Differences

This shows you the differences between two versions of the page.

--- boards:ecb:bus-monitor:start [2016/02/27 16:29]
admin
+++ boards:ecb:bus-monitor:start [2016/04/16 20:48] (current)
admin
@@ Line 2: / Line 2: @@
 {{:boards:ecb:bus-monitor:photos:img_8000.jpg?nolink&640|}}
 {{:boards:ecb:bus-monitor:photos:n8vem-busmonitor-front-300dpi.png?nolink&640|}}
 ===== Introduction =====
@@ Line 31: / Line 30: @@
 ===== Build Information =====
 ==== Parts List ====
 {{:boards:ecb:bus-monitor:bus_monitor_parts_list_clean.pdf|Parts List - PDF}}
@@ Line 39: / Line 36: @@
 ==== LED Labels ====
 {{:boards:ecb:bus-monitor:ecb_led_labels.xls|LED Labels}}
 ==== Default Positions of Switches ====
+From: Don Caprio <ilvu...@gmail.com> \\
+Date: Sat, 02 Apr 2011 16:22:25 -0700 \\
+Local: Sat, Apr 2 2011 7:22 pm \\
+Subject: Re: [N8VEM: 9121] Re: ECB Bus Monitor \\
-<file>
-From: Don Caprio <ilvu...@gmail.com>
+Hey, I got my bus monitor working. That is lights blink, status and data LED's are responsive. Address LED's flicker during boot and running CP/M commands.
-Date: Sat, 02 Apr 2011 16:22:25 -0700
-Local: Sat, Apr 2 2011 7:22 pm
-Subject: Re: [N8VEM: 9121] Re: ECB Bus Monitor
+This was totally a high tech approach :) I looked at the home page of the N8VEM. You see a picture of the bus monitor. If you look very closely you can pretty much tell
-Hey, I got my bus monitor working. That is lights blink, status and data LED's
+what the position of the switches are. I set mine as pictured and it now it works. I still would like to know what the switches are and what functions they provide.
-are responsive. Address LED's flicker during boot and running CP/M commands.
-This was totally a high tech approach :) I looked at the home page of the N8VEM.
-You see a picture of the bus monitor. If you look very closely you can pretty much tell
-what the position of the switches are. I set mine as pictured and it now it works.
-I still would like to know what the switches are and what functions they provide.
 Set all address switches to ON (SW_1_2 & SW_3_4).
@@ Line 65: / Line 55: @@
 Turn switch position 5 ON  (SW2)
 Turn switch position 4 and 5 ON (SW1)
-</file>
 ==== Notes on Operation ====
-''
 For what it's worth, what I've been able to decode from the schematic is as follows:
@@ Line 87: / Line 74: @@
 I hope this helps!
 PCP
-''
-===== Videos Demonstrating Operation =====
+==== Videos Demonstrating Operation ====
 See the [[boards:ecb:bus-monitor:videos|ECB Bus Monitors Videos]] page for a set of videos showing the operation of this board.
 ===== Photo Gallery =====
-{{gallery>boards:ecb:bus-monitor:photos:?&0 }}
+{{gallery>photos?&0  }}
 ===== File List =====
+{{filelist>*&style=table&tableheader=1&tableshowdate=1&tableshowsize=1}}
-{{filelist>*.*&style=table&tableheader=1&tableshowdate=1&tableshowsize=1}}