Differences

This shows you the differences between two versions of the page.

Link to this comparison view

boards:ecb:backplane-505-6508:partslist [2015/10/31 00:46] (current)
admin created
Line 1: Line 1:
 +====== Parts List ======
  
 +<​file>​
 +eeschema (2011-07-12 BZR 3047)-stable ​ >> Creation date: Wed 15 Apr 2014
 +
 +*   = with 505-6508 chassis; 100K grounding resistor used
 +**  = use with external +5v switching power supply
 +@@  = install for Kontron compatible Reset operation:
 +
 +DIN
 +96-pin ​ N8VEM legacy ​           Kontron compatible
 +
 +C-31    output from CPU         input to CPU board
 +        peripheral reset
 +
 +C-26    not used                output from CPU board
 +                         peripheral reset
 +
 +
 +If you are not sure, use N8VEM legacy; i.e., don't stuff the switch or 2-pin connector.
 +
 +
 +
 +#Cmp ( order = Reference )
 +   | BAT1       ​SN2032 socket ​  ​optional 3v Lithium battery socket
 +   | C1-22      0.1 uF      monolithic or ceramic
 +   | C23        22uF        electrolytic (22uF up to 100uF) ​   ​
 +   | C26        0.1uF to  0.47uF monolithic or ceramic
 +   | D1         ​LED ​        Green (VCC)
 +   | D2         ​LED ​        Red (+5v)
 +   | D6         ​LED ​        ​Yellow (+12v)
 +   | JP1        CONN_3 ​     backplane battery power source selection
 +** | P2         ​POWER ​      Molex 4-pin IBM peripheral connector
 +   | P50        CONN_2 ​     external battery connector
 +@@ | P81        RESET       ​external Reset connector (Kontron)
 +   | R1         470 ohm 1/4 W        ​
 +   | R2         330 ohm 1/4 W         
 +   | R3         1000 ohm 1/4 W -- up to 4.7K, if yellow is too bright for you     
 +*  | R4         ​100K ​       use with Siemens 505-6508 chassis
 +*  | SW1        POWER       use #18 copper wire short circuit if Siemens chassis to be used 
 +@@ | SW2        SW_PUSH ​    ​Kontron reset only 
 +   | U0-11      C96ABC ​     96-pin female DIN 41612 connector
 +#End Cmp
 +
 +The LED colors are suggested: ​ Yellow corresponds to the +12v yellow wire on the IBM power connector, Red to the +5 wire, and Green for GO: "Vcc Power On" the backplane connectors.
 +
 +
 +
 +#End List
 +</​file>​
boards/ecb/backplane-505-6508/partslist.txt · Last modified: 2015/10/31 00:46 by admin
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0