Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
builderpages:plasmo:tinyz280:getting_started [2018/03/29 09:19]
plasmo
builderpages:plasmo:tinyz280:getting_started [2018/03/29 09:34] (current)
plasmo
Line 14: Line 14:
   * Refer to manual for software installation on a new CF   * Refer to manual for software installation on a new CF
   * when power is applied, the expected current is 300mA-400mA   * when power is applied, the expected current is 300mA-400mA
-  * The RTC (U9) is not populated but the board is ready for the DS12887 RTC.  The 128 registers of DS12887 are mapped to Z280's I/O space 0x00xx00-0x00xx7F+  * The RTC (U9) is not populated but the board is ready for the DS12887 RTC. The 128 registers of DS12887 are mapped to Z280's I/O space 0x00xx00-0x00xx7F
  
 ===== ZZMon ===== ===== ZZMon =====
Line 26: Line 26:
 ZZMon commands are single letter either upper case or lower case. Depending on the commands, the monitor software will prompt for additional actions. ZZMon commands are single letter either upper case or lower case. Depending on the commands, the monitor software will prompt for additional actions.
  
-**H**  gives short list of ZZMon commands+**H**  gives short list of ZZMon commands
 + 
 +//>help \\ G <​addr>​ CR \\ R <​track>​ <​sector>​ \\ D <start addr> <end addr> \\ Z CR \\ F CR \\ T CR \\ E <​addr>​ \\ X <​options>​ CR \\ B <​options>​ CR \\ C <​options>​ CR// 
 + 
 +//>//
  
 Detailed description of ZZMon commands are in [[:​builderpages:​plasmo:​tinyz280:​zzmon_manual|ZZMon manual]]. Detailed description of ZZMon commands are in [[:​builderpages:​plasmo:​tinyz280:​zzmon_manual|ZZMon manual]].
Line 32: Line 36:
 ===== CP/M ===== ===== CP/M =====
  
-the command to go to CP/M are\\ b2 to cp/m2.2+To boot CP/M 2.2 type: 
 + 
 +**b2 (press enter to execute)**
  
 //Copyright 1979 © by Digital Research \\ CP/M 2.2 for TinyZ280 \\ 3/25/18 3.5 meg RAMDisk// //Copyright 1979 © by Digital Research \\ CP/M 2.2 for TinyZ280 \\ 3/25/18 3.5 meg RAMDisk//
 +
 +//a>//
  
 CP/M 2.2 distribution files are in drive B: CP/M 2.2 distribution files are in drive B:
  
- \\ b3 to boot cp/m3+//a>b: \\ b>dir \\ B: ASM  COM : BIOS     ASM : CBIOS    ASM : DDT      COM \\ B: DEBLOCK ​ ASM : DISKDEF ​ LIB : DUMP     COM : DUMP     ASM \\ B: ED  COM : LOAD     COM : MOVCPM ​  COM : PIP      COM \\ B: STAT  COM : SUBMIT ​  COM : SYSGEN ​  COM : XSUB     COM \\ b>// 
 + 
 +---- 
 + 
 +To boot CP/M 3 (non banked), type: 
 + 
 +**b3 (press enter to execute)** 
 + 
 +//CP/M V3.0 Loader \\ Copyright (C) 1998, Caldera Inc. \\  \\ BIOS3 SPR E800 1000 \\ BDOS3 SPR C900 1F00 \\  \\ 50K TPA \\ Copyright 1979 © by Digital Research \\ CP/M 3 for TinyZ280 3/25/18 3.5meg RAMdisk \\ A> dir \\ A: BDOS3  SPR : BIOS3    SPR : BIOSKRNL ASM : BNKBDOS3 SPR : BOOT     ASM \\ A: CALLVERS ASM : CBIOS3 ​ REL : CCP      COM : CHARIO ​  ASM : COPYSYS ​ ASM \\ A: COPYSYS ​ COM : CPM3     LIB : CPM3     SYS : CPMLDR ​  REL : DATE     COM \\ A: DEVICE ​ COM : DIR      COM : DIRLBL ​  RSX : DRVTBL ​  ASM : DUMP     ASM \\ A: DUMP  COM : ECHOVERS ASM : ED       COM : ERASE    COM : FD1797SD ASM \\ A: GENCOM ​ COM : GENCPM ​  COM : GET      COM : HELP     COM : HELP     HLP \\ A: HEXCOM ​ COM : HIST     UTL : INITDIR ​ COM : LDRBIOS ​ REL : LIB      COM \\ A: LINK  COM : MAC      COM : MODEBAUD LIB : MOVE     ASM : PATCH    COM \\ A: PIP  COM : PORTS    LIB : PUT      COM : RANDOM ​  ASM : RENAME ​  COM \\ A: RESBDOS3 SPR : RMAC  COM : SAVE     COM : SCB      REL : SET      COM \\ A: SETDEF ​ COM : SHOW     COM : SID      COM : SUBMIT ​  COM : TRACE    UTL \\ A: TYPE  COM : XMODEM ​  COM : XREF     COM \\ A>// 
 + 
 +CP/M3 distribution files are stored in drive A and another copy in drive C. 
 + 
 +===== RAM Drive ===== 
 + 
 +Drive E is the RAM drive. ​ The 3.5meg CP/M RAM drive is physically located in memory 0x80000-0x3FFFFF. ​ RAM drive'​s directory needs to be initialized to 0xE5.  This is done with ZZMon using the command:
  
-//CP/M V3.0 Loader \\ Copyright ​(C1998, Caldera Inc. \\  \\ BIOS3 SPR E800 1000 \\ BDOS3 SPR C900 1F00 \\  \\ 50K TPA \\ Copyright 1979 © by Digital Research \\ CP/M 3 for TinyZ280 3/25/18 3.5meg RAMdisk \\ A> //+**xE (press enter to execute)**  <-please note the drive letter E must be in upper case.
  
  
builderpages/plasmo/tinyz280/getting_started.txt · Last modified: 2018/03/29 09:34 by plasmo
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0