Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
builderpages:rhkoolstar:mc-2g-1024 [2017/12/24 04:30]
rhkoolstar
builderpages:rhkoolstar:mc-2g-1024 [2017/12/24 06:20] (current)
rhkoolstar
Line 20: Line 20:
   * Included are CP/M 2.2, Dos+ 2.5, CP/M 3.0, MPMII 2.1, ZSDOS 1.1/ZCPR2, ZPM3/ZCCP and NASCOM ROM Basic   * Included are CP/M 2.2, Dos+ 2.5, CP/M 3.0, MPMII 2.1, ZSDOS 1.1/ZCPR2, ZPM3/ZCCP and NASCOM ROM Basic
  
-It runs on the EP2C5T144C8N Cyclone II FPGA and the configuration assumes it to be wired up as indicated on Grant'​s page. You should have wired up 2 serial terminals, an SD-card and at least 512k Memory. \\ James Moxhams Cyclone2 boards will work without modifications. \\ 2 extra serial terminals can be wired to the touch screen connector, using RS-232 or USB converters. \\ You can also use a monochrome (RCA) terminal and 2 serial interfaces. In this case all unused signals need to be commented out. \\  \\ This package contains VHDL updates for+It runs on the EP2C5T144C8N Cyclone II FPGA and the configuration assumes it to be wired up as indicated on Grant'​s page. You should have wired up 2 serial terminals, an SD-card and at least 512k Memory. \\ James Moxhams Cyclone2 boards will work without modifications. \\ 2 extra serial terminals can be wired to the touch screen connector, using RS-232 or USB converters. \\ You can also use a monochrome (RCA) terminal and 2 serial interfaces. In this case all unused signals need to be commented out. Examples of these configurations are included. \\  \\ This package contains VHDL updates for
  
   * ROM monitor; (new concept)   * ROM monitor; (new concept)
Line 30: Line 30:
   * These are available as source files, with additionally,​ the .pof file for the default configuration.   * These are available as source files, with additionally,​ the .pof file for the default configuration.
  
-The package includes all binaries, source files, manuals and instructions for building and running the various operating systems, including tools for the additional features (disk mounting system reset etc.) Pre-configured images are included for system disks and Cyclone programming. \\ The OS specific transient commands are included as binary only.+The package includes all binaries, source files, manuals and instructions for building and running the various operating systems, including tools for the additional features (disk mounting system reset etc.) Pre-configured images are included for system disks and Cyclone programming. \\ The OS specific transient commands are included as binary only. An Open Document Spreadsheet is provided to build custom keymaps.
  
  
builderpages/rhkoolstar/mc-2g-1024.txt · Last modified: 2017/12/24 06:20 by rhkoolstar
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0