Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
builderpages:plasmo:z80mb64 [2020/01/07 12:52]
plasmo
builderpages:plasmo:z80mb64 [2020/01/10 22:17] (current)
plasmo
Line 44: Line 44:
 {{:​builderpages:​plasmo:​z80sbc64:​z80sbcld.zip|Z80SBCLD}} ​ is the bootstrap loader. Configure Z80MB64 to Serial Bootstrap mode and send Z80SBCLD.BIN as binary file to Z80MB64 immediately after reset. Z80MB64 will respond with “**Z80SBC64 Loader v0.3**” sign on message and ready to receive ZMon64 load file. Once ZMon64 is loaded, it will start program execution at 0xB400 which is the entry point of ZMon64. {{:​builderpages:​plasmo:​z80sbc64:​z80sbcld.zip|Z80SBCLD}} ​ is the bootstrap loader. Configure Z80MB64 to Serial Bootstrap mode and send Z80SBCLD.BIN as binary file to Z80MB64 immediately after reset. Z80MB64 will respond with “**Z80SBC64 Loader v0.3**” sign on message and ready to receive ZMon64 load file. Once ZMon64 is loaded, it will start program execution at 0xB400 which is the entry point of ZMon64.
  
-{{:​builderpages:​plasmo:​z80sbc64:​zmon64_r0_6.zip|ZMon64 rev 0.6}}, improve the '​R'​ command, add '​c1'​ command to store SCMonitor in RAM and '​b1'​ command to execute the stored SCMonitor. Add '​c3'​ command to store CP/M 3 and '​b3'​ command to execute CP/M 3.+{{:​builderpages:​plasmo:​z80sbc64:​zmon64_r0_7.zip|ZMon64 rev 0.7}}, (updated 1/10/20, minor revision) ​improve the '​R'​ command, add '​c1'​ command to store SCMonitor in RAM and '​b1'​ command to execute the stored SCMonitor. Add '​c3'​ command to store CP/M 3 and '​b3'​ command to execute CP/M 3.
  
 {{:​builderpages:​plasmo:​z80sbc64:​scmonitor.hex|SCMonitor}} ​ is a sophisticated monitor developed by [[https://​smallcomputercentral.com/​|Steve Cousins]]. It has many features, among them a version of MS BASIC that runs well on Z80MB64. After loading the hex file, type '​g0000'​ to start up SCMonitor. {{:​builderpages:​plasmo:​z80sbc64:​scmonitor.hex|SCMonitor}} ​ is a sophisticated monitor developed by [[https://​smallcomputercentral.com/​|Steve Cousins]]. It has many features, among them a version of MS BASIC that runs well on Z80MB64. After loading the hex file, type '​g0000'​ to start up SCMonitor.
Line 76: Line 76:
 Pictorial [[:​builderpages:​plasmo:​z80mb64:​assembly|assembly guide]] Pictorial [[:​builderpages:​plasmo:​z80mb64:​assembly|assembly guide]]
  
-[[:​builderpages:​plasmo:​z80mb64:​NewCFMacro|Creating new CF disk]] for Z80SBC64 and Z80MB64 with a TeraTerm Macro+[[:​builderpages:​plasmo:​z80mb64:​newcfmacro|Creating new CF disk]] for Z80SBC64 and Z80MB64 with a TeraTerm Macro
  
  
builderpages/plasmo/z80mb64.txt · Last modified: 2020/01/10 22:17 by plasmo
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0