Construction Log for ZZ80RC

This is a step-by-step construction of ZZ80RC module. Expected construction time is one hour.

1. Start with a bare board

www.retrobrewcomputers.org_lib_plugins_ckgedit_fckeditor_userfiles_image_builderpages_plasmo_zz80rc_dsc_37330806.jpg

2. Populate serial port connector and IC sockets

dsc_37340806.jpg

3. Add SIP resistors and bypass caps

dsc_37350806.jpg

4. Add resistors and diodes

dsc_37360806.jpg

5. Add RC2014 connector

dsc_37370806.jpg

6. Solder in 1.8432MHz oscillator, voltage supervisor, RESET button, super capacitor and jumper blocks

www.retrobrewcomputers.org_lib_plugins_ckgedit_fckeditor_userfiles_image_builderpages_plasmo_zz80rc_dsc_37380806.jpg

7. Solder PLCC68 socket and 2.1mmx5.5mm power jack

www.retrobrewcomputers.org_lib_plugins_ckgedit_fckeditor_userfiles_image_builderpages_plasmo_zz80rc_dsc_37390806.jpg

8. Populate all components and get ready to power up!

www.retrobrewcomputers.org_lib_plugins_ckgedit_fckeditor_userfiles_image_builderpages_plasmo_zz80rc_dsc_37400807.jpg

builderpages/plasmo/zz80rc/zz80rc_buildlog.txt · Last modified: 2018/08/07 21:34 by plasmo
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0