| |
 |Ed Snider|zippster278 <at> gmail.com| |13 Mar 2018| | |Ed Snider|zippster278 <at> gmail.com| |13 Mar 2018| |
 |Will Sowerbutts|will <at> sowerbutts.com|UK|22 July 2017| | |Will Sowerbutts|will <at> sowerbutts.com|UK|22 July 2017| |
-|Wayne Warthen|wwarthen <at> gmail.com| |3 Sep 2015| |+|Wayne Warthen|wwarthen <at> gmail.com|USA|3 Sep 2015|wwarthen|
 |Neil Breeden|nbreeden <at> me.com| |23 May 2014| | |Neil Breeden|nbreeden <at> me.com| |23 May 2014| |
 |Don Caprio|ilvunix <at> gmail.com| |05 Oct 2014| | |Don Caprio|ilvunix <at> gmail.com| |05 Oct 2014| |
 |Ewout Ros|ewout.ros <at> gmail.com| |19 Feb 2017| | |Ewout Ros|ewout.ros <at> gmail.com| |19 Feb 2017| |
-|Richard Edwards|ecb <at> trick-1 <dot> net|Aust.|5 Jul 2017| |+|Richard Edwards|ecb <at> trick-1 <dot> net|Aust.|29 Aug 2019|trick-1|
 |Jordi Solís|jordi.solism <at> gmail <dot> com|Spain|20 Aug 2017| | |Jordi Solís|jordi.solism <at> gmail <dot> com|Spain|20 Aug 2017| |
 |Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017| | |Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017| |
 |Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017| | |Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017| |
-|Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aust.|13 Aug 2019|[[:​builderpages:​b1ackmai1er:​start|b1ackmai1er]]|+|Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aust.|10 Feb 2020|[[:​builderpages:​b1ackmai1er:​start|b1ackmai1er]]|
 |Doug Gabbard|doug <at> retrodepot <dot> net|USA|15 Apr 2019|jdgabbard| |Doug Gabbard|doug <at> retrodepot <dot> net|USA|15 Apr 2019|jdgabbard|
 |Rienk Koolstra|rkstar42 <at> gmail <dot> com|NL|13 Oct 2018| | |Rienk Koolstra|rkstar42 <at> gmail <dot> com|NL|13 Oct 2018| |
 |Michael Cvetanovski|michael.cvet <at> gmail <dot> com|Aust|16 Nov 2018| | |Michael Cvetanovski|michael.cvet <at> gmail <dot> com|Aust|16 Nov 2018| |
 +|Craig Andrews|craig.andrews <at> tessol - inc <dot> com|USA|19 Mar 2020|Craig|
  
 =====   ===== =====   =====
boardinventory.1566732052.txt.gz · Last modified: 2019/08/25 07:20 by b1ackmai1er
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0