Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
builderpages:plasmo:z280rc [2018/10/02 08:29]
plasmo
builderpages:plasmo:z280rc [2018/12/02 23:37] (current)
plasmo
Line 62: Line 62:
   * ZZMon – {{:​builderpages:​plasmo:​z280rc:​zzmon_099.zip|monitor}} ​ rev 0.99 for Z280RC. Assembled with Zilog ZDS v3.68   * ZZMon – {{:​builderpages:​plasmo:​z280rc:​zzmon_099.zip|monitor}} ​ rev 0.99 for Z280RC. Assembled with Zilog ZDS v3.68
   * LoadnGo – {{:​builderpages:​plasmo:​z280rc:​loadngo.zip|load file}} ​ to start up ZZMon in UART bootstrap mode   * LoadnGo – {{:​builderpages:​plasmo:​z280rc:​loadngo.zip|load file}} ​ to start up ZZMon in UART bootstrap mode
-  * CP/M2.2, {{:​builderpages:​plasmo:​tinyz280:​cpm22all_asm.zip|CPM22ALL}} ​ to be assembled with Zilog ZDS v3.68. This is the entire CP/M2.2 including BDOS, CCP, and BIOS +  * CP/M2.2, {{:​builderpages:​plasmo:​z280rc:​cpm22all_asm.zip|CPM22ALL}} ​ to be assembled with Zilog ZDS v3.68. This is the entire CP/M2.2 including BDOS, CCP, and BIOS 
-  * CP/M2.2 {{:​builderpages:​plasmo:​tinyz280:​cpm22all_hex_loadfile.zip|Intel Hex load file}} ​ to be loaded by ZZMon at location 0xDC00-0xFFFF and then copy to CF track 0 using the '​C2'​ command+  * CP/M2.2 {{:​builderpages:​plasmo:​z280rc:​cpm22all_hex_loadfile.zip|Intel Hex load file}} ​ to be loaded by ZZMon at location 0xDC00-0xFFFF and then copy to CF track 0 using the '​C2'​ command
   * CP/M3 {{:​builderpages:​plasmo:​tinyz280:​ldrbios.zip|LDRBIOS}} ​ to be assembled with ZMAC into LDRBIOS.REL and then linked in CP/M as follow: LINK CPMLDR[L100]=CPMLDR,​ LDRBIOS   * CP/M3 {{:​builderpages:​plasmo:​tinyz280:​ldrbios.zip|LDRBIOS}} ​ to be assembled with ZMAC into LDRBIOS.REL and then linked in CP/M as follow: LINK CPMLDR[L100]=CPMLDR,​ LDRBIOS
   * CP/M3 {{:​builderpages:​plasmo:​tinyz280:​cbios3.zip|CBIOS3}} ​ (non-banked) to be assembled with ZMAC into CBIOS3.REL and then linked in CP/M as follow: LINK BIOS3[OS]=CBIOS3,​SCB   * CP/M3 {{:​builderpages:​plasmo:​tinyz280:​cbios3.zip|CBIOS3}} ​ (non-banked) to be assembled with ZMAC into CBIOS3.REL and then linked in CP/M as follow: LINK BIOS3[OS]=CBIOS3,​SCB
builderpages/plasmo/z280rc.txt · Last modified: 2018/12/02 23:37 by plasmo
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0