Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
boardinventory [2020/03/27 01:52]
craig [SBC-85] qty update
boardinventory [2020/07/03 07:54] (current)
tgoodman [S-100 Bus Boards]
Line 4: Line 4:
  
 Note that these boards are being created/​ordered by hobbyists and distributed to other hobbyists, without any warranty expressed or implied by the operator of the RBC wiki. Note that these boards are being created/​ordered by hobbyists and distributed to other hobbyists, without any warranty expressed or implied by the operator of the RBC wiki.
- 
  
 ===== Single Board Computer Boards ===== ===== Single Board Computer Boards =====
Line 11: Line 10:
  
 ^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes| ^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes|
-|Zeta SBC PCB|  10  |  $15  |Todd Goodman| ​  | +|Zeta SBC PCB|  10  |  $ |Todd Goodman| ​  | 
-|Zeta SBC V2 PCB|  20  |  $20  |Todd Goodman| | +|Zeta SBC V2 PCB|  20  |  $10  |Todd Goodman| | 
-|ParPortProp PCB|  20  |  $20  |Todd Goodman| |+|ParPortProp PCB|  20  |  $10  |Todd Goodman| |
 |SST39SF040 (512 KiB Flash)| ​ 8  |  $4  |Sergey Kiselev|Can be preprogrammed with the firmware of your choice| |SST39SF040 (512 KiB Flash)| ​ 8  |  $4  |Sergey Kiselev|Can be preprogrammed with the firmware of your choice|
  
Line 22: Line 21:
 |[[https://​github.com/​skiselev/​omega/​blob/​master/​Mainboard.md|Omega Main Board PCB Version 1.2]]| ​ 8  |  $20  |Sergey Kiselev| ​  | |[[https://​github.com/​skiselev/​omega/​blob/​master/​Mainboard.md|Omega Main Board PCB Version 1.2]]| ​ 8  |  $20  |Sergey Kiselev| ​  |
 |MSX interface cards| ​  ​| ​  | |   | |MSX interface cards| ​  ​| ​  | |   |
-|[[http://​obsonet.blogspot.com/​|Obsonet network card v1.0]]|  ​ ​| ​ $ ​|Jordi Solis| ​  | +|[[http://​obsonet.blogspot.com/​|Obsonet network card v1.0]]|  ​12  ​| ​ $10  ​|Jordi Solis| ​  | 
-|[[https://​github.com/​costarc/​MSXPi|MSX-Pi v0.7]]|  ​ ​| ​ $10  |Jordi Solis| ​  | +|[[https://​github.com/​costarc/​MSXPi|MSX-Pi v0.7]]|  ​ ​| ​ $10  |Jordi Solis| ​  | 
-|[[https://​github.com/​Wierzbowsky/​MSX_Breadboard_Large|MSX prototype board]]|  ​ ​| ​ $10  |Jordi Solis| ​  |+|[[https://​github.com/​Wierzbowsky/​MSX_Breadboard_Large|MSX prototype board]]|  ​ ​| ​ $10  ​|Jordi Solis| ​  | 
 +|[[https://​github.com/​RBSC/​F4-FMPAC|F4-FMPAC module board]]| ​ 5  |  $5  ​|Jordi Solis| ​  |
  
 ==== Minimal 8085/Z80 Single Board Computer ==== ==== Minimal 8085/Z80 Single Board Computer ====
Line 31: Line 31:
 |[[:​boards:​sbc:​minimax8085:​start|MiniMax8085]][[:​boards:​sbc:​minimax8085:​start| PCB]]| ​ 5  |  $5 USD  |Phillip Summers ​ |   | |[[:​boards:​sbc:​minimax8085:​start|MiniMax8085]][[:​boards:​sbc:​minimax8085:​start| PCB]]| ​ 5  |  $5 USD  |Phillip Summers ​ |   |
 |[[:​builderpages:​rhkoolstar:​sbc-2g-512|]] ​ |  2  |  $5 USD  |Phillip Summers|Rienk Koolstra'​s Z80 SBC inspired by Grant Searle'​s 9 chip breadboard design. ​ | |[[:​builderpages:​rhkoolstar:​sbc-2g-512|]] ​ |  2  |  $5 USD  |Phillip Summers|Rienk Koolstra'​s Z80 SBC inspired by Grant Searle'​s 9 chip breadboard design. ​ |
-|   ​|  ​ ​| ​ $5  |Rienk Koolstra ​ |price includes shipping ​ |+|   ​|  ​ ​| ​ $5  |Rienk Koolstra ​ |price includes shipping ​ |
 |[[https://​github.com/​skiselev/​easy_z80|Easy Z80 V1.1 PCB]]  |2  |$5  |Sergey Kiselev ​ |   | |[[https://​github.com/​skiselev/​easy_z80|Easy Z80 V1.1 PCB]]  |2  |$5  |Sergey Kiselev ​ |   |
 |[[https://​hackaday.io/​project/​168014-rc-z8basic|RC-Z8BASIC]] ​ |3  |$5 USD  |Phillip Summers ​ |Just4Fun'​s [[https://​www.retrobrewcomputers.org/​forum/​index.php?​t=msg&​th=404&​start=0&​|Z8671 ]]based board. ​ | |[[https://​hackaday.io/​project/​168014-rc-z8basic|RC-Z8BASIC]] ​ |3  |$5 USD  |Phillip Summers ​ |Just4Fun'​s [[https://​www.retrobrewcomputers.org/​forum/​index.php?​t=msg&​th=404&​start=0&​|Z8671 ]]based board. ​ |
 +|[[:​builderpages:​plasmo:​zrcc:​zrcc1_1|ZRCC]] Kit, rev1.1 ​ |5  |20 USD|Bill Shen|22MHz CP/M-ready Z80 SBC, 64meg CF disk included. Shipping is 5 USD in USA only.|
 +|  [[:​builderpages:​plasmo:​zrcc:​zrcc1|ZRCC rev1.1]] ​ Assembled, tested ​ |2  |45 USD|Bill Shen|Assembled and tested 22MHz CP/M-ready Z80 SBC, 64meg CF disk included. Shipping is 5 USD in USA only.|
  
 ==== MPU302, Repurposed Soneplex SPX-MPU board for CP/M-68K ==== ==== MPU302, Repurposed Soneplex SPX-MPU board for CP/M-68K ====
Line 39: Line 41:
 ^**Board** ^**Stock** ^**Price** ^**Order Contact** ^**Notes** | ^**Board** ^**Stock** ^**Price** ^**Order Contact** ^**Notes** |
 |[[:​boards:​sbc:​mpu302|MPU302]]|1|$50|Bill Shen|Pre-programmed and tested with CP/M 68K ver 1.3. Board ready to run.| |[[:​boards:​sbc:​mpu302|MPU302]]|1|$50|Bill Shen|Pre-programmed and tested with CP/M 68K ver 1.3. Board ready to run.|
 +
 +==== CB030, 68030 SBC, 16 Meg Memory, CP/M 68K Ready ====
 +
 +^Board^Stock^Price^Order Contact^Notes|
 +|CB030 Partially assembled|3|$15|Bill Shen|PC board with all SMT components soldered, EPM7128S is soldered and programmed|
 +|[[:​builderpages:​plasmo:​cb030:​cb030_rev1:​pictorial_guide|CB030]] Kit|2|$55|Bill Shen|PC board with all SMT components soldered, remaining DIP components and sockets in kit. 256meg CF disk included as well as an USB-to-serial adapter.|
 +|[[:​builderpages:​plasmo:​cb030:​cb030_rev1|CB030]] Assembled|2|$75|Bill Shen|Fully assembled and tested CB030 include a 256 meg CF disk and an USB-to-serial adapter.|
  
 ==== Tiny68K, Rev2, 68000 SBC, 16 Meg Memory, CP/M 68K Ready ==== ==== Tiny68K, Rev2, 68000 SBC, 16 Meg Memory, CP/M 68K Ready ====
Line 56: Line 65:
  
 ^Board^Stock^Price Currency^Order Contact^Notes| ^Board^Stock^Price Currency^Order Contact^Notes|
-|[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cpmega88.jpg|CP/​Mega88]] ​ |  ​11  ​| ​ $2  |Rienk Koolstra ​ |AVR implementation of Takashi Toyoshima'​s CP/Mega88 in SMD \\ price includes shipping - see [[:​builderpages:​rhkoolstar:​start|main page]] ​ |+|[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cpmega88.jpg|CP/​Mega88]] ​ |  ​ ​| ​ $2  |Rienk Koolstra ​ |AVR implementation of Takashi Toyoshima'​s CP/Mega88 in SMD \\ price includes shipping - see [[:​builderpages:​rhkoolstar:​start|main page]] ​ |
  
 ==== SBC-85 ==== ==== SBC-85 ====
Line 62: Line 71:
 ^**Board** ^**Stock** ^**Price** ^**Location** ^**Order Contact** ^**Notes** | ^**Board** ^**Stock** ^**Price** ^**Location** ^**Order Contact** ^**Notes** |
 |**ASSEMBLED** | | | | | | |**ASSEMBLED** | | | | | |
-|SBC CPU v1.0 Assembled|1|$50|USA|Craig Andrews| | +|SBC CPU v2.0 Assembled|1|$75|USA|Craig Andrews| | 
-|SBC CPU v1.1 Assembled|1|$55|USA|Craig Andrews| |+| | | | | | |
 |**BARE BOARDS** | | | | | | |**BARE BOARDS** | | | | | |
-|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cpu-v1-1-1-2-documentation/​|SBC CPU v1.-Tin Fingers]]|4|$2.50|USA|Craig Andrews| | +|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cpu-v1-1-1-2-documentation/​|SBC CPU v2.-Tin Fingers]]|2|$5|USA|Craig Andrews| | 
-|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cpu-v1-1-1-2-documentation/​|SBC CPU v1.- Gold Fingers]]|9|$5|USA|Craig Andrews| | +|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cpu-v1-1-1-2-documentation/​|SBC CPU v2.- Gold Fingers]]|0|$8|USA|Craig Andrews| | 
-|[[http://​sbc-85.com/​index.php/​documentation/​backplane-4-documentation/​|Backplane-4 v1.0]]|9|$2.50|USA|Craig Andrews| | +|[[http://​sbc-85.com/​index.php/​documentation/​backplane-4-documentation/​|Backplane-4 v1.0]]|1|$5|USA|Craig Andrews| | 
-|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cassette-tape-interface-documentation/​|Cassette Interface v1.0]]|3|$2.50|USA|Craig Andrews| | +|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cassette-tape-interface-documentation/​|Cassette Interface v1.0]]|3|$3|USA|Craig Andrews| | 
-|[[http://sbc-85.com/index.php/documentation/​bus-monitor-supreme-documentation/​|Bus Monitor Supreme v1.1]]|0|$5|USA|Craig Andrews| | +|[[https://hackaday.io/project/170832-magnetic-bubble-memory-makes-a-comeback|Bus Monitor Supreme v1.1b]]|0|$5|USA|Craig Andrews|May contain undiscovered bugs so it is still considered to be a prototype| 
-|Protoboard v1.0|3|$2.50|USA|Craig Andrews| |+|[[https://​hackaday.io/​project/​170832-magnetic-bubble-memory-makes-a-comeback|1Mbit 7110A Bubble]]|2|$10|USA|Craig Andrews|May contain undiscovered bugs so it is still considered to be a prototype
 +|Protoboard v1.0d|5|$3|USA|Craig Andrews| |
  
 \\ \\
Line 83: Line 93:
 |[[:​boards:​ecb:​propio:​start|Prop I/O V2]]|  4  |  $20  |Wayne Warthen| | |[[:​boards:​ecb:​propio:​start|Prop I/O V2]]|  4  |  $20  |Wayne Warthen| |
 | |  3  |  $15  |Jordi Solis| | | |  3  |  $15  |Jordi Solis| |
-|[[:​boards:​ecb:​backplane-8:​start|ECB Backplane (8 slot)]]|  ​11  ​| ​ 20 USD  |John Coffman|167mm version, 1/8" thickness|+|[[:​boards:​ecb:​backplane-8:​start|ECB Backplane (8 slot)]]|  ​ ​| ​ 20 USD  |John Coffman|167mm version, 1/8" thickness|
 |   ​| ​ 27  |   |Rich Cini  |co-stocked for mini-68k ​ | |   ​| ​ 27  |   |Rich Cini  |co-stocked for mini-68k ​ |
 |[[:​boards:​ecb:​backplane-3:​start|ECB Mini Backplane (3 slot)]]| ​ 50  |  $5  |Will Sowerbutts|New stock November 2018: 1.6mm, HASL lead solder finish.| |[[:​boards:​ecb:​backplane-3:​start|ECB Mini Backplane (3 slot)]]| ​ 50  |  $5  |Will Sowerbutts|New stock November 2018: 1.6mm, HASL lead solder finish.|
Line 90: Line 100:
 |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003A]]| ​ 4  |  $10 USD  |Phil Summers| ​  \\ Includes the Kontron reset correction.| |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003A]]| ​ 4  |  $10 USD  |Phil Summers| ​  \\ Includes the Kontron reset correction.|
 |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003]] ​ |  2  |  $15  |Jordi Solis  |   | |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003]] ​ |  2  |  $15  |Jordi Solis  |   |
-|[[:​boards:​sbc:​sbc-188:​start|SBC-188 v3]]  |  ​ ​| ​ $25  |John Coffman ​ |4-layer 25mhz respin of the SBC-188 ups memory to 1Mb & adds PPIDE connector. This board is hosted at "​PCBway.com",​ and those outside of the USA are encouraged to order & host the board in their locale. ​ |+|[[:​boards:​sbc:​sbc-188:​start|SBC-188 v3]]  |  ​ ​| ​ $25  |John Coffman ​ |4-layer 25mhz respin of the SBC-188 ups memory to 1Mb & adds PPIDE connector. This board is hosted at "​PCBway.com",​ and those outside of the USA are encouraged to order & host the board in their locale.  | 
 +|[[:​boards:​sbc:​sbc-188:​start|SBC-188 v3]]  |  9  |  $25  |Richard Edwards ​ |Australia based stock of SBC-188 v3 board. ​ | 
 +|[[:​boards:​sbc:​ns32000|SBC NS32000]] ​ |  9  |  $20  |John Coffman ​ |Board is hosted at PCBway.com in China.  |
 |  4MEM  |   ​| ​  ​| ​  ​| ​  | |  4MEM  |   ​| ​  ​| ​  ​| ​  |
 |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  4  |  $15  |Ewout Ros  |   | |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  4  |  $15  |Ewout Ros  |   |
Line 115: Line 127:
 |[[:​boards:​ecb:​mini-68k:​start|ECB Mini-68K]] ​ |  26  |  $20  |Rich Cini  |v2.0-007; requires MF/PIC board to operate. ​ | |[[:​boards:​ecb:​mini-68k:​start|ECB Mini-68K]] ​ |  26  |  $20  |Rich Cini  |v2.0-007; requires MF/PIC board to operate. ​ |
 |[[:​boards:​ecb:​cvdu:​start|ColorVDU V2]]  |  8  |  $20  |Wayne Warthen ​ |   | |[[:​boards:​ecb:​cvdu:​start|ColorVDU V2]]  |  8  |  $20  |Wayne Warthen ​ |   |
-|[[:​boards:​ecb:​vga3:​vga3|ECB VGA3]] ​ |  ​10  ​| ​ $25  |John Coffman ​ |4-layer ​board. ​ |+|[[:​boards:​ecb:​vga3:​vga3|ECB VGA3]] ​ |  ​ ​| ​ $25  |John Coffman ​ |4-layer ​board. ​ |
 |[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]] ​ |  20  |  $20  |Todd Goodman ​ |   | |[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]] ​ |  20  |  $20  |Todd Goodman ​ |   |
 |[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]] ​ |  12  |  $20  |John Coffman ​ |   | |[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]] ​ |  12  |  $20  |John Coffman ​ |   |
Line 139: Line 151:
 |Backplane (Antony'​s 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman| ​  | |Backplane (Antony'​s 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman| ​  |
 |Dual IDE - Version 03a|  20  |  $20  |Todd Goodman ​ |   | |Dual IDE - Version 03a|  20  |  $20  |Todd Goodman ​ |   |
-|Parallel ASCII Keyboard| ​  ​|  $20  |   ​|   | +|[[http://​www.s100computers.com/​My%20System%20Pages/​IBM%20Keyboard/​IBM%20Keyboard.htm|Parallel ASCII Keyboard ​v02]] ​20  ​|  $20  |Todd Goodman|   | 
-|4MB SRAM|  ​ ​| ​ $20  | |   |+|[[http://​www.s100computers.com/​My%20System%20Pages/​4MG%20Static%20RAM%20Board/​4MG_RAM%20Board.htm|4MB SRAM v01]]|  ​30  ​| ​ $20  |Todd Goodman|   |
 |System Monitor Board - V3|  40  |  $20  |Todd Goodman| ​  | |System Monitor Board - V3|  40  |  $20  |Todd Goodman| ​  |
 |——TIL311 Display Board for SMB|  20  |  $6  |Todd Goodman| ​  | |——TIL311 Display Board for SMB|  20  |  $6  |Todd Goodman| ​  |
Line 188: Line 200:
 |68030 v1.1|  20  |  $20  |Todd Goodman| ​  | |68030 v1.1|  20  |  $20  |Todd Goodman| ​  |
 |Z-80 FPGA v1.1B| ​ 20  |  $20  |Todd Goodman| ​  | |Z-80 FPGA v1.1B| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Mega 328-2560 v1.11| ​ 20  |  $20  |Todd Goodman| ​  |
 +
 +\\
 +
  
 ===== ISA Bus Boards ===== ===== ISA Bus Boards =====
Line 195: Line 211:
 ^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  | ^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  |
 |Xi 8088 PCB|20|$25|Todd Goodman| ​  | |Xi 8088 PCB|20|$25|Todd Goodman| ​  |
-|ISA Backplane PCB|40|$25|Todd Goodman| ​  |+|ISA Backplane PCB|40|$15|Todd Goodman| ​  |
 |ISA SVGA v1.1 PCB|40|$10|Todd Goodman| ​  | |ISA SVGA v1.1 PCB|40|$10|Todd Goodman| ​  |
 |XT-CF-Lite PCB|30|$12|Todd Goodman| ​  | |XT-CF-Lite PCB|30|$12|Todd Goodman| ​  |
 |ISA OPL2 PCB|40|$10|Todd Goodman| ​  | |ISA OPL2 PCB|40|$10|Todd Goodman| ​  |
 |ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  | |ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  |
-|Micro 8088 PCB|0|$20|Sergey Kiselev|   | +|Micro 8088 PCB|20|$20|Todd Goodman|   | 
-|ISA 8-Bit Backplane PCB|0|$10|Sergey Kiselev|   |+|ISA 8-Bit Backplane PCB|20|$15|Todd Goodman|   |
  
 ===== Other (formerly known as "​Mini"​) Boards ===== ===== Other (formerly known as "​Mini"​) Boards =====
Line 226: Line 242:
 |[[https://​velesoft.speccy.cz/​data-gear.htm|Datagear DMA board]]|4|$3US|Phil Summers|Datagear DMA piggy back board. ​ | |[[https://​velesoft.speccy.cz/​data-gear.htm|Datagear DMA board]]|4|$3US|Phil Summers|Datagear DMA piggy back board. ​ |
  
-===== Chips/​Components =====+==== DEC (Digital) Boards (Joerg Hoppe) ​====
  
 ^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  | ^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  |
-|80C188-25 CPU|0|$4|Todd Goodman| ​  | +|[[http://retrocmp.com/​projects/​unibone|UniBone PCB]]|20|$60|Todd Goodman| ​  | 
-|WD37C65 FDC|   ​|$8| ​  ​| ​  | +|[[http://​retrocmp.com/​projects/​unibone/​275-unibone-as-disk-emulator|UniBone I2C PCB]]|20|$10|Todd Goodman| ​  | 
-|NS32202|134|Free with MF/PIC|  Rich Cini or John Coffman| ​  | +|[[http://retrocmp.com/tools/​uniprobe|UniProbe PCB]]|20|$40|Todd Goodman| ​  | 
- +|[[http://retrocmp.com/tools/dec-km11-maintenance-panel|KM11 Maintenance Panel PCB]]|20|$15|Todd Goodman| ​  | 
-===== S-100 Bus Boards ===== +|[[http://​retrocmp.com/​tools/​unibus-spc-g7273-diagnostics|G7273 Diagnostics/Grant Continuity PCB]]|20|$20|Todd Goodman| ​  | 
- +|[[http://​retrocmp.com/​tools/​dec-flip-chip-extenders|DEC Flip-Chip Extender ​Single PCB]]|20|$18|Todd Goodman| ​  | 
-^Board ​Component^ ​ Stock  ^  Price  ^Order Contact^Notes| +|[[http://​retrocmp.com/​tools/​dec-flip-chip-extenders|DEC Flip-Chip Extender ​Single +5 PCB]]|20|$18|Todd Goodman| ​  | 
-|Regular Prototyping Board| ​  ​| ​ $20  |   ​| ​  | +|[[http://​retrocmp.com/tools/dec-flip-chip-extenders|DEC Flip-Chip Extender ​Dual PCB]]|20|$25|Todd Goodman| ​  | 
-|Buffered Prototyping Board v3.0a ​20  ​ $20  |Todd Goodman ​ |   | +|[[http://​retrocmp.com/​tools/​dec-flip-chip-extenders|DEC Flip-Chip Extender - Dual +5 PCB]]|20|$25|Todd Goodman| ​  | 
-| |  4  |  ​$20  ​|Jordi Solis  |   | +|[[http://retrocmp.com/tools/dec-flip-chip-extenders|DEC Flip-Chip Extender - Quad PCB]]|20|$35|Todd Goodman|   | 
-|Buffered Prototyping Board Mini Sea of PTH'​s| ​ 30  |  $25  |Josh Bensadon (in Canada), ​Todd Goodman ​(elsewhere)|   | +|[[http://retrocmp.com/tools/dec-flip-chip-extenders|DEC Flip-Chip Extender - Quad +5 PCB]]|20|$35|Todd Goodman|   | 
-|Backplane (9 slot, terminated) ​V4|  20  |  $15  |Todd Goodman| ​  | +|[[http://retrocmp.com/tools/dec-flip-chip-extenders|DEC Flip-Chip Extender ​Hex PCB]]|20|$42|Todd Goodman  ​
-|Backplane (Antony'​s 18 slot, terminated) ​V2|  20  |  $32  |Todd Goodman| ​  | +|[[http://retrocmp.com/tools/dec-flip-chip-extenders|DEC Flip-Chip Extender ​Hex +5 PCB]]|20|$42|Todd Goodman  ​| 
-|Dual IDE Version 03a|  20  |  $20  |Todd Goodman ​ |   | +|--Connectors for Flip-Chip Extenders ​ECS PN 2418-13-30 2400 Series Edge Card Connector ​-  ​18 contact pairs, ​.465 tail length, 30u Au|300|$10|Todd Goodman  ​|
-|Parallel ASCII Keyboard| ​  ​| ​ $20  |   ​| ​  | +
-|4MB SRAM|  0  |  $20  | |   | +
-|System Monitor Board V3 ​40  ​ $20  |Todd Goodman| ​  | +
-|——TIL311 Display Board for SMB|  20  |  $6  |Todd Goodman| ​  | +
-|——LED Bar Display Board for SMB|  20  |  ​$10  |Todd Goodman| ​  | +
-|——HP5082 Display Board for SMB|  20  |  $10  |Todd Goodman| ​  | +
-|Bus Extender - V2|  20  |  $20  |Todd Goodman| ​  | +
-|RAM & ROM - v2.0b| ​ 20  |  $20  |Todd Goodman| ​  | +
-|Serial I/O v3.1|  20  |  $20  |Todd Goodman ​ |   | +
-|PIC/RTC  ​ $20    |   | +
-|IMSAI MPU-A CPU Board (8080A) reproduction of original| ​ 20  |  ​$30  |Gary Kaufman| | +
-|Propeller Based Console I/O - v2.51| ​ 20  |  $20  ​|Todd Goodman ​ |   | +
-|Altair 8800 CPU Board (8080A) reproduction of original| ​ 30  |  $30  |Gary Kaufman| ​  | +
-|68000/68010 CPU board v1.03b|  20  |  $20  |Todd Goodman ​ |   | +
-|8086 Master/Slave CPU Board| ​ 20  |  $20  |Gary Kaufman| ​  | +
-|6502 CPU board| ​ 20  |  $20  |Todd Goodman| ​  | +
-|16MB SRAM v6.0a| ​ 20  |  $20  |Todd Goodman| ​  | +
-|—Mezzanine Board for SRAM V06d ​60  ​ ​$3  ​|Todd Goodman| ​  | +
-|16MB SRAM - V1|  60  |  ​$15  |Todd Goodman| ​  | +
-|-Mezzanine board for SRAM V06C ​3 ​ |  $1  |Todd Goodman| ​  | +
-|Parallel I/O Board V2 20   $20  |Todd Goodman| ​  | +
-|Bus Terminator| ​ 20  |  $20  |Todd Goodman| ​  | +
-|S-100 PC-AT Ver 02 (DOS Support Board)| ​ 0  |  $15  |Neil Breeden| ​  | +
-|S-100 Front Panel (aka FP Mini) ​4 ​ |  $20  |Don Caprio| ​  | +
-|Front Panel Full Size (reproduction of a popular classic)| ​ 2  |  ??  |Don Caprio|Looking for Beta tester| +
-|S-100 Bus Breakout Board ​75 ​ |  $5  |Don Caprio|Board In production| +
-|S-100 OPL3 V1|  ​20   $17  ​|Todd Goodman| ​  | +
-|S-100 V2 MSX2 UTILITY Board ​9 ​ |  15 €  |Jordi Solis|Looking for Beta tester ​ | +
-|Z-80 SBC v1.1a| ​ 20  |  $20  |Todd Goodman| ​  | +
-|Z-80 Master v2.01 20   $20  ​|Todd Goodman| ​  | +
-|ZFDC v1.0b|  20  |  $20  |Todd Goodman| ​  | +
-|8088 Master v2 (Marked "​Version 01" on silkscreen)| ​ 20  |  $20  |Todd Goodman| ​  | +
-|80286 v2|  20  |  $20  |Todd Goodman| ​  | +
-|80386 v2.31| ​ 20  |  $20  |Todd Goodman| ​  | +
-|32/64MB OTT RAM v3.11b| ​ 20  |  $26  |Todd Goodman| ​  | +
-|PDP11 CPU v2|  20  |  $20  |Todd Goodman| ​  | +
-|PDP11 Support v1.01| ​ 20  |  $20  |Todd Goodman| ​  | +
-|MSDOS Support v3a|  20  |  $20  |Todd Goodman| ​  | +
-|16-bit VGA v15a|  20  |  $20  |Todd Goodman| ​  | +
-|8-bit VGA v11 ​20 ​ |  $20  |Todd Goodman| ​  | +
-|Trident Adapter v15a|  20  |  $5  |Todd Goodman| ​  | +
-|Full Size 80486 v15a|  20  |  $36  |Todd Goodman| ​  | +
-|CCS-2422E| ​ 20  |  $20  |Todd Goodman| ​  | +
-|Bus Display| ​ 60  |  $20  |Todd Goodman| ​  | +
-|FPGA v2|  20  |  $32  |Todd Goodman| ​  | +
-|– FPGA Shield #0|  20  |  $8  |Todd Goodman| ​  | +
-|– FPGA Shield #1|  20  |  $8  |Todd Goodman| ​  | +
-|68030 v1.1|  20  |  $20  |Todd Goodman| ​  | +
-|Z-80 FPGA v1.1B| ​ 20  |  $20  |Todd Goodman| ​  | +
- +
-===== ISA Bus Boards ===== +
- +
-==== Xi 8088 Project (Sergey Kiselev) ==== +
- +
-^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  | +
-|Xi 8088 PCB|20|$25|Todd Goodman| ​  | +
-|ISA Backplane PCB|40|$25|Todd Goodman| ​  | +
-|ISA SVGA v1.1 PCB|40|$10|Todd Goodman| ​  | +
-|XT-CF-Lite PCB|30|$12|Todd Goodman| ​  | +
-|ISA OPL2 PCB|40|$10|Todd Goodman| ​  | +
-|ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  | +
-|Micro 8088 PCB|0|$20|Sergey Kiselev| ​  | +
-|ISA 8-Bit Backplane ​PCB|0|$10|Sergey Kiselev| ​  | +
- +
-===== Other (formerly known as "​Mini"​) Boards ===== +
- +
-^  **Board / Component** ​   ^  **Stock** ​   ^  **Price** ​   ^  **Order Contact** ​   ^  **Notes** ​   | +
-|[[:​boards:​other:​ppide|PPIDE]]|   | |   ​| ​  | +
-|PPISD|20|$5|Todd Goodman| ​  | +
-|AT2XTKBD|20|$5|Todd Goodman| | +
-|ECB to Z80 Socket Adapters| ​  ​|$5| ​  ​| ​  | +
-|Juha SD|   ​|$5| ​  ​| ​  | +
-|SCSI2IDEv2|40|$10|Todd Goodman| ​  | +
-|XT-IDE (ISA Bus)|0|$12|Todd Goodman|Not sure about reordering, new version created by someone on VCF  | +
-|XT-FDC|40|$12|Todd Goodman| ​  | +
-|[[https://retrobrewcomputers.org/n8vem-pbwiki-archive/​0/​35845334/​48860720/​37113829/​index.htm|MSX EPROM Cartridge]]|   ​|$5  |   | +
-|Zeta/​Z80-2-ECB Prototypes|2|$12|Andrew Bingham|   | +
-|[[https://retrobrewcomputers.org/n8vem-pbwiki-archive/​0/​35845334/​38282303/​95749082/​index.htm|Elm GAL Programmer]]|  2 \\   \\ 8 5 € \\   \\ 5 Jordi Solis \\   ​\\ Phillip Summers ​[[http://​elm-chan.org/​works/​pgal/​report_e.html|http://​elm-chan.org/​works/​pgal/​report_e.html]] ​ \\   ​\\  ​[[http://www.retrotechnology.com/herbs_stuff/​gal.html|http://​www.retrotechnology.com/​herbs_stuff/​gal.html]] \\   ​\\ ​ [[https://​retrobrewcomputers.org/n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices ​v1.6.pdf|https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf]]  | +
-|CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board  ​+
-|[[:​boards:​other:​idecf2din:​start|CF-IDE daughterboard]] for MPU302|2|$12|Bill Shen|Assembled and tested, CF disk not included. ​ | +
-|[[:​builderpages:​plasmo:​z280rc|Z280RC]],​ Z280 for RC2014|4|$50|Bill Shen|Assembled and tested, include CP2102 USB adapter and 128Meg CF loaded with software ​ | +
-|MC14500 board|7|$5|Richard Edwards|1bit "​CPU"​ board. ​ | +
-|KIM Uno Board only|8|$5US|Michael Cvet.|Kim Uno Board using Arduino see [[http://obsolescence.wixsite.com/obsolescence/kim-uno-get-or-build-one|Tronixlabs ​]](you can purchase kits from there also). I only have blank PC boards from an order I placed. Postage FREE to Aust. and US for 1 board.  ​| +
-|SYM-1 Maxi Board|2|$20US|Michael Cvet.|SYM-1 Maxi board, serial clone of SYM-1 board. [[https://​sites.google.com/​site/​gogleoops/​sym-1-maxi|See Old Micros website]]. Postage FREE to Aust and US for 1 board. ​ | +
-|[[https://​hackaday.io/​Just4Fun|uTerm-S]]|4|5AUD|Phil Summers|Just4Fun'​s VT100 VGA Serial terminal ​ +
-|[[https://​velesoft.speccy.cz/​data-gear.htm|Datagear DMA board]]|4|$3US|Phil Summers|Datagear DMA piggy back board.  ​|+
  
 ===== Chips/​Components ===== ===== Chips/​Components =====
Line 342: Line 272:
 |Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| | |Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| |
 |Rich Cini|rich.cini <at> gmail.com| |29 July 2014| | |Rich Cini|rich.cini <at> gmail.com| |29 July 2014| |
-|John Coffman|johninsd <at> gmail <dot> com|USA|07 Feb 2020|jcoffman| +|John Coffman|johninsd <at> gmail <dot> com|USA|12 May 2020|jcoffman| 
-|Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com| |18 Mar 2017| |+|Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com|USA|21 Jun 2020|tgoodman|
 |Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| | |Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| |
 |Sergey Kiselev|skiselev:​gmail/​com (replace ':'​ with '​@'​ and '/'​ with '​.'​)| |28 Jul 2015| | |Sergey Kiselev|skiselev:​gmail/​com (replace ':'​ with '​@'​ and '/'​ with '​.'​)| |28 Jul 2015| |
boardinventory.1585288349.txt.gz · Last modified: 2020/03/27 01:52 by craig
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0