Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
boards:other:ppide [2019/01/13 20:26]
b1ackmai1er
boards:other:ppide [2019/01/16 01:18] (current)
b1ackmai1er [Current Version]
Line 1: Line 1:
 ====== PPIDE ====== ====== PPIDE ======
  
-Legacy archive: [[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/0/35845334/35845372/35846055/index.htm|https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/35845372/35846055/​index.htm]]+The PPIDE board is an interface board designed to connect IDE devices such as hard drives and Compact Flash cards to a computer through the parallel expansion connector.. 
 + 
 +===== Features ===== 
 + 
 +  * Compatible with SBC V2, SBC-188 and Zeta computers. 
 +  * Does not require an ECB backplane to operate. 
 +  * Software support in ROMWBW and CP/M. 
 + 
 +===== Pictures ===== 
 + 
 +{{https://www.retrobrewcomputers.org/​lib/plugins/ckgedit/fckeditor/userfiles/image/​boards/​other/​ppide/​mini_ppide.jpg?​nolink&​800x448|www.retrobrewcomputers.org_lib_plugins_ckgedit_fckeditor_userfiles_image_boards_other_ppide_mini_ppide.jpg}} 
 + 
 +[[:​boards:​other:​ppide:​gallery|Gallery]] 
 + 
 + 
 +===== Current Version ===== 
 + 
 +The current [[https://n8vem.narkive.com/​S6iu5dyr/n8vem-18636-mini-ppide-boards-new-layout-sbc-188-sbcv2|version ]]was designed by [[https://thezippsterzone.com/about-me/|Ed Snider ​]]and incorporate layout changes for mounting within the base board footprint without blocking access to adjacent connectors. 
 + 
 + 
 +===== Acknowledgements ===== 
 + 
 +Max Scan developed the original design and pcb board with software support provided by David Giles and Wayne Warthen. 
 + 
 +====== Hardware Documentation ====== 
 + 
 + 
 +===== Board =====
  
 {{:​boards:​other:​ppide:​ppidegerbers.zip|:​boards:​other:​ppide:​ppidegerbers.zip}} {{:​boards:​other:​ppide:​ppidegerbers.zip|:​boards:​other:​ppide:​ppidegerbers.zip}}
Line 7: Line 34:
 [[https://​oshpark.com/​shared_projects/​is8CiGZf|https://​oshpark.com/​shared_projects/​is8CiGZf]] [[https://​oshpark.com/​shared_projects/​is8CiGZf|https://​oshpark.com/​shared_projects/​is8CiGZf]]
  
-{{gallery>ppide}}+===== Schematics ===== 
 + 
 +{{:​boards:​other:​ppide:​ppide-schematic.pdf|:​boards:​other:​ppide:​ppide-schematic.pdf}} 
 + 
 + 
 +===== Parts ===== 
 + 
 +^Desg^Part^Qty| 
 +| |74LS14|1| 
 +| |14-pin DIP narrow socket|1| 
 +| |26-pin header (13×2)|1| 
 +| |0.1uf (100 nF) Ceramic Capacitor|1| 
 +| |40-pin right angle header (20×2)|1| 
 +| |LED|1| 
 +| |470R Resistor|1| 
 +| |4-pin power connector|1| 
 +|JP2|2-pin header|1| 
 +|KP1|1x 3-pin header|1| 
 + 
 +Substitute male IDC headers if remote mounting with flying leads is desired. 
 + 
 +\\ 
 + 
 + 
 +====== Resources ====== 
 + 
 +Legacy archive: [[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​35845372/​35846055/​index.htm|https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​35845372/​35846055/​index.htm]]
  
  
boards/other/ppide.1547429162.txt.gz · Last modified: 2019/01/13 20:26 by b1ackmai1er
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0