This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
MicroZ is based on Micro80, but repackaged for the Arduino mega enclosure.
This is a classical microprocessor design with EPROM and RAM. At reset the EPROM copies itself into RAM and then jump into RAM. The Z84C15 has two programmable chip selects that are used to page out the EPROM or change RAM banks.
CP/M 2.2 BIOS/BDOS/CCP
CP/M 2.2 distribution files
Getting started with MicroZ
MicroZ Monitor manual
Installing software on a new DOM