Table of Contents
QuadSer, Module with 4 Serial Ports for RC2014
Introduction
QuadSer is a module based on OX16C954, Quad UART with 128-byte FIFOs.
This is link to rev1 of QuadSer.
This is link to rev2 of QuadSer
Features
- OX16C954 with Quad UART each with 128-byte FIFOs
- I/O address is hardwired to 0xC0-0xDF
- For RC2014 bus
Design Information
Gerber Photoplots
Software
Loopback diagnostic software
Documentation
OX16C954 Data sheet
Software examples for OX16C95x