This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
This page only contains updated information specific to rev 2 pc board. For general description of Tiny68K, please refer to this page.
Tiny68K is a high-performance yet low-cost single board computer based on the Motorola 68000. Revision 2 of Tiny68K has the following changes:
Figure below shows an assembled rev 2 Tiny68K with annotations showing the changes from rev1 design.
schematic, the schematic and board layout tools are IVEX's WinBoard and WinDraft (ver 2.05)
gerber photo plots, pc boards were manufactured by SeeedStudio
Altera EPM7128 design files. Designs are created in Quartus 8.1, should be compatible with later version of Quartus. Designs are entirely in schematics. Schematic in PDF format. Programming binary in .pof format.
Tiny68K Monitor debugger. The software is developed in the EASy68K tool chain. File with .bin extension is the programming binary for serial EEPROM programmer (CH341).