Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
boards:other:ppide [2019/01/16 00:50]
b1ackmai1er [Current Version]
boards:other:ppide [2020/10/22 06:57] (current)
mscane [Acknowledgements]
Line 19: Line 19:
  
 The current [[https://n8vem.narkive.com/S6iu5dyr/n8vem-18636-mini-ppide-boards-new-layout-sbc-188-sbcv2|version ]]was designed by [[https://thezippsterzone.com/about-me/|Ed Snider ]]and incorporate layout changes for mounting within the base board footprint without blocking access to adjacent connectors. The current [[https://n8vem.narkive.com/S6iu5dyr/n8vem-18636-mini-ppide-boards-new-layout-sbc-188-sbcv2|version ]]was designed by [[https://thezippsterzone.com/about-me/|Ed Snider ]]and incorporate layout changes for mounting within the base board footprint without blocking access to adjacent connectors.
 +
 +
 +===== Acknowledgements =====
 +
 +Max Scane developed the original design and pcb board with software support provided by David Giles and Wayne Warthen.
 +
 +
 +====== Hardware Documentation ======
 +
 +
 +===== Board =====
  
 {{:boards:other:ppide:ppidegerbers.zip|:boards:other:ppide:ppidegerbers.zip}} {{:boards:other:ppide:ppidegerbers.zip|:boards:other:ppide:ppidegerbers.zip}}
Line 24: Line 35:
 [[https://oshpark.com/shared_projects/is8CiGZf|https://oshpark.com/shared_projects/is8CiGZf]] [[https://oshpark.com/shared_projects/is8CiGZf|https://oshpark.com/shared_projects/is8CiGZf]]
  
 +===== Schematics =====
  
-===== Acknowledgements =====+{{:boards:other:ppide:ppide-schematic.pdf|:boards:other:ppide:ppide-schematic.pdf}} 
 + 
 + 
 +===== Parts ===== 
 + 
 +^Desg^Part^Qty| 
 +| |74LS14|1| 
 +| |14-pin DIP narrow socket|1| 
 +| |26-pin header (13×2)|1| 
 +| |0.1uf (100 nF) Ceramic Capacitor|1| 
 +| |40-pin right angle header (20×2)|1| 
 +| |LED|1| 
 +| |470R Resistor|1| 
 +| |4-pin power connector|1| 
 +|JP2|2-pin header|1| 
 +|KP1|1x 3-pin header|1| 
 + 
 +Substitute male IDC headers if remote mounting with flying leads is desired. 
 + 
 +\\
  
-Max Scan developed the original design and pcb board with software support provided by David Giles and Wayne Warthen. 
  
-===== Resources =====+====== Resources ======
  
 Legacy archive: [[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/35845372/35846055/index.htm|https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/35845372/35846055/index.htm]] Legacy archive: [[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/35845372/35846055/index.htm|https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/35845372/35846055/index.htm]]
  
  
boards/other/ppide.1547617842.txt.gz · Last modified: 2019/01/16 00:50 by b1ackmai1er
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0