Differences

This shows you the differences between two versions of the page.

--- builderpages:jonas_edin:start [2020/03/27 04:39]
jonas.edin_telia.com
+++ builderpages:jonas_edin:start [2020/03/31 08:03] (current)
jonas.edin_telia.com
@@ Line 45: / Line 45: @@
 |Micro 8088|Running| \\ A compact and stable system at 9.55 MHz with NEC V20, i8087, Sergey's SVGA, Floppy Disk and Serial Controller and XT-CF Lite. I have tested a lot of DOS and Windows software, including AutoCAD, Windows 3.0, Windows286/2.11, Word Perfect, Word, Works, Excel, Lotus 123, Quattro Pro, Paradox, FoxPro, Aldus Pagemaker, CorelDraw, et cetera, et cetera. \\   \\ A lot of so called abandonware can be found here: [[http://winworldpc.org|http://winworldpc.org]] \\   \\  I am using USE!UMBS.SYS and DosMax. Only 10 kB below 640 kB after booting MS-DOS 6.22! \\  I must build an EMS-board or two. \\   \\  [[https://www.lo-tech.co.uk/wiki/Lo-tech_2MB_EMS_Board|https://www.lo-tech.co.uk/wiki/Lo-tech_2MB_EMS_Board]]  |
 |ISA Backplane|Running|Alive|
-|ISA SVGA PCB|Running|Tested in Xi 8088 and in my 286. I have built two of them. The TVGA9000i is a 160-pin millipede, but surface mount is easy with some practice, a good soldering iron, flux and reading glasses. Just solder it! Listening to (or reading) some good advice is recommended.|
+|ISA SVGA PCB|Running|Tested in Xi 8088, Micro 8088 and my 286. I have built two of them. The TVGA9000i is a 160-pin millipede, but surface mount is easy with some practice, a good soldering iron, flux and reading glasses. Just solder it! Listening to (or reading) some good advice is recommended.|
 |ISA OPL2|Running|Tested with Castle Wolfenstein (286+). I hear music!|
 |ISA Floppy Disk and Serial Controller PCB  |Running|Tested in Xi 8088 and Micro 8088|
-|ISA XT-CF-Lite|Running|With Micro 808|
+|ISA XT-CF-Lite|Running|With Micro 8088|
-|ISA XT-IDE V2, x2|Assembled|Alive|
+|ISA XT-IDE V2, x2|Assembled| |
 |ISA XT-IDE V4  |Assembled  |   |
 |   |   |   |